OMAP3 Beagle: Enable nand support
Get series with b4
b4 am [email protected]Versions newest first
- v2 Latest3 patches 4 repliesIn review
Changes in v2 from the cover letter
- Apply cleanly to recent git (defconfig, drivers/mtd/nand/omap2.c)
- Beagle has only NAND. This results in small config. Move configuration to board-omap3beagle.c and don't create a new file board-omap3beagle-flash.c for it.
Patches in v2 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | mtd omap2 nand driver: extend to work with omap3 boardsdrivers/ drivers/ | +146 | 1 reply | |
| 2/3 | OMAP3 Beagle: add nand supportarch/ | +101 | 1 reply | |
| 3/3 | OMAP3 Beagle: Enable nand and jffs2 support in defconfigarch/ | +97 | 1 reply |
Reviews trailers per patch
2 of 3 patches have a Reviewed-by or Acked-by.
| Patch | Koen Kooi |
|---|---|
| 1/3 | |
| 2/3 | A-b |
| 3/3 | A-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/3 v2] OMAP3 Beagle: Enable nand support
This series of patches adds NAND support to the BeagleBoard.
The first patch in the series builds on work by Teerth Reddy <[email protected]> and Steve Sakoman <[email protected]> to extend the omap2 nand driver to work with both omap2 and omap3 architectures (as well as adding/clarifying comments).
The second patch adds the beagle nand support, and the final patch enables the nand driver and jffs2 support in the beagle defconfig.
The patch set was reviewed by Khasim Syed Mohammed <[email protected]> prior to this submission. It was tested on Rev A and B BeagleBoards.
This v2 replaces http://marc.info/?l=linux-omap&m=121230229625544&w=2
Changes in v2:
- Apply cleanly to recent git (defconfig, drivers/mtd/nand/omap2.c)
- Beagle has only NAND. This results in small config. Move configuration to board-omap3beagle.c and don't create a new file board-omap3beagle-flash.c for it.