Skip to contentSkip to conversation

seg fault with 1.0.17rc2

DISCUSSION Jerry Geis 2 participants 10 messages Jun 26, 2008 – Jun 27, 2008

lore
Share & tools
lore

Jerry Geis

author
#0 lore raw

#0 0xb7e892ff in memcpy () from /lib/tls/libc.so.6
#1 0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589
#2 0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736
#3 0xb74ee0a1 in snd_pcm_mmap_read_areas (pcm=0x81de3b8, areas=0xb7125b70, offset=0, size=122) at pcm_mmap.c:151
#4 0xb74e350d in snd1_pcm_read_areas (pcm=0x81de3b8, areas=0xb7125b70, offset=0, size=122, func=0xb74edfd0 <snd_pcm_mmap_read_areas>) at pcm.c:6501 #5 0xb74ed2df in snd_pcm_mmap_readi (pcm=0x81de3b8, buffer=0xb6352a04, size=122) at pcm_mmap.c:236
#6 0xb74dbb14 in snd_pcm_readi (pcm=0x81de110, buffer=0xb6352a04, size=61) at pcm_local.h:526
#7 0xb756279b in alsa_read (chan=0x821c928) at chan_alsa.c:683 #8 0x080855b1 in __ast_read (chan=0x821c928, dropaudio=0) at channel.c:2100

I am using a usb-audio device.

Bus 003 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter Bus 002 Device 002: ID 13fe:1f00
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

I am using this as my asound.conf file

       pcm.usb-audio {
          type hw
          card 0
       }
      
       ctl.usb-audio {
          type hw
          card 0
       }

I am using debian etch 2.6.18-6-486 #1 Fri Jun 6 21:47:01 UTC 2008 i486 GNU/Linux

It works for a couple times then I get the seg fault. I am using the Console output from asterisk.

help? Thanks,

Jerry

#1 lore raw

At Thu, 26 Jun 2008 10:38:57 -0400,

Quoted 5 lines · Jerry Geis

#0 0xb7e892ff in memcpy () from /lib/tls/libc.so.6
#1 0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589

samples = 0 and...

Quoted 3 lines

#2 0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736

... here frames = 122. Something inconsistent around here. snd_pcm_areas_copy() must passe samples=frames when channels=1. Could you check the values via gdb?

Takashi

author
#2 lore raw
Quoted 17 lines · Takashi Iwai

At Thu, 26 Jun 2008 10:38:57 -0400,

Quoted 5 lines · Jerry Geis

#0 0xb7e892ff in memcpy () from /lib/tls/libc.so.6
#1 0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589

samples = 0 and...

Quoted 4 lines

#2 0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736

Quoted 8 lines

... here frames = 122. Something inconsistent around here. snd_pcm_areas_copy() must passe samples=frames when channels=1. Could you check the values via gdb?

Takashi

Takashi,

I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly.

Is there a better asound.conf to use?
How can I help?

Jerry

#3 lore raw

At Thu, 26 Jun 2008 12:03:24 -0400,

Quoted 26 lines · Jerry Geis
Quoted 22 lines · Takashi Iwai

At Thu, 26 Jun 2008 10:38:57 -0400,

Quoted 5 lines · Jerry Geis

#0 0xb7e892ff in memcpy () from /lib/tls/libc.so.6
#1 0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589

samples = 0 and...

Quoted 4 lines

#2 0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736

... here frames = 122. Something inconsistent around here. snd_pcm_areas_copy() must passe samples=frames when channels=1. Could you check the values via gdb?

Quoted 8 lines
Quoted 3 lines

Takashi

Takashi,

I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly.

Check whether frames still 122 in frame#1, for example.

Quoted 1 line

Is there a better asound.conf to use?

The strange thing is that the recent config for usb-audio also uses dmix/dsnoop. And you don't get any errors with the system-default config?

Takashi

author
#4 lore raw
Quoted 47 lines · Takashi Iwai

At Thu, 26 Jun 2008 12:03:24 -0400,

Quoted 31 lines · Jerry Geis
Quoted 19 lines · Takashi Iwai

At Thu, 26 Jun 2008 10:38:57 -0400,

Quoted 6 lines · Jerry Geis

#0 0xb7e892ff in memcpy () from /lib/tls/libc.so.6
#1 0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589

samples = 0 and...

Quoted 5 lines

#2 0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736

Quoted 9 lines

... here frames = 122. Something inconsistent around here. snd_pcm_areas_copy() must passe samples=frames when channels=1. Could you check the values via gdb?

Takashi

Quoted 6 lines

Takashi,

I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly.

Check whether frames still 122 in frame#1, for example.

Quoted 2 lines

Is there a better asound.conf to use?

Quoted 8 lines

The strange thing is that the recent config for usb-audio also uses dmix/dsnoop. And you don't get any errors with the system-default config?

