seg fault with 1.0.17rc2
#0 0xb7e892ff in memcpy () from /lib/tls/libc.so.6
#1 0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589
#2 0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736
#3 0xb74ee0a1 in snd_pcm_mmap_read_areas (pcm=0x81de3b8, areas=0xb7125b70, offset=0, size=122) at pcm_mmap.c:151
#4 0xb74e350d in snd1_pcm_read_areas (pcm=0x81de3b8, areas=0xb7125b70, offset=0, size=122, func=0xb74edfd0 <snd_pcm_mmap_read_areas>) at pcm.c:6501 #5 0xb74ed2df in snd_pcm_mmap_readi (pcm=0x81de3b8, buffer=0xb6352a04, size=122) at pcm_mmap.c:236
#6 0xb74dbb14 in snd_pcm_readi (pcm=0x81de110, buffer=0xb6352a04, size=61) at pcm_local.h:526
#7 0xb756279b in alsa_read (chan=0x821c928) at chan_alsa.c:683 #8 0x080855b1 in __ast_read (chan=0x821c928, dropaudio=0) at channel.c:2100
I am using a usb-audio device.
Bus 003 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter Bus 002 Device 002: ID 13fe:1f00
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
I am using this as my asound.conf file
pcm.usb-audio {
type hw
card 0
}
ctl.usb-audio {
type hw
card 0
}I am using debian etch 2.6.18-6-486 #1 Fri Jun 6 21:47:01 UTC 2008 i486 GNU/Linux
It works for a couple times then I get the seg fault. I am using the Console output from asterisk.
help? Thanks,
Jerry
At Thu, 26 Jun 2008 10:38:57 -0400,
Quoted 5 lines · Jerry Geis
#0
0xb7e892ffin memcpy () from/lib/tls/libc.so.6
#10xb74e40a9insnd_pcm_area_copy(dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589
samples = 0 and...
Quoted 3 lines
#2
0xb74e438dinsnd_pcm_areas_copy(dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736
... here frames = 122. Something inconsistent around here. snd_pcm_areas_copy() must passe samples=frames when channels=1. Could you check the values via gdb?
Takashi
Quoted 17 lines · Takashi Iwai
At Thu, 26 Jun 2008 10:38:57 -0400,
Quoted 5 lines · Jerry Geis
#0
0xb7e892ffin memcpy () from/lib/tls/libc.so.6
#10xb74e40a9insnd_pcm_area_copy(dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589samples = 0 and...
Quoted 4 lines
#2
0xb74e438dinsnd_pcm_areas_copy(dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736
Quoted 8 lines
... here frames = 122. Something inconsistent around here.
snd_pcm_areas_copy()must passe samples=frames when channels=1. Could you check the values via gdb?Takashi
Takashi,
I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly.
Is there a better asound.conf to use?
How can I help?
Jerry
At Thu, 26 Jun 2008 12:03:24 -0400,
Quoted 26 lines · Jerry Geis
Quoted 22 lines · Takashi Iwai
At Thu, 26 Jun 2008 10:38:57 -0400,
Quoted 5 lines · Jerry Geis
#0
0xb7e892ffin memcpy () from/lib/tls/libc.so.6
#10xb74e40a9insnd_pcm_area_copy(dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589samples = 0 and...
Quoted 4 lines
#2
0xb74e438dinsnd_pcm_areas_copy(dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736... here frames = 122. Something inconsistent around here.
snd_pcm_areas_copy()must passe samples=frames when channels=1. Could you check the values via gdb?
Quoted 8 lines
Quoted 3 lines
Takashi
Takashi,
I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly.
Check whether frames still 122 in frame#1, for example.
Quoted 1 line
Is there a better asound.conf to use?
The strange thing is that the recent config for usb-audio also uses dmix/dsnoop. And you don't get any errors with the system-default config?
Takashi
Quoted 47 lines · Takashi Iwai
At Thu, 26 Jun 2008 12:03:24 -0400,
Quoted 31 lines · Jerry Geis
Quoted 19 lines · Takashi Iwai
At Thu, 26 Jun 2008 10:38:57 -0400,
Quoted 6 lines · Jerry Geis
#0
0xb7e892ffin memcpy () from/lib/tls/libc.so.6
#10xb74e40a9insnd_pcm_area_copy(dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589samples = 0 and...
