Skip to contentSkip to conversation

PROBLEM: Kernel 2.6.26 oops if I unplug my Logitech USB 1.1 headset

DISCUSSION Edgar Kalkowski 4 participants 8 messages Sep 4, 2008 – Sep 10, 2008

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Dear kernel hackers. ;)

[1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.

[2.] Full description of the problem/report:
If I unplug the Logitech Headset, the kernel prints the following message to /var/log/dmesg.log. I can unload the ehci module by executing "sudo rmmod ehci_hcd" but "sudo rmmod uhci_hcd" blocks infinitely and thus I suppose the Headset uses USB 1.1. "lsusb" shows the headset as

Bus 002 Device 004: ID 046d:0a01 Logitech, Inc. USB Headset

and I have no further information about the brand name or something. If I replug the headset or any other usb device it is no longer recognized by the system. I'm using a current arch linux install with KDE 4.1.1 on my Samsung R50 laptop. The above data (except the oops message) was collected after a reboot with a plugged in again and working headset.

The oops does not occur every time I unplug the headset but so far I have not been able to determine how to trigger the oops. I have tried to plug and unplug it a few times after a fresh reboot with no programs running but KDE and after four or five plugs and unplugs the kernel oopsed.

I hope this bug report helps you guys a little and this bug get's fixed at some time as it's quite annoying. ;)

[3.] Keywords (i.e., modules, networking, kernel): usb, usbcore, uhci_hcd, kernel, module, oops, crash

[4.] Kernel version (from /proc/version): Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.1 20080724 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008

[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)

usb 3-1: USB disconnect, address 2

BUG: unable to handle kernel paging request at 00100100
IP: [<f895f89d>] :snd:snd_ctl_dev_disconnect+0x5d/0x90
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: udf crc_itu_t michael_mic arc4 ecb ieee80211_crypt_tkip ipv6

radeon drm ntfs sdhci mmc_core pcspkr yenta_socket rsrc_nonstatic serio_raw psmouse ohci1394 ieee1394 i2c_i801 i2c_core snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep usb_storage video output intel_agp agpgart sg thermal fan button battery ac cpufreq_ondemand acpi_cpufreq freq_table processor snd_intel8x0m joydev snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device evdev usblp snd_intel8x0 usbhid hid ff_memless snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ipw2200 ieee80211 ieee80211_crypt b44 ssb pcmcia pcmcia_core firmware_class mii rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sr_mod sd_mod cdrom uhci_hcd ehci_hcd usbcore ata_piix ata_generic pata_acpi libata scsi_mod dock

Pid: 764, comm: khubd Not tainted (2.6.26-ARCH #1)
EIP: 0060:[<f895f89d>] EFLAGS: 00010282 CPU: 0
EIP is at snd_ctl_dev_disconnect+0x5d/0x90 [snd]
EAX: 00000000 EBX: 00100100 ECX: 00020004 EDX: 0000001d
ESI: f70f0b70 EDI: f70f0a00 EBP: f70f0b4c ESP: f7063e30
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process khubd (pid: 764, ti=f7062000 task=f7bf87e0 task.ti=f7062000)

Stack: 00000000 f7b6a020 00000000 f70f0a00 f70f0b40 f8961e96 22222222 f7b6a020
       f8961eea 00000000 f70f0a00 f70f0b8c 00000000 f895e1b8 22222222 f7b5de00
       f7b5de00 f8b148c0 f7b952c0 f8b03c48 f70f0a00 f7b5de00 f8b148c0 f7b5de1c
Call Trace:
 [<f8961e96>] snd_device_disconnect+0x66/0x90 [snd]
 [<f8961eea>] snd_device_disconnect_all+0x2a/0x50 [snd]
 [<f895e1b8>] snd_card_disconnect+0x148/0x1a0 [snd]
 [<f8b03c48>] usb_audio_disconnect+0x58/0x140 [snd_usb_audio]
 [<f88c1470>] usb_unbind_interface+0x50/0xa0 [usbcore]
 [<c026a5b5>] __device_release_driver+0x75/0xc0
 [<c026a6c0>] device_release_driver+0x20/0x40
 [<c0269c2a>] bus_remove_device+0x8a/0xc0
 [<c026868f>] device_del+0xef/0x150
 [<f88be644>] usb_disable_device+0x84/0xf0 [usbcore]
 [<f88ba180>] usb_disconnect+0xa0/0x140 [usbcore]
 [<f88bad03>] hub_thread+0x313/0x1170 [usbcore]
 [<c013f430>] autoremove_wake_function+0x0/0x50
 [<f88ba9f0>] hub_thread+0x0/0x1170 [usbcore]
 [<c013f149>] kthread+0x39/0x70
 [<c013f110>] kthread+0x0/0x70
 [<c0104c23>] kernel_thread_helper+0x7/0x14
 =======================
Code: 18 b9 01 00 00 00 ba 03 00 00 00 c7 04 24 00 00 00 00 e8 c7 30 7c c7 8d 43

28 b9 04 0002 00 ba 1d 00 00 00 e8 a5 44 83 c7 8b 1b <8b> 03 0f 18 00 90 39 f3 75 c9 89 e8 e8 d2 3c 7e c7 89 fa 31 c0
EIP: [<f895f89d>] snd_ctl_dev_disconnect+0x5d/0x90 [snd] SS:ESP 0068:f7063e30
- ---[ end trace 05aa0b5534340422 ]---

[6.] A small shell script or example program which triggers the
problem (if possible)

[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)

If some fields are empty or look unusual you may have an old version.

Compare to the current minimal requirements in Documentation/Changes.

Linux HEX 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686 Intel(R) Pentium(R) M processor 1.73GHz GenuineIntel GNU/Linux

Gnu C 4.3.1

Gnu make 3.81

binutils 2.18.0.20080610

util-linux 2.14

mount support

module-init-tools 3.4

e2fsprogs 1.40.8

jfsutils 1.1.12

reiserfsprogs 3.6.20

xfsprogs 2.9.8

pcmciautils 014

PPP 2.4.4

Linux C Library 2.8

Dynamic linker (ldd) 2.8

Linux C++ Library so.6.0

Procps 3.2.7

Net-tools 1.60

Kbd 1.13

Sh-utils 6.12

udev 119

wireless-tools 29

Modules Loaded michael_mic arc4 ecb ieee80211_crypt_tkip
cpufreq_ondemand snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep ipv6 radeon drm ntfs joydev pcspkr serio_raw psmouse i2c_i801 i2c_core usblp sdhci ohci1394 mmc_core ieee1394 yenta_socket rsrc_nonstatic usb_storage usbhid hid ff_memless video output intel_agp agpgart sg thermal evdev fan button battery ac acpi_cpufreq freq_table processor snd_intel8x0m snd_intel8x0 snd_ac97_codec snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ipw2200 ieee80211 ieee80211_crypt b44 ssb pcmcia pcmcia_core firmware_class mii rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sr_mod cdrom sd_mod ehci_hcd uhci_hcd usbcore ata_piix ata_generic pata_acpi libata scsi_mod dock