Takashi

Takashi,

checking frames still 122 in frame #1 is way over my expertise.

With this asound.conf file It plays but choppy audio.

defaults.ctl.card 0
defaults.pcm.card 0

pcm.card0 {
type hw
card 0
}

pcm.dmixer {
type dmix
ipc_key 1025

  slave {
    pcm "hw:0,0"
    period_time 0
    period_size 2048
    buffer_size 32768
    rate 48000
  }
  bindings {
    0 0
    1 1

}
}
pcm.skype {
type asym

playback.pcm "dmixer"
capture.pcm "card0"
}

pcm.!default {
type plug
slave.pcm "skype"
}

Jerry

#5 lore raw

At Thu, 26 Jun 2008 12:46:24 -0400,

Quoted 42 lines · Jerry Geis

Takashi Iwai wrote:

At Thu, 26 Jun 2008 12:03:24 -0400,
Jerry Geis wrote:

Takashi Iwai wrote:

At Thu, 26 Jun 2008 10:38:57 -0400,
Jerry Geis wrote:

#0 0xb7e892ff in memcpy () from /lib/tls/libc.so.6
#1 0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589

samples = 0 and...

#2 0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736

... here frames = 122. Something inconsistent around here. snd_pcm_areas_copy() must passe samples=frames when channels=1. Could you check the values via gdb?

Takashi

Takashi,

I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly.

Check whether frames still 122 in frame#1, for example.

Is there a better asound.conf to use?

The strange thing is that the recent config for usb-audio also uses dmix/dsnoop. And you don't get any errors with the system-default config?

Quoted 7 lines

Takashi

Takashi,

checking frames still 122 in frame #1 is way over my expertise.

With this asound.conf file It plays but choppy audio.

And doesn't it work if you don't define anything, just using the system default?

The bug must be fixed, of course. But I still don't see why you have to redefine the configuration...

Takashi

Quoted 39 lines

defaults.ctl.card 0
defaults.pcm.card 0

pcm.card0 {
type hw
card 0
}

pcm.dmixer {
type dmix
ipc_key 1025

  slave {
    pcm "hw:0,0"
    period_time 0
    period_size 2048
    buffer_size 32768
    rate 48000
  }
  bindings {
    0 0
    1 1

}
}
pcm.skype {
type asym

playback.pcm "dmixer"
capture.pcm "card0"
}

pcm.!default {
type plug
slave.pcm "skype"
}

Jerry

author
#6 lore raw
Quoted 53 lines · Takashi Iwai

At Thu, 26 Jun 2008 12:46:24 -0400,

Quoted 41 lines · Jerry Geis

Takashi Iwai wrote:

At Thu, 26 Jun 2008 12:03:24 -0400,
Jerry Geis wrote:

Takashi Iwai wrote:

At Thu, 26 Jun 2008 10:38:57 -0400,
Jerry Geis wrote:

#0 0xb7e892ff in memcpy () from /lib/tls/libc.so.6
#1 0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589

samples = 0 and...

#2 0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736

... here frames = 122. Something inconsistent around here. snd_pcm_areas_copy() must passe samples=frames when channels=1. Could you check the values via gdb?

Takashi

Takashi,

I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly.

Check whether frames still 122 in frame#1, for example.

Is there a better asound.conf to use?

The strange thing is that the recent config for usb-audio also uses dmix/dsnoop. And you don't get any errors with the system-default config?

Quoted 8 lines

Takashi

Takashi,

checking frames still 122 in frame #1 is way over my expertise.

With this asound.conf file It plays but choppy audio.

Quoted 52 lines

And doesn't it work if you don't define anything, just using the system default?

The bug must be fixed, of course. But I still don't see why you have to redefine the configuration...

Takashi

Quoted 39 lines

defaults.ctl.card 0
defaults.pcm.card 0

pcm.card0 {
type hw
card 0
}

pcm.dmixer {
type dmix
ipc_key 1025

  slave {
    pcm "hw:0,0"
    period_time 0
    period_size 2048
    buffer_size 32768
    rate 48000
  }
  bindings {
    0 0
    1 1

}
}
pcm.skype {
type asym

playback.pcm "dmixer"
capture.pcm "card0"
}

pcm.!default {
type plug
slave.pcm "skype"
}

Jerry

No, thats what I am saying, when I remove the /etc/asound.conf file I get seg faults.
When I run with the above file I get choppy audio but at least 15 times it played with no fault.
I presume the system-default file is have no asound.conf file.

Now also, I am not just doing aplay, which seems to work everytime and audio sounds fine.
I am using the console/dsp from asterisks and playing a wave file through that. Does that help.

How can I help?