Quoted 5 lines
#2
0xb74e438dinsnd_pcm_areas_copy(dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736Quoted 9 lines
... here frames = 122. Something inconsistent around here.
snd_pcm_areas_copy()must passe samples=frames when channels=1. Could you check the values via gdb?Takashi
Quoted 6 lines
Takashi,
I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly.
Check whether frames still 122 in frame#1, for example.
Quoted 2 lines
Is there a better asound.conf to use?
Quoted 8 lines
The strange thing is that the recent config for usb-audio also uses dmix/dsnoop. And you don't get any errors with the system-default config?
Takashi
Takashi,
checking frames still 122 in frame #1 is way over my expertise.
With this asound.conf file It plays but choppy audio.
defaults.ctl.card 0
defaults.pcm.card 0
pcm.card0 {
type hw
card 0
}
pcm.dmixer {
type dmix
ipc_key 1025
slave {
pcm "hw:0,0"
period_time 0
period_size 2048
buffer_size 32768
rate 48000
}
bindings {
0 0
1 1 }
}
pcm.skype {
type asym
playback.pcm "dmixer"
capture.pcm "card0"
}
pcm.!default {
type plug
slave.pcm "skype"
}
Jerry
At Thu, 26 Jun 2008 12:46:24 -0400,
Quoted 42 lines · Jerry Geis
Takashi Iwai wrote:
At Thu, 26 Jun 2008 12:03:24 -0400,
Jerry Geis wrote:Takashi Iwai wrote:
At Thu, 26 Jun 2008 10:38:57 -0400,
Jerry Geis wrote:#0
0xb7e892ffin memcpy () from/lib/tls/libc.so.6
#10xb74e40a9insnd_pcm_area_copy(dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589samples = 0 and...
#2
0xb74e438dinsnd_pcm_areas_copy(dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736... here frames = 122. Something inconsistent around here.
snd_pcm_areas_copy()must passe samples=frames when channels=1. Could you check the values via gdb?Takashi
Takashi,
I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly.
Check whether frames still 122 in frame#1, for example.
Is there a better asound.conf to use?
The strange thing is that the recent config for usb-audio also uses dmix/dsnoop. And you don't get any errors with the system-default config?
Quoted 7 lines
Takashi
Takashi,
checking frames still 122 in frame #1 is way over my expertise.
With this asound.conf file It plays but choppy audio.
And doesn't it work if you don't define anything, just using the system default?
The bug must be fixed, of course. But I still don't see why you have to redefine the configuration...
Takashi
Quoted 39 lines
defaults.ctl.card 0
defaults.pcm.card 0pcm.card0 {
type hw
card 0
}pcm.dmixer {
type dmix
ipc_key1025slave { pcm "hw:0,0" period_time 0 period_size 2048 buffer_size 32768 rate 48000 } bindings { 0 0 1 1}
}
pcm.skype {
type asymplayback.pcm "dmixer"
capture.pcm "card0"
}pcm.!default {
type plug
slave.pcm "skype"
}Jerry
Quoted 53 lines · Takashi Iwai
At Thu, 26 Jun 2008 12:46:24 -0400,
Quoted 41 lines · Jerry Geis
Takashi Iwai wrote:
At Thu, 26 Jun 2008 12:03:24 -0400,
Jerry Geis wrote:Takashi Iwai wrote:
At Thu, 26 Jun 2008 10:38:57 -0400,
Jerry Geis wrote:#0
0xb7e892ffin memcpy () from/lib/tls/libc.so.6
#10xb74e40a9insnd_pcm_area_copy(dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589samples = 0 and...
#2
0xb74e438dinsnd_pcm_areas_copy(dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736... here frames = 122. Something inconsistent around here.
snd_pcm_areas_copy()must passe samples=frames when channels=1. Could you check the values via gdb?Takashi
Takashi,
I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly.
Check whether frames still 122 in frame#1, for example.
Is there a better asound.conf to use?
The strange thing is that the recent config for usb-audio also uses dmix/dsnoop. And you don't get any errors with the system-default config?
Quoted 8 lines
Takashi
Takashi,
checking frames still 122 in frame #1 is way over my expertise.
With this asound.conf file It plays but choppy audio.
Quoted 52 lines
And doesn't it work if you don't define anything, just using the system default?
The bug must be fixed, of course. But I still don't see why you have to redefine the configuration...