[7.2.] Processor information (from /proc/cpuinfo):

processor : 0

vendor_id : GenuineIntel

cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.73GHz
stepping : 8
cpu MHz : 1733.000
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2
bogomips : 3462.30
clflush size : 64
power management:

[7.3.] Module information (from /proc/modules):

michael_mic 4224 4 - Live 0xf8c4d000
arc4 3712 4 - Live 0xf8849000
ecb 4608 4 - Live 0xf8b65000
ieee80211_crypt_tkip 10752 2 - Live 0xf8c49000 cpufreq_ondemand 8716 1 - Live 0xf8c3c000
snd_usb_audio 81152 1 - Live 0xf94a0000
snd_usb_lib 17024 1 snd_usb_audio, Live 0xf8c50000 snd_rawmidi 21504 1 snd_usb_lib, Live 0xf8b16000
snd_hwdep 8964 1 snd_usb_audio, Live 0xf8b39000
ipv6 259684 63 - Live 0xf94d2000
radeon 137248 2 - Live 0xf8c60000
drm 73896 3 radeon, Live 0xf8b51000
ntfs 221664 1 - Live 0xf8b6a000
joydev 11584 0 - Live 0xf8b04000
pcspkr 4352 0 - Live 0xf8b01000
serio_raw 7044 0 - Live 0xf8acc000
psmouse 38288 0 - Live 0xf8b1d000
i2c_i801 10384 0 - Live 0xf8a93000
i2c_core 21140 1 i2c_i801, Live 0xf8b09000
usblp 13824 0 - Live 0xf8af0000
sdhci 16388 0 - Live 0xf8a8d000
ohci1394 30128 0 - Live 0xf8ae7000
mmc_core 43036 1 sdhci, Live 0xf8af5000
ieee1394 80696 1 ohci1394, Live 0xf8ab7000
yenta_socket 24972 1 - Live 0xf8aaf000
rsrc_nonstatic 12800 1 yenta_socket, Live 0xf8a88000 usb_storage 90560 1 - Live 0xf8acf000
usbhid 46016 0 - Live 0xf8aa2000
hid 40960 1 usbhid, Live 0xf8a97000
ff_memless 6664 1 usbhid, Live 0xf8a2b000
video 18064 0 - Live 0xf8a82000
output 4608 1 video, Live 0xf8a51000
intel_agp 26428 0 - Live 0xf8a67000
agpgart 29652 2 drm,intel_agp, Live 0xf8a79000
sg 28596 0 - Live 0xf8a71000
thermal 16796 0 - Live 0xf8a61000
evdev 10880 10 - Live 0xf8a56000
fan 6020 0 - Live 0xf8a2e000
button 7824 0 - Live 0xf8a1c000
battery 12036 0 - Live 0xf8a4d000
ac 6020 0 - Live 0xf8a22000
acpi_cpufreq 9228 0 - Live 0xf8a27000
freq_table 5568 2 cpufreq_ondemand,acpi_cpufreq, Live 0xf8a1f000 processor 33836 3 thermal,acpi_cpufreq, Live 0xf89a6000 snd_intel8x0m 15500 0 - Live 0xf89cf000
snd_intel8x0 30748 1 - Live 0xf8a13000
snd_ac97_codec 99748 2 snd_intel8x0m,snd_intel8x0, Live 0xf8a33000 snd_seq_oss 31872 0 - Live 0xf89b1000
snd_seq_midi_event 8192 1 snd_seq_oss, Live 0xf897d000 snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event, Live 0xf8a05000 snd_seq_device 8332 3 snd_rawmidi,snd_seq_oss,snd_seq, Live 0xf8979000 snd_pcm_oss 40192 0 - Live 0xf895b000
snd_pcm 69636 5 snd_usb_audio,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss, Live 0xf89bc000

snd_timer 21384 2 snd_seq,snd_pcm, Live 0xf8947000

snd_page_alloc 9608 3 snd_intel8x0m,snd_intel8x0,snd_pcm, Live 0xf8957000

snd_mixer_oss 16512 1 snd_pcm_oss, Live 0xf8916000

snd 50724 17 snd_usb_audio,snd_rawmidi,snd_hwdep,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss, Live 0xf8967000
soundcore 8032 1 snd, Live 0xf8944000

ac97_bus 3584 1 snd_ac97_codec, Live 0xf8822000

ipw2200 142408 0 - Live 0xf8982000

ieee80211 31176 1 ipw2200, Live 0xf894e000

ieee80211_crypt 6532 2 ieee80211_crypt_tkip,ieee80211, Live 0xf88e4000

b44 26512 0 - Live 0xf893c000

ssb 39684 1 b44, Live 0xf88f6000

pcmcia 34476 1 ssb, Live 0xf890c000

pcmcia_core 34708 4 yenta_socket,rsrc_nonstatic,ssb,pcmcia, Live 0xf8902000

firmware_class 9088 2 ipw2200,pcmcia, Live 0xf88dc000

mii 6528 1 b44, Live 0xf88d9000
rtc_cmos 11424 0 - Live 0xf888c000
rtc_core 17436 1 rtc_cmos, Live 0xf887c000
rtc_lib 4480 1 rtc_core, Live 0xf8846000
ext3 125704 3 - Live 0xf891c000
jbd 45716 1 ext3, Live 0xf88e9000
mbcache 8708 1 ext3, Live 0xf8842000
sr_mod 16836 0 - Live 0xf8876000
cdrom 36128 1 sr_mod, Live 0xf8882000
sd_mod 25240 7 - Live 0xf886e000
ehci_hcd 35596 0 - Live 0xf8864000
uhci_hcd 23952 0 - Live 0xf8831000
usbcore 132080 8 snd_usb_audio,snd_usb_lib,usblp,usb_storage,usbhid,ehci_hcd,uhci_hcd, Live 0xf88b7000
ata_piix 17924 4 - Live 0xf8839000
ata_generic 6788 0 - Live 0xf882e000
pata_acpi 6016 0 - Live 0xf882b000
libata 150048 3 ata_piix,ata_generic,pata_acpi, Live 0xf8891000 scsi_mod 95692 5 usb_storage,sg,sr_mod,sd_mod,libata, Live 0xf884b000 dock 9488 1 libata, Live 0xf8827000

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)

