ARM: dts: rockchip: Add missing cpu operating points for rk3288-tinker
Subsystems (2)
PATCH 1/1 ARM: dts: rockchip: Add missing cpu operating points for rk3288-tinker
From: Jack Chen <[email protected]>
The Tinker Board / S devices use a special chip variant called rk3288-c and use different operating points with a higher max frequency.
So add the missing operating points for Tinker Board / S devices, also increase the vdd_cpu regulator-max-microvolt to 1400000 uV so that the cpu can operate at 1.8 GHz.
--- arch/arm/boot/dts/rk3288-tinker.dtsi | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
arch/arm/boot/dts/rk3288-tinker.dtsi +12 -1
@@ -113,6 +113,17 @@ cpu0-supply = <&vdd_cpu>; }; +&cpu_opp_table { + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <1350000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1400000>; + }; +}; + &gmac { assigned-clocks = <&cru SCLK_MAC>; assigned-clock-parents = <&ext_gmac>;
@@ -175,7 +186,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; regulator-name = "vdd_arm"; regulator-ramp-delay = <6000>; regulator-state-mem {
Signature · 1 line
2.24.0
Hi Jack,
Quoted 10 lines · Jack Chen
From: Jack Chen <[email protected]>
The Tinker Board / S devices use a special chip variant called rk3288-c and use different operating points with a higher max frequency.
So add the missing operating points for Tinker Board / S devices, also increase the
vdd_cpuregulator-max-microvolt to 1400000 uV so that the cpu can operate at 1.8 GHz.Signed-off-by Jack Chen <[email protected]>
This patch looks good to me,
Thanks,
- Kever
Quoted 35 lines
--- arch/arm/boot/dts/rk3288-tinker.dtsi | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)arch/arm/boot/dts/rk3288-tinker.dtsi +12
-1@@ -113,6 +113,17 @@ cpu0-supply = <&vdd_cpu>; }; +&cpu_opp_table { + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <1350000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1400000>; + }; +}; + &gmac { assigned-clocks = <&cru SCLK_MAC>; assigned-clock-parents = <&ext_gmac>;@@ -175,7 +186,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; regulator-name = "vdd_arm"; regulator-ramp-delay = <6000>; regulator-state-mem {
Heiko Stuebner
maintainerAm Montag, 2. Dezember 2019, 16:35:40 CET schrieb Jack Chen:
Quoted 10 lines
From: Jack Chen <[email protected]>
The Tinker Board / S devices use a special chip variant called rk3288-c and use different operating points with a higher max frequency.
So add the missing operating points for Tinker Board / S devices, also increase the
vdd_cpuregulator-max-microvolt to 1400000 uV so that the cpu can operate at 1.8 GHz.Signed-off-by Jack Chen <[email protected]>
applied for 5.6
Thanks
Heiko