OMAP3 Beagle: Enable nand and jffs2 support in defconfig

From: Steve Sakoman <[email protected]>, Dirk Behme <[email protected]

Quoted 1 line

Enable nand and jffs2 in defconfig

Signed-off-by Steve Sakoman <[email protected]>

Signed-off-by Dirk Behme <[email protected]>

Index: linux-beagle/arch/arm/configs/omap3_beagle_defconfig
===================================================================

arch/arm/configs/omap3_beagle_defconfig +2 -2

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3-omap1
-# Tue May 27 22:23:14 2008
+# Linux kernel version: 2.6.26-rc8-omap1
+# Fri Jul  4 10:19:23 2008
 #

CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y

arch/arm/configs/omap3_beagle_defconfig +1 -1

@@ -170,9 +170,9 @@ CONFIG_ARCH_OMAP3=y
 #
 # OMAP Feature Selections
 #
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
 # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_SMARTREFLEX is not set
 # CONFIG_OMAP_RESET_CLOCKS is not set

CONFIG_OMAP_BOOT_TAG=y
CONFIG_OMAP_BOOT_REASON=y

arch/arm/configs/omap3_beagle_defconfig +77 -1

@@ -415,7 +415,83 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set

CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set

arch/arm/configs/omap3_beagle_defconfig +2 -0

@@ -791,6 +867,7 @@ CONFIG_USB_MUSB_LOGLEVEL=0
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'

@@ -837,6 +914,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set

CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set

arch/arm/configs/omap3_beagle_defconfig +0 -0

@@ -873,6 +951,7 @@ CONFIG_MMC=y

CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set

#
# MMC/SD Host Controller Drivers

arch/arm/configs/omap3_beagle_defconfig +0 -0

@@ -909,6 +988,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set

CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set

#
# SPI RTC drivers

arch/arm/configs/omap3_beagle_defconfig +11 -0

@@ -1001,6 +1081,17 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set

@@ -1235,6 +1326,8 @@ CONFIG_CRC_CCITT=y

CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y

arch/arm/configs/omap3_beagle_defconfig +2 -0

+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y