$ cat /proc/ioports

0000-001f : dma1

0020-0021 : pic1

0040-0043 : timer0

0050-0053 : timer1

0060-0060 : keyboard

0064-0064 : keyboard

0070-0077 : rtc0

0080-008f : dma page reg

00a0-00a1 : pic2

00c0-00df : dma2

00f0-00ff : fpu

0170-0177 : 0000:00:1f.1

0170-0177 : ata_piix

01f0-01f7 : 0000:00:1f.1

01f0-01f7 : ata_piix

0376-0376 : 0000:00:1f.1

0376-0376 : ata_piix

03c0-03df : vga+

03f6-03f6 : 0000:00:1f.1

03f6-03f6 : ata_piix

0680-06ff : pnp 00:06

0800-080f : pnp 00:06

0900-090f : pnp 00:06

0cf8-0cff : PCI conf1

1000-107f : 0000:00:1f.0

1000-107f : pnp 00:06

    1000-1003 : ACPI PM1a_EVT_BLK

    1004-1005 : ACPI PM1a_CNT_BLK

    1008-100b : ACPI PM_TMR

    1010-1015 : ACPI CPU throttle

    1020-1020 : ACPI PM2_CNT_BLK

    1028-102f : ACPI GPE0_BLK

1180-11bf : 0000:00:1f.0

1180-11bf : pnp 00:06

1640-164f : pnp 00:06

1800-181f : 0000:00:1d.0

1800-181f : uhci_hcd

1820-183f : 0000:00:1d.1

1820-183f : uhci_hcd

1840-185f : 0000:00:1d.2

1840-185f : uhci_hcd

1860-187f : 0000:00:1d.3
1860-187f : uhci_hcd
1880-18bf : 0000:00:1e.2
1880-18bf : Intel ICH6
18c0-18cf : 0000:00:1f.1
18c0-18cf : ata_piix
18e0-18ff : 0000:00:1f.3
18e0-18ff : i801_smbus
1c00-1cff : 0000:00:1e.2
1c00-1cff : Intel ICH6
2000-207f : 0000:00:1e.3
2000-207f : Intel ICH6 Modem
2400-24ff : 0000:00:1e.3
2400-24ff : Intel ICH6 Modem
3000-3fff : PCI Bus 0000:01
3000-30ff : 0000:01:00.0
4000-4fff : PCI Bus 0000:02
5000-5fff : PCI Bus 0000:06
5000-50ff : PCI CardBus 0000:07
5400-54ff : PCI CardBus 0000:07

$ cat /proc/iomem

00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ce1ff : Video ROM
000d0000-000d3fff : Adapter ROM
000d4000-000d4fff : Adapter ROM
000f0000-000fffff : System ROM
00100000-3fe9ffff : System RAM
00100000-0031211d : Kernel code
0031211e-003cc37f : Kernel data
00415000-004e527f : Kernel bss
3fea0000-3feb0fff : ACPI Tables
3feb1000-3fefffff : ACPI Non-volatile Storage
3ff00000-3fffffff : reserved
50000000-53ffffff : PCI CardBus 0000:07
54000000-543fffff : PCI CardBus 0000:07
c0000000-c00003ff : 0000:00:1d.7
c0000000-c00003ff : ehci_hcd
c0000400-c00004ff : 0000:00:1e.2
c0000400-c00004ff : Intel ICH6
c0000800-c00009ff : 0000:00:1e.2
c0000800-c00009ff : Intel ICH6
c0100000-c01fffff : PCI Bus 0000:01
c0100000-c010ffff : 0000:01:00.0
c0120000-c013ffff : 0000:01:00.0
c4000000-c7ffffff : PCI Bus 0000:02
c8000000-c80fffff : PCI Bus 0000:06
c8000000-c8000fff : 0000:06:07.0

    c8000000-c8000fff : ipw2200
  c8001000-c80017ff : 0000:06:09.1
    c8001000-c80017ff : ohci1394
  c8001800-c80018ff : 0000:06:09.2
    c8001800-c80018ff : mmc0
  c8001c00-c8001cff : 0000:06:09.3
  c8002000-c80020ff : 0000:06:09.4
  c8003000-c8003fff : 0000:06:09.0
    c8003000-c8003fff : yenta_socket
  c8004000-c8005fff : 0000:06:05.0
    c8004000-c8005fff : 0000:06:05.0

d0000000-d7ffffff : PCI Bus 0000:01
d0000000-d7ffffff : 0000:01:00.0
d8000000-dbffffff : PCI Bus 0000:02
e0000000-f0005fff : reserved
e0000000-efffffff : PCI MMCONFIG 0
f0008000-f000bfff : reserved
fed00000-fed003ff : HPET 0
fed00000-fed003ff : reserved
fed20000-fed8ffff : reserved
ff000000-ffffffff : reserved

[7.5.] PCI information ('lspci -vvv' as root)

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-

Latency: 0

Capabilities: [e0] Vendor Specific Information <?>

Kernel modules: intel-agp

00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 32 bytes

Bus: primary=00, secondary=01, subordinate=01, sec-latency=0

I/O behind bridge: 00003000-00003fff

Memory behind bridge: c0100000-c01fffff

Prefetchable memory behind bridge: d0000000-d7ffffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [88] Subsystem: Samsung Electronics Co Ltd Device b035

Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000

Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1
<1us
ExtTag- RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0 <256ns, L1 <4us

ClockPM- Suprise- LLActRep- BwNot-

LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-

SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [100] Virtual Channel <?>

Capabilities: [140] Root Complex Link <?>

Kernel driver in use: pcieport-driver

Kernel modules: shpchp

00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

        Latency: 0, Cache Line Size: 32 bytes

        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0

        I/O behind bridge: 00004000-00004fff

        Memory behind bridge: c4000000-c7ffffff

        Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff

        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited

ExtTag+ RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <1us, L1 <4us

ClockPM- Suprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surpise+
Slot # 2, PowerLimit 6.500000; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000

Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device b035

Capabilities: [a0] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [100] Virtual Channel <?>

Capabilities: [180] Root Complex Link <?>

Kernel driver in use: pcieport-driver

Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 23

Region 4: I/O ports at 1800 [size=32]

Kernel driver in use: uhci_hcd

Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin B routed to IRQ 19

Region 4: I/O ports at 1820 [size=32]

Kernel driver in use: uhci_hcd

Kernel modules: uhci-hcd

00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin C routed to IRQ 18

Region 4: I/O ports at 1840 [size=32]

Kernel driver in use: uhci_hcd

Kernel modules: uhci-hcd

00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin D routed to IRQ 16

Region 4: I/O ports at 1860 [size=32]

Kernel driver in use: uhci_hcd

Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 23

Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] Debug port: BAR=1 offset=00a0

Kernel driver in use: ehci_hcd

Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

        Latency: 0

        Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32

        I/O behind bridge: 00005000-00005fff

        Memory behind bridge: c8000000-c80fffff

        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [50] Subsystem: Gammagraphx, Inc. Device 0000

00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

        Latency: 0

        Interrupt: pin A routed to IRQ 17

        Region 0: I/O ports at 1c00 [size=256]

        Region 1: I/O ports at 1880 [size=64]

        Region 2: Memory at c0000800 (32-bit, non-prefetchable) [size=512]

        Region 3: Memory at c0000400 (32-bit, non-prefetchable) [size=256]

        Capabilities: [50] Power Management version 2

                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA

PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Kernel driver in use: Intel ICH

