Remove sysdev/commproc.h
PATCH v2 5/8 Remove sysdev/commproc.h
Move cpm1 specific prototypes to asm/commproc.h and mpc8xx specific prototypes to asm/mpc8xx.h. Adjust includes accordingly. Remove now unneeded sysdev/commproc.h.
--- arch/powerpc/platforms/8xx/ep88xc.c | 3 +-- arch/powerpc/platforms/8xx/m8xx_setup.c | 1 - arch/powerpc/platforms/8xx/mpc86xads_setup.c | 2 -- arch/powerpc/platforms/8xx/mpc885ads_setup.c | 2 -- arch/powerpc/sysdev/commproc.c | 1 - arch/powerpc/sysdev/commproc.h | 12 ------------ arch/powerpc/sysdev/mpc8xx_pic.c | 1 - drivers/net/fs_enet/mac-scc.c | 1 - include/asm-powerpc/commproc.h | 2 ++ include/asm-powerpc/mpc8xx.h | 7 +++++++ 10 files changed, 10 insertions(+), 22 deletions(-) delete mode 100644 arch/powerpc/sysdev/commproc.h
arch/powerpc/platforms/8xx/ep88xc.c +1 -2
@@ -16,8 +16,7 @@#include <asm/io.h> #include <asm/udbg.h> #include <asm/commproc.h> - -#include <sysdev/commproc.h> +#include <asm/mpc8xx.h> struct cpm_pin {int port, pin, flags;
arch/powerpc/platforms/8xx/m8xx_setup.c +0 -1
@@ -25,7 +25,6 @@#include <mm/mmu_decl.h> #include <sysdev/mpc8xx_pic.h> -#include <sysdev/commproc.h> #ifdef CONFIG_PCMCIA_M8XX struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
arch/powerpc/platforms/8xx/mpc86xads_setup.c +0 -2
@@ -27,8 +27,6 @@#include <asm/fs_pd.h> #include <asm/udbg.h> -#include <sysdev/commproc.h> -#include "mpc86xads.h" struct cpm_pin {
arch/powerpc/platforms/8xx/mpc885ads_setup.c +0 -2
@@ -40,8 +40,6 @@#include <asm/fs_pd.h> #include <asm/udbg.h> -#include <sysdev/commproc.h> -static u32 __iomem *bcsr, *bcsr5;#ifdef CONFIG_PCMCIA_M8XX
arch/powerpc/sysdev/commproc.c +0 -1
@@ -30,7 +30,6 @@#include <linux/interrupt.h> #include <linux/irq.h> #include <linux/module.h> -#include <asm/mpc8xx.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/8xx_immap.h>
arch/powerpc/sysdev/commproc.h deleted +0 -12
@@ -1,12 +0,0 @@ -#ifndef _POWERPC_SYSDEV_COMMPROC_H -#define _POWERPC_SYSDEV_COMMPROC_H - -extern void cpm_reset (void ); -extern void mpc8xx_restart (char *cmd); -extern void mpc8xx_calibrate_decr (void ); -extern int mpc8xx_set_rtc_time (struct rtc_time *tm); -extern void mpc8xx_get_rtc_time (struct rtc_time *tm); -extern void mpc8xx_pics_init (void ); -extern unsigned int mpc8xx_get_irq (void ); - -#endif
arch/powerpc/sysdev/mpc8xx_pic.c +0 -1
@@ -10,7 +10,6 @@#include <asm/irq.h> #include <asm/io.h> #include <asm/8xx_immap.h> -#include <asm/mpc8xx.h> #include "mpc8xx_pic.h"
drivers/net/fs_enet/mac-scc.c +0 -1
@@ -39,7 +39,6 @@#ifdef CONFIG_8xx#include <asm/8xx_immap.h> #include <asm/pgtable.h> -#include <asm/mpc8xx.h> #include <asm/commproc.h> #endif
include/asm-powerpc/commproc.h +2 -0
@@ -89,6 +89,8 @@ extern void cpm_setbrg(uint brg, uint rate);extern void cpm_load_patch (cpm8xx_t *cp); +extern void cpm_reset (void ); +/* Buffer descriptors used by many of the CPM protocols. */ typedef struct cpm_buf_desc {
include/asm-powerpc/mpc8xx.h +7 -0
@@ -11,6 +11,13 @@#ifdef CONFIG_8xx +extern void mpc8xx_restart (char *cmd); +extern void mpc8xx_calibrate_decr (void ); +extern int mpc8xx_set_rtc_time (struct rtc_time *tm); +extern void mpc8xx_get_rtc_time (struct rtc_time *tm); +extern void mpc8xx_pics_init (void ); +extern unsigned int mpc8xx_get_irq (void ); +#ifdef CONFIG_FADS #include <platforms/fads.h> #endif
Signature · 1 line
1.5.3.8
Quoted 6 lines · Jochen Friedrich
Move cpm1 specific prototypes to
asm/commproc.hand mpc8xx specific prototypes toasm/mpc8xx.h. Adjust includes accordingly. Remove now unneededsysdev/commproc.h.Signed-off-by Jochen Friedrich <[email protected]>---
Quoted 10 lines
arch/powerpc/platforms/8xx/ep88xc.c | 3 +-- arch/powerpc/platforms/8xx/m8xx_setup.c | 1 - arch/powerpc/platforms/8xx/mpc86xads_setup.c | 2 -- arch/powerpc/platforms/8xx/mpc885ads_setup.c | 2 -- arch/powerpc/sysdev/commproc.c | 1 - arch/powerpc/sysdev/commproc.h | 12 ------------ arch/powerpc/sysdev/mpc8xx_pic.c | 1 - drivers/net/fs_enet/mac-scc.c | 1 - include/asm-powerpc/commproc.h | 2 ++ include/asm-powerpc/mpc8xx.h | 7 +++++++
Do we really need the prototypes you moved into asm/mpc8xx.h here? can they just live in platforms/8xx/8xx.h or something like that?
- k
Hi Kumar,
Quoted 1 line
Do we really need the prototypes you moved into
asm/mpc8xx.hhere? can they just live inplatforms/8xx/8xx.hor something like that?
At least drivers/pcmcia/m8xx_pcmcia.c uses the symbol m8xx_pcmcia_ops which is conditionally defined in platforms/8xx/m8xx_setup.c. However, this driver currently seems to be broken (doesn't compile neither as built-in nor as module).
Other drivers that include asm/mpc8xx.c are:
drivers/net/fec.c (the include seems to be obsolete, as according to Kconfig
the driver is only built on MPC52xx platforms)drivers/net/fec_8xx (unused, depends on non-existant CONFIG_8XX) drivers/net/fs_enet (i need to check if the include is needed, at all)
I'll have a closer look at this.
Thanks,
Jochen