pm2fb: mtrr support and noaccel option
PATCH 19/33 pm2fb: mtrr support and noaccel option
From: Krzysztof Helt <[email protected]>
This patch adds usage of MTRR registers and two new options:
noaccel and nomtrr.
Signed-off-by Krzysztof Helt <[email protected]>
Signed-off-by Antonino Daplas <[email protected]>
---
drivers/video/pm2fb.c | 44 ++++++++++++++++++++++++++++++++++++++++++-- 1 files changed, 42 insertions(+), 2 deletions(-)
drivers/video/pm2fb.c +42 -2
@@ -38,6 +38,9 @@ #include <linux/delay.h>#include <linux/fb.h> #include <linux/init.h> #include <linux/pci.h> +#ifdef CONFIG_MTRR +#include <asm/mtrr.h> +#endif #include <video/permedia2.h> #include <video/cvisionppc.h>
@@ -71,8 +74,13 @@ static char *mode __devinitdata = NULL;* these flags allow the user to specify that requests for +ve sync * should be silently turned in -ve sync. */ -static int lowhsync; -static int lowvsync; +static int lowhsync__devinitdata ; +static int lowvsync__devinitdata ; +static int noaccel__devinitdata ; +/* mtrr option */ +#ifdef CONFIG_MTRR +static int nomtrr__devinitdata ; +#endif /* * The hardware state of the graphics card that isn't part of the
@@ -88,6 +96,7 @@ struct pm2fb_paru32 mem_control;/* MemControl reg at probe */ u32 boot_address;/* BootAddress reg at probe */ u32 palette[16 ]; +int mtrr_handle; };/*
@@ -1316,6 +1325,15 @@ #endif goto err_exit_mmio; } +#ifdef CONFIG_MTRR + default_par->mtrr_handle =-1 ; +if (!nomtrr) + default_par->mtrr_handle = +mtrr_add (pm2fb_fix.smem_start, + pm2fb_fix.smem_len, +MTRR_TYPE_WRCOMB ,1 ); +#endif + info->fbops = &pm2fb_ops; info->fix = pm2fb_fix; info->pseudo_palette = default_par->palette;
@@ -1324,6 +1342,11 @@ #endifFBINFO_HWACCEL_COPYAREA |FBINFO_HWACCEL_FILLRECT ; +if (noaccel) { +printk (KERN_DEBUG "disabling acceleration\n" ); + info->flags |=FBINFO_HWACCEL_DISABLED ; + } +if (!mode) mode ="640x480@60" ;
@@ -1375,6 +1398,11 @@ static void __devexit pm2fb_remove(strucunregister_framebuffer (info); +#ifdef CONFIG_MTRR +if (par->mtrr_handle >=0 ) +mtrr_del (par->mtrr_handle, info->fix.smem_start, + info->fix.smem_len); +#endif /* CONFIG_MTRR */ iounmap (info->screen_base);release_mem_region (fix->smem_start, fix->smem_len);iounmap (par->v_regs);
@@ -1430,6 +1458,12 @@ static int __init pm2fb_setup(char *opti lowhsync =1 ; }else if (!strcmp (this_opt,"lowvsync" )) { lowvsync =1 ; +#ifdef CONFIG_MTRR + }else if (!strncmp (this_opt,"nomtrr" ,6 )) { + nomtrr =1 ; +#endif + }else if (!strncmp (this_opt,"noaccel" ,7 )) { + noaccel =1 ; }else { mode = this_opt; }
@@ -1474,6 +1508,12 @@ module_param(lowhsync, bool, 0);MODULE_PARM_DESC (lowhsync,"Force horizontal sync low regardless of mode" );module_param (lowvsync, bool,0 );MODULE_PARM_DESC (lowvsync,"Force vertical sync low regardless of mode" ); +module_param (noaccel, bool,0 ); +MODULE_PARM_DESC (noaccel,"Disable acceleration" ); +#ifdef CONFIG_MTRR +module_param (nomtrr, bool,0 ); +MODULE_PARM_DESC (nomtrr,"Disable MTRR support (0 or 1=disabled) (default=0)" ); +#endif MODULE_AUTHOR ("Jim Hague <[email protected]>" );MODULE_DESCRIPTION ("Permedia2 framebuffer device driver" );
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/