Kernel modules: snd-intel8x0

00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])

Subsystem: Samsung Electronics Co Ltd Device 2115

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin B routed to IRQ 20

Region 0: I/O ports at 2400 [size=256]

Region 1: I/O ports at 2000 [size=128]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Kernel driver in use: Intel ICH Modem

Kernel modules: snd-intel8x0m

00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Kernel modules: intel-rng

00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

        Latency: 0

        Interrupt: pin A routed to IRQ 18

        Region 0: I/O ports at 01f0 [size=8]

        Region 1: I/O ports at 03f4 [size=1]

        Region 2: I/O ports at 0170 [size=8]

        Region 3: I/O ports at 0374 [size=1]

        Region 4: I/O ports at 18c0 [size=16]

        Kernel driver in use: ata_piix

        Kernel modules: ata_piix, piix

00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Interrupt: pin B routed to IRQ 19

Region 4: I/O ports at 18e0 [size=32]

Kernel driver in use: i801_smbus

Kernel modules: i2c-i801

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE) (prog-if 00 [VGA controller])

Subsystem: Samsung Electronics Co Ltd Device e003

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 32 bytes

Interrupt: pin A routed to IRQ 16

Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]

Region 1: I/O ports at 3000 [size=256]

Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]

[virtual] Expansion ROM at c0120000 [disabled] [size=128K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] Express (v1) Endpoint, MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns,
L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0 <256ns, L1 <2us

ClockPM- Suprise- LLActRep- BwNot-

LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000

Capabilities: [100] Advanced Error Reporting <?>

06:05.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 32

Interrupt: pin A routed to IRQ 22

Region 0: Memory at c8004000 (32-bit, non-prefetchable) [size=8K]

Capabilities: [40] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

Kernel driver in use: b44

Kernel modules: b44

06:07.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
Subsystem: Intel Corporation Samsung P35 integrated WLAN

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes

Interrupt: pin A routed to IRQ 20

Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=4K]

Capabilities: [dc] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-

Kernel driver in use: ipw2200

Kernel modules: ipw2200

06:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

        Latency: 168

        Interrupt: pin A routed to IRQ 16

        Region 0: Memory at c8003000 (32-bit, non-prefetchable) [size=4K]

        Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176

        Memory window 0: 54000000-543ff000 (prefetchable)

        Memory window 1: 50000000-53fff000

        I/O window 0: 00005000-000050ff

        I/O window 1: 00005400-000054ff

        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+

        16-bit legacy interface ports at 0001

        Kernel driver in use: yenta_cardbus

        Kernel modules: yenta_socket

06:09.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) (prog-if 10 [OHCI])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (500ns min, 1000ns max)

Interrupt: pin B routed to IRQ 17

Region 0: Memory at c8001000 (32-bit, non-prefetchable) [size=2K]

Capabilities: [dc] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+

Kernel driver in use: ohci1394

Kernel modules: ohci1394

06:09.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 32

Interrupt: pin C routed to IRQ 18

Region 0: Memory at c8001800 (32-bit, non-prefetchable) [size=256]

Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

Kernel driver in use: sdhci

Kernel modules: sdhci

06:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at c8001c00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

06:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 03)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at c8002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

[7.6.] SCSI information (from /proc/scsi/scsi)

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: SAMSUNG HM120JC Rev: YL10
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: TEAC Model: DV-W28EA Rev: S.0A
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: WDC WD25 Model: 00BB-00GUC0 Rev: 0811
Type: Direct-Access ANSI SCSI revision: 00
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: HDT72252 Model: 5DLAT80 Rev: V44O
Type: Direct-Access ANSI SCSI revision: 00

[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you think to be relevant):

I hope this helps you fix my problem. :)

Edgar Kalkowski
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEARECAAYFAkjAaasACgkQ6s03tsVZHYGergCdFFqvhSRKhTO7zkyBDaMwU+20 ge0An2GoI9GBF16OBpKOkN+2y/TrAzG6
=feLy
-----END PGP SIGNATURE-----

#1 lore raw
Quoted 3 lines · On Fri, 05 Sep 2008 01:05:21 +0200 Edgar Kalkowski <[email protected]>…

Dear kernel hackers. ;)

[1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.

cc's added.

Might be USB, might be ALSA.

Quoted 1,179 lines

[2.] Full description of the problem/report:
If I unplug the Logitech Headset, the kernel prints the following message to /var/log/dmesg.log. I can unload the ehci module by executing "sudo rmmod ehci_hcd" but "sudo rmmod uhci_hcd" blocks infinitely and thus I suppose the Headset uses USB 1.1. "lsusb" shows the headset as

Bus 002 Device 004: ID 046d:0a01 Logitech, Inc. USB Headset

and I have no further information about the brand name or something. If I replug the headset or any other usb device it is no longer recognized by the system. I'm using a current arch linux install with KDE 4.1.1 on my Samsung R50 laptop. The above data (except the oops message) was collected after a reboot with a plugged in again and working headset.

The oops does not occur every time I unplug the headset but so far I have not been able to determine how to trigger the oops. I have tried to plug and unplug it a few times after a fresh reboot with no programs running but KDE and after four or five plugs and unplugs the kernel oopsed.

I hope this bug report helps you guys a little and this bug get's fixed at some time as it's quite annoying. ;)

[3.] Keywords (i.e., modules, networking, kernel): usb, usbcore, uhci_hcd, kernel, module, oops, crash

[4.] Kernel version (from /proc/version): Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.1 20080724 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008

[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)

usb 3-1: USB disconnect, address 2

BUG: unable to handle kernel paging request at 00100100
IP: [<f895f89d>] :snd:snd_ctl_dev_disconnect+0x5d/0x90
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: udf crc_itu_t michael_mic arc4 ecb ieee80211_crypt_tkip ipv6

radeon drm ntfs sdhci mmc_core pcspkr yenta_socket rsrc_nonstatic serio_raw psmouse ohci1394 ieee1394 i2c_i801 i2c_core snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep usb_storage video output intel_agp agpgart sg thermal fan button battery ac cpufreq_ondemand acpi_cpufreq freq_table processor snd_intel8x0m joydev snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device evdev usblp snd_intel8x0 usbhid hid ff_memless snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ipw2200 ieee80211 ieee80211_crypt b44 ssb pcmcia pcmcia_core firmware_class mii rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sr_mod sd_mod cdrom uhci_hcd ehci_hcd usbcore ata_piix ata_generic pata_acpi libata scsi_mod dock

Pid: 764, comm: khubd Not tainted (2.6.26-ARCH #1)
EIP: 0060:[<f895f89d>] EFLAGS: 00010282 CPU: 0
EIP is at snd_ctl_dev_disconnect+0x5d/0x90 [snd]
EAX: 00000000 EBX: 00100100 ECX: 00020004 EDX: 0000001d
ESI: f70f0b70 EDI: f70f0a00 EBP: f70f0b4c ESP: f7063e30
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process khubd (pid: 764, ti=f7062000 task=f7bf87e0 task.ti=f7062000)