Takashi
Quoted 39 lines
defaults.ctl.card 0
defaults.pcm.card 0pcm.card0 {
type hw
card 0
}pcm.dmixer {
type dmix
ipc_key1025slave { pcm "hw:0,0" period_time 0 period_size 2048 buffer_size 32768 rate 48000 } bindings { 0 0 1 1}
}
pcm.skype {
type asymplayback.pcm "dmixer"
capture.pcm "card0"
}pcm.!default {
type plug
slave.pcm "skype"
}Jerry
No, thats what I am saying, when I remove the /etc/asound.conf file I get seg faults.
When I run with the above file I get choppy audio but at least 15 times it played with no fault.
I presume the system-default file is have no asound.conf file.
Now also, I am not just doing aplay, which seems to work everytime and audio sounds fine.
I am using the console/dsp from asterisks and playing a wave file through that. Does that help.
How can I help?
Jerry
At Thu, 26 Jun 2008 12:59:08 -0400,
Quoted 100 lines · Jerry Geis
Takashi Iwai wrote:
At Thu, 26 Jun 2008 12:46:24 -0400, Jerry Geis wrote: Takashi Iwai wrote: At Thu, 26 Jun 2008 12:03:24 -0400, Jerry Geis wrote: Takashi Iwai wrote: At Thu, 26 Jun 2008 10:38:57 -0400, Jerry Geis wrote: #0 0xb7e892ff in memcpy () from /lib/tls/libc.so.6 #1 0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589 samples = 0 and... #2 0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736 ... here frames = 122. Something inconsistent around here. snd_pcm_areas_copy() must passe samples=frames when channels=1. Could you check the values via gdb? Takashi Takashi, I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly. Check whether frames still 122 in frame#1, for example. Is there a better asound.conf to use? The strange thing is that the recent config for usb-audio also uses dmix/dsnoop. And you don't get any errors with the system-default config? Takashi Takashi, checking frames still 122 in frame #1 is way over my expertise. With this asound.conf file It plays but choppy audio. And doesn't it work if you don't define anything, just using the system default? The bug must be fixed, of course. But I still don't see why you have to redefine the configuration... Takashi defaults.ctl.card 0 defaults.pcm.card 0 pcm.card0 { type hw card 0 } pcm.dmixer { type dmix ipc_key 1025 slave { pcm "hw:0,0" period_time 0 period_size 2048 buffer_size 32768 rate 48000 } bindings { 0 0 1 1 } } pcm.skype { type asym playback.pcm "dmixer" capture.pcm "card0" } pcm.!default { type plug slave.pcm "skype" } Jerry
Quoted 5 lines
No, thats what I am saying, when I remove the
/etc/asound.conffile I get seg faults.
When I run with the above file I get choppy audio but at least 15 times it played with no fault.
I presume the system-default file is have no asound.conf file.
OK. Also make sure that you have no ~/.asoundrc file.
Quoted 4 lines
Now also, I am not just doing aplay, which seems to work everytime and audio sounds fine.
I am using the console/dsp from asterisks and playing a wave file through that. Does that help.
The best is to find a simpler test case, such as arecord, because otherwise your problem cannot be reproduced on other environment easily.
Not sure which format and sample rate asterisk is using, but you may adjust parameters for arecord via command line options to fit with asterisk, too.
Takashi
Quoted 122 lines · Takashi Iwai
At Thu, 26 Jun 2008 12:59:08 -0400,
Quoted 99 lines · Jerry Geis
Takashi Iwai wrote:
At Thu, 26 Jun 2008 12:46:24 -0400, Jerry Geis wrote: Takashi Iwai wrote: At Thu, 26 Jun 2008 12:03:24 -0400, Jerry Geis wrote: Takashi Iwai wrote: At Thu, 26 Jun 2008 10:38:57 -0400, Jerry Geis wrote: #0 0xb7e892ff in memcpy () from /lib/tls/libc.so.6 #1 0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589 samples = 0 and... #2 0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736 ... here frames = 122. Something inconsistent around here. snd_pcm_areas_copy() must passe samples=frames when channels=1. Could you check the values via gdb? Takashi Takashi, I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly. Check whether frames still 122 in frame#1, for example. Is there a better asound.conf to use? The strange thing is that the recent config for usb-audio also uses dmix/dsnoop. And you don't get any errors with the system-default config? Takashi Takashi, checking frames still 122 in frame #1 is way over my expertise. With this asound.conf file It plays but choppy audio. And doesn't it work if you don't define anything, just using the system default? The bug must be fixed, of course. But I still don't see why you have to redefine the configuration... Takashi defaults.ctl.card 0 defaults.pcm.card 0 pcm.card0 { type hw card 0 } pcm.dmixer { type dmix ipc_key 1025 slave { pcm "hw:0,0" period_time 0 period_size 2048 buffer_size 32768 rate 48000 } bindings { 0 0 1 1 } } pcm.skype { type asym playback.pcm "dmixer" capture.pcm "card0" } pcm.!default { type plug slave.pcm "skype" } JerryQuoted 6 lines
No, thats what I am saying, when I remove the
/etc/asound.conffile I get seg faults.