Jerry

#7 lore raw

At Thu, 26 Jun 2008 12:59:08 -0400,

Quoted 100 lines · Jerry Geis

Takashi Iwai wrote:

    At Thu, 26 Jun 2008 12:46:24 -0400,
    Jerry Geis wrote:

        Takashi Iwai wrote:
        
            At Thu, 26 Jun 2008 12:03:24 -0400,
            Jerry Geis wrote:
        
                Takashi Iwai wrote:
        
                    At Thu, 26 Jun 2008 10:38:57 -0400,
                    Jerry Geis wrote:
        
                        #0  0xb7e892ff in memcpy () from /lib/tls/libc.so.6
                        #1  0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, 
                        src_area=0x81dc1c0, src_offset=170, samples=0, 
                        format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589
        
                    samples = 0 and...
        
                        #2  0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, 
                        dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, 
                        frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736
        
                    ... here frames = 122.  Something inconsistent around here.
                    snd_pcm_areas_copy() must passe samples=frames when channels=1.
                    Could you check the values via gdb?
        
                    Takashi
        
                Takashi,
                
                I am not sure what your asking me. The output I provided is gdb what else
                can I check? Really anxious to get this USB sound device playing 
                consistantly.
        
            Check whether frames still 122 in frame#1, for example.
        
                Is there a better asound.conf to use?
        
            The strange thing is that the recent config for usb-audio also uses
            dmix/dsnoop.  And you don't get any errors with the system-default
            config?
        
            Takashi
        
        Takashi,
        
        checking frames still 122 in frame #1 is way over my expertise.
        
        With this asound.conf file It plays but choppy audio.

    And doesn't it work if you don't define anything, just using the
    system default?
    
    The bug must be fixed, of course.  But I still don't see why you have
    to redefine the configuration...

    Takashi

        defaults.ctl.card 0
        defaults.pcm.card 0
        
        pcm.card0 {
          type hw
          card 0
        }
        
        pcm.dmixer {
          type dmix
          ipc_key 1025
          slave {
            pcm "hw:0,0"
            period_time 0
            period_size 2048
            buffer_size 32768
            rate 48000
          }
          bindings {
            0 0
            1 1
          }
        }
        pcm.skype {
          type asym
        
          playback.pcm "dmixer"
          capture.pcm "card0"
        }
        
        pcm.!default {
          type plug
          slave.pcm "skype"
        }
        
        Jerry
Quoted 5 lines

No, thats what I am saying, when I remove the /etc/asound.conf file I get seg faults.
When I run with the above file I get choppy audio but at least 15 times it played with no fault.
I presume the system-default file is have no asound.conf file.

OK. Also make sure that you have no ~/.asoundrc file.

Quoted 4 lines

Now also, I am not just doing aplay, which seems to work everytime and audio sounds fine.
I am using the console/dsp from asterisks and playing a wave file through that. Does that help.

The best is to find a simpler test case, such as arecord, because otherwise your problem cannot be reproduced on other environment easily.

Not sure which format and sample rate asterisk is using, but you may adjust parameters for arecord via command line options to fit with asterisk, too.

Takashi

author
#8 lore raw
Quoted 122 lines · Takashi Iwai

At Thu, 26 Jun 2008 12:59:08 -0400,

Quoted 99 lines · Jerry Geis

Takashi Iwai wrote:

    At Thu, 26 Jun 2008 12:46:24 -0400,
    Jerry Geis wrote:

        Takashi Iwai wrote:
        
            At Thu, 26 Jun 2008 12:03:24 -0400,
            Jerry Geis wrote:
        
                Takashi Iwai wrote:
        
                    At Thu, 26 Jun 2008 10:38:57 -0400,
                    Jerry Geis wrote:
        
                        #0  0xb7e892ff in memcpy () from /lib/tls/libc.so.6
                        #1  0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, 
                        src_area=0x81dc1c0, src_offset=170, samples=0, 
                        format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589
        
                    samples = 0 and...
        
                        #2  0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, 
                        dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, 
                        frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736
        
                    ... here frames = 122.  Something inconsistent around here.
                    snd_pcm_areas_copy() must passe samples=frames when channels=1.
                    Could you check the values via gdb?
        
                    Takashi
        
                Takashi,
                
                I am not sure what your asking me. The output I provided is gdb what else
                can I check? Really anxious to get this USB sound device playing 
                consistantly.
        
            Check whether frames still 122 in frame#1, for example.
        
                Is there a better asound.conf to use?
        
            The strange thing is that the recent config for usb-audio also uses
            dmix/dsnoop.  And you don't get any errors with the system-default
            config?
        
            Takashi
        
        Takashi,
        
        checking frames still 122 in frame #1 is way over my expertise.
        
        With this asound.conf file It plays but choppy audio.

    And doesn't it work if you don't define anything, just using the
    system default?
    
    The bug must be fixed, of course.  But I still don't see why you have
    to redefine the configuration...