Stack: 00000000 f7b6a020 00000000 f70f0a00 f70f0b40 f8961e96 22222222 f7b6a020
       f8961eea 00000000 f70f0a00 f70f0b8c 00000000 f895e1b8 22222222 f7b5de00
       f7b5de00 f8b148c0 f7b952c0 f8b03c48 f70f0a00 f7b5de00 f8b148c0 f7b5de1c
Call Trace:
 [<f8961e96>] snd_device_disconnect+0x66/0x90 [snd]
 [<f8961eea>] snd_device_disconnect_all+0x2a/0x50 [snd]
 [<f895e1b8>] snd_card_disconnect+0x148/0x1a0 [snd]
 [<f8b03c48>] usb_audio_disconnect+0x58/0x140 [snd_usb_audio]
 [<f88c1470>] usb_unbind_interface+0x50/0xa0 [usbcore]
 [<c026a5b5>] __device_release_driver+0x75/0xc0
 [<c026a6c0>] device_release_driver+0x20/0x40
 [<c0269c2a>] bus_remove_device+0x8a/0xc0
 [<c026868f>] device_del+0xef/0x150
 [<f88be644>] usb_disable_device+0x84/0xf0 [usbcore]
 [<f88ba180>] usb_disconnect+0xa0/0x140 [usbcore]
 [<f88bad03>] hub_thread+0x313/0x1170 [usbcore]
 [<c013f430>] autoremove_wake_function+0x0/0x50
 [<f88ba9f0>] hub_thread+0x0/0x1170 [usbcore]
 [<c013f149>] kthread+0x39/0x70
 [<c013f110>] kthread+0x0/0x70
 [<c0104c23>] kernel_thread_helper+0x7/0x14
 =======================
Code: 18 b9 01 00 00 00 ba 03 00 00 00 c7 04 24 00 00 00 00 e8 c7 30 7c c7 8d 43

28 b9 04 0002 00 ba 1d 00 00 00 e8 a5 44 83 c7 8b 1b <8b> 03 0f 18 00 90 39 f3 75 c9 89 e8 e8 d2 3c 7e c7 89 fa 31 c0
EIP: [<f895f89d>] snd_ctl_dev_disconnect+0x5d/0x90 [snd] SS:ESP 0068:f7063e30
- ---[ end trace 05aa0b5534340422 ]---

[6.] A small shell script or example program which triggers the
problem (if possible)

[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)

If some fields are empty or look unusual you may have an old version.

Compare to the current minimal requirements in Documentation/Changes.

Linux HEX 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686 Intel(R) Pentium(R) M processor 1.73GHz GenuineIntel GNU/Linux

Gnu C 4.3.1

Gnu make 3.81

binutils 2.18.0.20080610

util-linux 2.14

mount support

module-init-tools 3.4

e2fsprogs 1.40.8

jfsutils 1.1.12

reiserfsprogs 3.6.20

xfsprogs 2.9.8

pcmciautils 014

PPP 2.4.4

Linux C Library 2.8

Dynamic linker (ldd) 2.8

Linux C++ Library so.6.0

Procps 3.2.7

Net-tools 1.60

Kbd 1.13

Sh-utils 6.12

udev 119

wireless-tools 29

Modules Loaded michael_mic arc4 ecb ieee80211_crypt_tkip
cpufreq_ondemand snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep ipv6 radeon drm ntfs joydev pcspkr serio_raw psmouse i2c_i801 i2c_core usblp sdhci ohci1394 mmc_core ieee1394 yenta_socket rsrc_nonstatic usb_storage usbhid hid ff_memless video output intel_agp agpgart sg thermal evdev fan button battery ac acpi_cpufreq freq_table processor snd_intel8x0m snd_intel8x0 snd_ac97_codec snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ipw2200 ieee80211 ieee80211_crypt b44 ssb pcmcia pcmcia_core firmware_class mii rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sr_mod cdrom sd_mod ehci_hcd uhci_hcd usbcore ata_piix ata_generic pata_acpi libata scsi_mod dock

[7.2.] Processor information (from /proc/cpuinfo):

processor : 0

vendor_id : GenuineIntel

cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.73GHz
stepping : 8
cpu MHz : 1733.000
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2
bogomips : 3462.30
clflush size : 64
power management:

[7.3.] Module information (from /proc/modules):

michael_mic 4224 4 - Live 0xf8c4d000
arc4 3712 4 - Live 0xf8849000
ecb 4608 4 - Live 0xf8b65000
ieee80211_crypt_tkip 10752 2 - Live 0xf8c49000 cpufreq_ondemand 8716 1 - Live 0xf8c3c000
snd_usb_audio 81152 1 - Live 0xf94a0000
snd_usb_lib 17024 1 snd_usb_audio, Live 0xf8c50000 snd_rawmidi 21504 1 snd_usb_lib, Live 0xf8b16000
snd_hwdep 8964 1 snd_usb_audio, Live 0xf8b39000
ipv6 259684 63 - Live 0xf94d2000
radeon 137248 2 - Live 0xf8c60000
drm 73896 3 radeon, Live 0xf8b51000
ntfs 221664 1 - Live 0xf8b6a000
joydev 11584 0 - Live 0xf8b04000
pcspkr 4352 0 - Live 0xf8b01000
serio_raw 7044 0 - Live 0xf8acc000
psmouse 38288 0 - Live 0xf8b1d000
i2c_i801 10384 0 - Live 0xf8a93000
i2c_core 21140 1 i2c_i801, Live 0xf8b09000
usblp 13824 0 - Live 0xf8af0000
sdhci 16388 0 - Live 0xf8a8d000
ohci1394 30128 0 - Live 0xf8ae7000
mmc_core 43036 1 sdhci, Live 0xf8af5000
ieee1394 80696 1 ohci1394, Live 0xf8ab7000
yenta_socket 24972 1 - Live 0xf8aaf000
rsrc_nonstatic 12800 1 yenta_socket, Live 0xf8a88000 usb_storage 90560 1 - Live 0xf8acf000
usbhid 46016 0 - Live 0xf8aa2000
hid 40960 1 usbhid, Live 0xf8a97000
ff_memless 6664 1 usbhid, Live 0xf8a2b000
video 18064 0 - Live 0xf8a82000
output 4608 1 video, Live 0xf8a51000
intel_agp 26428 0 - Live 0xf8a67000
agpgart 29652 2 drm,intel_agp, Live 0xf8a79000
sg 28596 0 - Live 0xf8a71000
thermal 16796 0 - Live 0xf8a61000
evdev 10880 10 - Live 0xf8a56000
fan 6020 0 - Live 0xf8a2e000
button 7824 0 - Live 0xf8a1c000
battery 12036 0 - Live 0xf8a4d000
ac 6020 0 - Live 0xf8a22000
acpi_cpufreq 9228 0 - Live 0xf8a27000
freq_table 5568 2 cpufreq_ondemand,acpi_cpufreq, Live 0xf8a1f000 processor 33836 3 thermal,acpi_cpufreq, Live 0xf89a6000 snd_intel8x0m 15500 0 - Live 0xf89cf000
snd_intel8x0 30748 1 - Live 0xf8a13000
snd_ac97_codec 99748 2 snd_intel8x0m,snd_intel8x0, Live 0xf8a33000 snd_seq_oss 31872 0 - Live 0xf89b1000
snd_seq_midi_event 8192 1 snd_seq_oss, Live 0xf897d000 snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event, Live 0xf8a05000 snd_seq_device 8332 3 snd_rawmidi,snd_seq_oss,snd_seq, Live 0xf8979000 snd_pcm_oss 40192 0 - Live 0xf895b000
snd_pcm 69636 5 snd_usb_audio,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss, Live 0xf89bc000