When I run with the above file I get choppy audio but at least 15 times it played with no fault.
I presume the system-default file is have no asound.conf file.OK. Also make sure that you have no ~/.asoundrc file.
Quoted 5 lines
Now also, I am not just doing aplay, which seems to work everytime and audio sounds fine.
I am using the console/dsp from asterisks and playing a wave file through that. Does that help.The best is to find a simpler test case, such as arecord, because otherwise your problem cannot be reproduced on other environment easily.
Quoted 8 lines
Not sure which format and sample rate asterisk is using, but you may adjust parameters for arecord via command line options to fit with asterisk, too.
Takashi
I am not having any luck using arecord and aplay to simulate my problem.
Do you have any further suggestions?
Jerry
Quoted 134 lines · Jerry Geis
Quoted 122 lines · Takashi Iwai
At Thu, 26 Jun 2008 12:59:08 -0400,
Quoted 99 lines · Jerry Geis
Takashi Iwai wrote:
At Thu, 26 Jun 2008 12:46:24 -0400, Jerry Geis wrote: Takashi Iwai wrote: At Thu, 26 Jun 2008 12:03:24 -0400, Jerry Geis wrote: Takashi Iwai wrote: At Thu, 26 Jun 2008 10:38:57 -0400, Jerry Geis wrote: #0 0xb7e892ff in memcpy () from /lib/tls/libc.so.6 #1 0xb74e40a9 in snd_pcm_area_copy (dst_area=0xb7125b70, dst_offset=0, src_area=0x81dc1c0, src_offset=170, samples=0, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2589 samples = 0 and... #2 0xb74e438d in snd_pcm_areas_copy (dst_areas=0xb7125b7c, dst_offset=0, src_areas=0x81dc1cc, src_offset=170, channels=1, frames=122, format=SND_PCM_FORMAT_S16_LE) at pcm.c:2736 ... here frames = 122. Something inconsistent around here. snd_pcm_areas_copy() must passe samples=frames when channels=1. Could you check the values via gdb? Takashi Takashi, I am not sure what your asking me. The output I provided is gdb what else can I check? Really anxious to get this USB sound device playing consistantly. Check whether frames still 122 in frame#1, for example. Is there a better asound.conf to use? The strange thing is that the recent config for usb-audio also uses dmix/dsnoop. And you don't get any errors with the system-default config? Takashi Takashi, checking frames still 122 in frame #1 is way over my expertise. With this asound.conf file It plays but choppy audio. And doesn't it work if you don't define anything, just using the system default? The bug must be fixed, of course. But I still don't see why you have to redefine the configuration... Takashi defaults.ctl.card 0 defaults.pcm.card 0 pcm.card0 { type hw card 0 } pcm.dmixer { type dmix ipc_key 1025 slave { pcm "hw:0,0" period_time 0 period_size 2048 buffer_size 32768 rate 48000 } bindings { 0 0 1 1 } } pcm.skype { type asym playback.pcm "dmixer" capture.pcm "card0" } pcm.!default { type plug slave.pcm "skype" } JerryQuoted 6 lines
No, thats what I am saying, when I remove the
/etc/asound.conffile I get seg faults.
When I run with the above file I get choppy audio but at least 15 times it played with no fault.
I presume the system-default file is have no asound.conf file.OK. Also make sure that you have no ~/.asoundrc file.
Quoted 5 lines
Now also, I am not just doing aplay, which seems to work everytime and audio sounds fine.
I am using the console/dsp from asterisks and playing a wave file through that. Does that help.The best is to find a simpler test case, such as arecord, because otherwise your problem cannot be reproduced on other environment easily.
Quoted 8 lines
Not sure which format and sample rate asterisk is using, but you may adjust parameters for arecord via command line options to fit with asterisk, too.
Takashi
Quoted 5 lines
I am not having any luck using arecord and aplay to simulate my problem.
Do you have any further suggestions?
Jerry
As a thought I switched my asterisk interface from using alsa to oss. The audio is fine now not choppy and no seg faults.
Jerry