    Takashi

        defaults.ctl.card 0
        defaults.pcm.card 0
        
        pcm.card0 {
          type hw
          card 0
        }
        
        pcm.dmixer {
          type dmix
          ipc_key 1025
          slave {
            pcm "hw:0,0"
            period_time 0
            period_size 2048
            buffer_size 32768
            rate 48000
          }
          bindings {
            0 0
            1 1
          }
        }
        pcm.skype {
          type asym
        
          playback.pcm "dmixer"
          capture.pcm "card0"
        }
        
        pcm.!default {
          type plug
          slave.pcm "skype"
        }
        
        Jerry
Quoted 6 lines

No, thats what I am saying, when I remove the /etc/asound.conf file I get seg faults.
When I run with the above file I get choppy audio but at least 15 times it played with no fault.
I presume the system-default file is have no asound.conf file.

OK. Also make sure that you have no ~/.asoundrc file.

Quoted 5 lines

Now also, I am not just doing aplay, which seems to work everytime and audio sounds fine.
I am using the console/dsp from asterisks and playing a wave file through that. Does that help.

The best is to find a simpler test case, such as arecord, because otherwise your problem cannot be reproduced on other environment easily.

Quoted 8 lines

Not sure which format and sample rate asterisk is using, but you may adjust parameters for arecord via command line options to fit with asterisk, too.

Takashi

I am not having any luck using arecord and aplay to simulate my problem.

Do you have any further suggestions?

Jerry

author
#9 lore raw
Quoted 134 lines · Jerry Geis
Quoted 122 lines · Takashi Iwai

At Thu, 26 Jun 2008 12:59:08 -0400,

Quoted 99 lines · Jerry Geis

Takashi Iwai wrote:

    At Thu, 26 Jun 2008 12:46:24 -0400,
    Jerry Geis wrote:

        Takashi Iwai wrote:
        
            At Thu, 26 Jun 2008 12:03:24 -0400,
            Jerry Geis wrote:
        
                Takashi Iwai wrote:
        
                    At Thu, 26 Jun 2008 10:38:57 -0400,
                    Jerry Geis wrote:
        
                        #0  0xb7e892ff in memcpy () from /lib/tls/libc.so.6
                        #1  0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, 
                        src_area=0x81dc1c0, src_offset=170, samples=0, 
                        format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589
        
                    samples = 0 and...
        
                        #2  0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, 
                        dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, 
                        frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736
        
                    ... here frames = 122.  Something inconsistent around here.
                    snd_pcm_areas_copy() must passe samples=frames when channels=1.
                    Could you check the values via gdb?
        
                    Takashi
        
                Takashi,
                
                I am not sure what your asking me. The output I provided is gdb what else
                can I check? Really anxious to get this USB sound device playing 
                consistantly.
        
            Check whether frames still 122 in frame#1, for example.
        
                Is there a better asound.conf to use?
        
            The strange thing is that the recent config for usb-audio also uses
            dmix/dsnoop.  And you don't get any errors with the system-default
            config?
        
            Takashi
        
        Takashi,
        
        checking frames still 122 in frame #1 is way over my expertise.
        
        With this asound.conf file It plays but choppy audio.

    And doesn't it work if you don't define anything, just using the
    system default?
    
    The bug must be fixed, of course.  But I still don't see why you have
    to redefine the configuration...

    Takashi

        defaults.ctl.card 0
        defaults.pcm.card 0
        
        pcm.card0 {
          type hw
          card 0
        }
        
        pcm.dmixer {
          type dmix
          ipc_key 1025
          slave {
            pcm "hw:0,0"
            period_time 0
            period_size 2048
            buffer_size 32768
            rate 48000
          }
          bindings {
            0 0
            1 1
          }
        }
        pcm.skype {
          type asym
        
          playback.pcm "dmixer"
          capture.pcm "card0"
        }
        
        pcm.!default {
          type plug
          slave.pcm "skype"
        }
        
        Jerry
Quoted 6 lines

No, thats what I am saying, when I remove the /etc/asound.conf file I get seg faults.
When I run with the above file I get choppy audio but at least 15 times it played with no fault.
I presume the system-default file is have no asound.conf file.

OK. Also make sure that you have no ~/.asoundrc file.

Quoted 5 lines

Now also, I am not just doing aplay, which seems to work everytime and audio sounds fine.
I am using the console/dsp from asterisks and playing a wave file through that. Does that help.

The best is to find a simpler test case, such as arecord, because otherwise your problem cannot be reproduced on other environment easily.

Quoted 8 lines

Not sure which format and sample rate asterisk is using, but you may adjust parameters for arecord via command line options to fit with asterisk, too.

Takashi

Quoted 5 lines

I am not having any luck using arecord and aplay to simulate my problem.

Do you have any further suggestions?

Jerry

As a thought I switched my asterisk interface from using alsa to oss. The audio is fine now not choppy and no seg faults.

Jerry