snd_timer 21384 2 snd_seq,snd_pcm, Live 0xf8947000

snd_page_alloc 9608 3 snd_intel8x0m,snd_intel8x0,snd_pcm, Live 0xf8957000

snd_mixer_oss 16512 1 snd_pcm_oss, Live 0xf8916000

snd 50724 17 snd_usb_audio,snd_rawmidi,snd_hwdep,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss, Live 0xf8967000
soundcore 8032 1 snd, Live 0xf8944000

ac97_bus 3584 1 snd_ac97_codec, Live 0xf8822000

ipw2200 142408 0 - Live 0xf8982000

ieee80211 31176 1 ipw2200, Live 0xf894e000

ieee80211_crypt 6532 2 ieee80211_crypt_tkip,ieee80211, Live 0xf88e4000

b44 26512 0 - Live 0xf893c000

ssb 39684 1 b44, Live 0xf88f6000

pcmcia 34476 1 ssb, Live 0xf890c000

pcmcia_core 34708 4 yenta_socket,rsrc_nonstatic,ssb,pcmcia, Live 0xf8902000

firmware_class 9088 2 ipw2200,pcmcia, Live 0xf88dc000

mii 6528 1 b44, Live 0xf88d9000
rtc_cmos 11424 0 - Live 0xf888c000
rtc_core 17436 1 rtc_cmos, Live 0xf887c000
rtc_lib 4480 1 rtc_core, Live 0xf8846000
ext3 125704 3 - Live 0xf891c000
jbd 45716 1 ext3, Live 0xf88e9000
mbcache 8708 1 ext3, Live 0xf8842000
sr_mod 16836 0 - Live 0xf8876000
cdrom 36128 1 sr_mod, Live 0xf8882000
sd_mod 25240 7 - Live 0xf886e000
ehci_hcd 35596 0 - Live 0xf8864000
uhci_hcd 23952 0 - Live 0xf8831000
usbcore 132080 8 snd_usb_audio,snd_usb_lib,usblp,usb_storage,usbhid,ehci_hcd,uhci_hcd, Live 0xf88b7000
ata_piix 17924 4 - Live 0xf8839000
ata_generic 6788 0 - Live 0xf882e000
pata_acpi 6016 0 - Live 0xf882b000
libata 150048 3 ata_piix,ata_generic,pata_acpi, Live 0xf8891000 scsi_mod 95692 5 usb_storage,sg,sr_mod,sd_mod,libata, Live 0xf884b000 dock 9488 1 libata, Live 0xf8827000

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)

$ cat /proc/ioports

0000-001f : dma1

0020-0021 : pic1

0040-0043 : timer0

0050-0053 : timer1

0060-0060 : keyboard

0064-0064 : keyboard

0070-0077 : rtc0

0080-008f : dma page reg

00a0-00a1 : pic2

00c0-00df : dma2

00f0-00ff : fpu

0170-0177 : 0000:00:1f.1

0170-0177 : ata_piix

01f0-01f7 : 0000:00:1f.1

01f0-01f7 : ata_piix

0376-0376 : 0000:00:1f.1

0376-0376 : ata_piix

03c0-03df : vga+

03f6-03f6 : 0000:00:1f.1

03f6-03f6 : ata_piix

0680-06ff : pnp 00:06

0800-080f : pnp 00:06

0900-090f : pnp 00:06

0cf8-0cff : PCI conf1

1000-107f : 0000:00:1f.0

1000-107f : pnp 00:06

    1000-1003 : ACPI PM1a_EVT_BLK

    1004-1005 : ACPI PM1a_CNT_BLK

    1008-100b : ACPI PM_TMR

    1010-1015 : ACPI CPU throttle

    1020-1020 : ACPI PM2_CNT_BLK

    1028-102f : ACPI GPE0_BLK

1180-11bf : 0000:00:1f.0

1180-11bf : pnp 00:06

1640-164f : pnp 00:06

1800-181f : 0000:00:1d.0

1800-181f : uhci_hcd

1820-183f : 0000:00:1d.1

1820-183f : uhci_hcd

1840-185f : 0000:00:1d.2

1840-185f : uhci_hcd

1860-187f : 0000:00:1d.3
1860-187f : uhci_hcd
1880-18bf : 0000:00:1e.2
1880-18bf : Intel ICH6
18c0-18cf : 0000:00:1f.1
18c0-18cf : ata_piix
18e0-18ff : 0000:00:1f.3
18e0-18ff : i801_smbus
1c00-1cff : 0000:00:1e.2
1c00-1cff : Intel ICH6
2000-207f : 0000:00:1e.3
2000-207f : Intel ICH6 Modem
2400-24ff : 0000:00:1e.3
2400-24ff : Intel ICH6 Modem
3000-3fff : PCI Bus 0000:01
3000-30ff : 0000:01:00.0
4000-4fff : PCI Bus 0000:02
5000-5fff : PCI Bus 0000:06
5000-50ff : PCI CardBus 0000:07
5400-54ff : PCI CardBus 0000:07

$ cat /proc/iomem

00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ce1ff : Video ROM
000d0000-000d3fff : Adapter ROM
000d4000-000d4fff : Adapter ROM
000f0000-000fffff : System ROM
00100000-3fe9ffff : System RAM
00100000-0031211d : Kernel code
0031211e-003cc37f : Kernel data
00415000-004e527f : Kernel bss
3fea0000-3feb0fff : ACPI Tables
3feb1000-3fefffff : ACPI Non-volatile Storage
3ff00000-3fffffff : reserved
50000000-53ffffff : PCI CardBus 0000:07
54000000-543fffff : PCI CardBus 0000:07
c0000000-c00003ff : 0000:00:1d.7
c0000000-c00003ff : ehci_hcd
c0000400-c00004ff : 0000:00:1e.2
c0000400-c00004ff : Intel ICH6
c0000800-c00009ff : 0000:00:1e.2
c0000800-c00009ff : Intel ICH6
c0100000-c01fffff : PCI Bus 0000:01
c0100000-c010ffff : 0000:01:00.0
c0120000-c013ffff : 0000:01:00.0
c4000000-c7ffffff : PCI Bus 0000:02
c8000000-c80fffff : PCI Bus 0000:06
c8000000-c8000fff : 0000:06:07.0

    c8000000-c8000fff : ipw2200
  c8001000-c80017ff : 0000:06:09.1
    c8001000-c80017ff : ohci1394
  c8001800-c80018ff : 0000:06:09.2
    c8001800-c80018ff : mmc0
  c8001c00-c8001cff : 0000:06:09.3
  c8002000-c80020ff : 0000:06:09.4
  c8003000-c8003fff : 0000:06:09.0
    c8003000-c8003fff : yenta_socket
  c8004000-c8005fff : 0000:06:05.0
    c8004000-c8005fff : 0000:06:05.0

d0000000-d7ffffff : PCI Bus 0000:01
d0000000-d7ffffff : 0000:01:00.0
d8000000-dbffffff : PCI Bus 0000:02
e0000000-f0005fff : reserved
e0000000-efffffff : PCI MMCONFIG 0
f0008000-f000bfff : reserved
fed00000-fed003ff : HPET 0
fed00000-fed003ff : reserved
fed20000-fed8ffff : reserved
ff000000-ffffffff : reserved

[7.5.] PCI information ('lspci -vvv' as root)

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-

Latency: 0

Capabilities: [e0] Vendor Specific Information <?>

Kernel modules: intel-agp

00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 32 bytes

Bus: primary=00, secondary=01, subordinate=01, sec-latency=0

I/O behind bridge: 00003000-00003fff

Memory behind bridge: c0100000-c01fffff

Prefetchable memory behind bridge: d0000000-d7ffffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [88] Subsystem: Samsung Electronics Co Ltd Device b035

Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000

Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1
<1us
ExtTag- RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0 <256ns, L1 <4us

ClockPM- Suprise- LLActRep- BwNot-

LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-

SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [100] Virtual Channel <?>

Capabilities: [140] Root Complex Link <?>

Kernel driver in use: pcieport-driver

Kernel modules: shpchp

00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

        Latency: 0, Cache Line Size: 32 bytes

        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0

        I/O behind bridge: 00004000-00004fff

        Memory behind bridge: c4000000-c7ffffff

        Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff

        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited

ExtTag+ RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <1us, L1 <4us

ClockPM- Suprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surpise+
Slot # 2, PowerLimit 6.500000; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000

Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device b035

Capabilities: [a0] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [100] Virtual Channel <?>

Capabilities: [180] Root Complex Link <?>

Kernel driver in use: pcieport-driver

Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 23

Region 4: I/O ports at 1800 [size=32]

Kernel driver in use: uhci_hcd

Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin B routed to IRQ 19

Region 4: I/O ports at 1820 [size=32]

Kernel driver in use: uhci_hcd

Kernel modules: uhci-hcd

00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin C routed to IRQ 18

Region 4: I/O ports at 1840 [size=32]

Kernel driver in use: uhci_hcd

Kernel modules: uhci-hcd

00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin D routed to IRQ 16

Region 4: I/O ports at 1860 [size=32]

Kernel driver in use: uhci_hcd

Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 23

Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] Debug port: BAR=1 offset=00a0

Kernel driver in use: ehci_hcd

Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

        Latency: 0

        Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32

        I/O behind bridge: 00005000-00005fff

        Memory behind bridge: c8000000-c80fffff

        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [50] Subsystem: Gammagraphx, Inc. Device 0000

00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

        Latency: 0

        Interrupt: pin A routed to IRQ 17

        Region 0: I/O ports at 1c00 [size=256]

        Region 1: I/O ports at 1880 [size=64]

        Region 2: Memory at c0000800 (32-bit, non-prefetchable) [size=512]

        Region 3: Memory at c0000400 (32-bit, non-prefetchable) [size=256]

        Capabilities: [50] Power Management version 2

                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA

PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Kernel driver in use: Intel ICH

Kernel modules: snd-intel8x0

00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])

Subsystem: Samsung Electronics Co Ltd Device 2115

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin B routed to IRQ 20

Region 0: I/O ports at 2400 [size=256]

Region 1: I/O ports at 2000 [size=128]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Kernel driver in use: Intel ICH Modem

Kernel modules: snd-intel8x0m

00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Kernel modules: intel-rng

00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

        Latency: 0

        Interrupt: pin A routed to IRQ 18

        Region 0: I/O ports at 01f0 [size=8]

        Region 1: I/O ports at 03f4 [size=1]

        Region 2: I/O ports at 0170 [size=8]

        Region 3: I/O ports at 0374 [size=1]

        Region 4: I/O ports at 18c0 [size=16]

        Kernel driver in use: ata_piix

        Kernel modules: ata_piix, piix

00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Interrupt: pin B routed to IRQ 19

Region 4: I/O ports at 18e0 [size=32]

Kernel driver in use: i801_smbus

Kernel modules: i2c-i801

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE) (prog-if 00 [VGA controller])

Subsystem: Samsung Electronics Co Ltd Device e003

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 32 bytes

Interrupt: pin A routed to IRQ 16

Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]

Region 1: I/O ports at 3000 [size=256]

Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]

[virtual] Expansion ROM at c0120000 [disabled] [size=128K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] Express (v1) Endpoint, MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns,
L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0 <256ns, L1 <2us

ClockPM- Suprise- LLActRep- BwNot-

LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000

Capabilities: [100] Advanced Error Reporting <?>

06:05.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-

Latency: 32

Interrupt: pin A routed to IRQ 22

Region 0: Memory at c8004000 (32-bit, non-prefetchable) [size=8K]

Capabilities: [40] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

Kernel driver in use: b44

Kernel modules: b44

06:07.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
Subsystem: Intel Corporation Samsung P35 integrated WLAN

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes

Interrupt: pin A routed to IRQ 20

Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=4K]

Capabilities: [dc] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-

Kernel driver in use: ipw2200

Kernel modules: ipw2200

06:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

        Latency: 168

        Interrupt: pin A routed to IRQ 16

        Region 0: Memory at c8003000 (32-bit, non-prefetchable) [size=4K]

        Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176

        Memory window 0: 54000000-543ff000 (prefetchable)

        Memory window 1: 50000000-53fff000

        I/O window 0: 00005000-000050ff

        I/O window 1: 00005400-000054ff

        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+

        16-bit legacy interface ports at 0001

        Kernel driver in use: yenta_cardbus

        Kernel modules: yenta_socket

06:09.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) (prog-if 10 [OHCI])

Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (500ns min, 1000ns max)

Interrupt: pin B routed to IRQ 17

Region 0: Memory at c8001000 (32-bit, non-prefetchable) [size=2K]

Capabilities: [dc] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+

Kernel driver in use: ohci1394

Kernel modules: ohci1394

06:09.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 32

Interrupt: pin C routed to IRQ 18

Region 0: Memory at c8001800 (32-bit, non-prefetchable) [size=256]

Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

Kernel driver in use: sdhci

Kernel modules: sdhci

06:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
Subsystem: Samsung Electronics Co Ltd Device b035

Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at c8001c00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

06:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 03)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at c8002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

[7.6.] SCSI information (from /proc/scsi/scsi)

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: SAMSUNG HM120JC Rev: YL10
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: TEAC Model: DV-W28EA Rev: S.0A
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: WDC WD25 Model: 00BB-00GUC0 Rev: 0811
Type: Direct-Access ANSI SCSI revision: 00
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: HDT72252 Model: 5DLAT80 Rev: V44O
Type: Direct-Access ANSI SCSI revision: 00

[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you think to be relevant):

I hope this helps you fix my problem. :)

#2 lore raw

At Thu, 4 Sep 2008 17:28:22 -0700,

Quoted 11 lines · Andrew Morton
Quoted 3 lines · On Fri, 05 Sep 2008 01:05:21 +0200 Edgar Kalkowski <[email protected]>…

Dear kernel hackers. ;)

[1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.

cc's added.

Might be USB, might be ALSA.

Hm, it's hard to guess...
Edgar, could you check whether it happens with 2.6.25?

thanks,

Takashi

#3 lore raw
Quoted 8 lines · Takashi Iwai

At Thu, 4 Sep 2008 17:28:22 -0700,

Quoted 6 lines · Andrew Morton
Quoted 2 lines · On Fri, 05 Sep 2008 01:05:21 +0200 Edgar Kalkowski <[email protected]>…

Dear kernel hackers. ;)

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

[1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.

cc's added.

Might be USB, might be ALSA.

Hm, it's hard to guess...
Edgar, could you check whether it happens with 2.6.25?

Hi,

I recognize this address:

Quoted 1 line
Quoted 1 line
Quoted 1 line
BUG: unable to handle kernel paging request at 00100100

Is this a magic value? I also got it, see for example:
http://lkml.org/lkml/2008/8/21/426

Google will also recognize it:
http://www.google.com/search?hl=en&q="unable+to+handle+kernel+paging+request"+00100100

Where does it come from?

Vegard

Signature · 4 lines
"The animistic metaphor of the bug that maliciously sneaked in while
the programmer was not looking is intellectually dishonest as it
disguises that the error is the programmer's own creation."
	-- E. W. Dijkstra, EWD1036
#4 lore raw
Quoted 24 lines · Vegard Nossum
Quoted 8 lines · Takashi Iwai

At Thu, 4 Sep 2008 17:28:22 -0700,

Quoted 6 lines · Andrew Morton
Quoted 2 lines · On Fri, 05 Sep 2008 01:05:21 +0200 Edgar Kalkowski <[email protected]>…

Dear kernel hackers. ;)

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

[1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.

cc's added.

Might be USB, might be ALSA.

Hm, it's hard to guess...
Edgar, could you check whether it happens with 2.6.25?

Hi,

I recognize this address:

Quoted 1 line
Quoted 1 line
Quoted 1 line
BUG: unable to handle kernel paging request at 00100100
Quoted 7 lines

Is this a magic value? I also got it, see for example:
http://lkml.org/lkml/2008/8/21/426

Google will also recognize it:
http://www.google.com/search?hl=en&q="unable+to+handle+kernel+paging+request"+00100100

Where does it come from?

Oh. It _is_ LIST_POISON1. Sorry for the bit of noise.

Vegard

Signature · 4 lines
"The animistic metaphor of the bug that maliciously sneaked in while
the programmer was not looking is intellectually dishonest as it
disguises that the error is the programmer's own creation."
	-- E. W. Dijkstra, EWD1036
#5 lore raw
Quoted 28 lines · Vegard Nossum
Quoted 27 lines · Vegard Nossum
Quoted 8 lines · Takashi Iwai

At Thu, 4 Sep 2008 17:28:22 -0700,

Quoted 6 lines · Andrew Morton
Quoted 2 lines · On Fri, 05 Sep 2008 01:05:21 +0200 Edgar Kalkowski <[email protected]>…

Dear kernel hackers. ;)

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

[1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.

cc's added.

Might be USB, might be ALSA.

Hm, it's hard to guess...
Edgar, could you check whether it happens with 2.6.25?

Hi,

I recognize this address:

Quoted 1 line
Quoted 1 line
Quoted 1 line
BUG: unable to handle kernel paging request at 00100100

Is this a magic value? I also got it, see for example:
http://lkml.org/lkml/2008/8/21/426

Quoted 6 lines
Quoted 4 lines

Google will also recognize it:
http://www.google.com/search?hl=en&q="unable+to+handle+kernel+paging+request"+00100100

Where does it come from?

Oh. It _is_ LIST_POISON1. Sorry for the bit of noise.

Probably totally unrelated, but I couldn't help to find this bit of code somewhat odd. In snd_ctl_dev_disconnect():

        down_read(&card->controls_rwsem);
        list_for_each_entry(ctl, &card->ctl_files, list) {
                wake_up(&ctl->change_sleep);
                kill_fasync(&ctl->fasync, SIGIO, POLL_ERR);
        }
        up_read(&card->controls_rwsem);

...shouldn't that be using &card->ctl_files_rwlock instead of &card->controls_rwsem? That one is always used to protect the list ops on &card->ctl_files in all the other places. Or maybe it is already locked from higher ups?

Vegard

Signature · 4 lines
"The animistic metaphor of the bug that maliciously sneaked in while
the programmer was not looking is intellectually dishonest as it
disguises that the error is the programmer's own creation."
	-- E. W. Dijkstra, EWD1036
#6 lore raw

At Fri, 5 Sep 2008 10:18:06 +0200,

Quoted 47 lines · Vegard Nossum
Quoted 28 lines · Vegard Nossum
Quoted 27 lines · Vegard Nossum
Quoted 8 lines · Takashi Iwai

At Thu, 4 Sep 2008 17:28:22 -0700,

Quoted 6 lines · Andrew Morton
Quoted 2 lines · On Fri, 05 Sep 2008 01:05:21 +0200 Edgar Kalkowski <[email protected]>…

Dear kernel hackers. ;)

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

[1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.

cc's added.

Might be USB, might be ALSA.

Hm, it's hard to guess...
Edgar, could you check whether it happens with 2.6.25?

Hi,

I recognize this address:

Quoted 1 line
Quoted 1 line
Quoted 1 line
BUG: unable to handle kernel paging request at 00100100

Is this a magic value? I also got it, see for example:
http://lkml.org/lkml/2008/8/21/426

Quoted 6 lines
Quoted 4 lines

Google will also recognize it:
http://www.google.com/search?hl=en&q="unable+to+handle+kernel+paging+request"+00100100

Where does it come from?

Oh. It _is_ LIST_POISON1. Sorry for the bit of noise.

Probably totally unrelated, but I couldn't help to find this bit of code somewhat odd. In snd_ctl_dev_disconnect():

        down_read(&card->controls_rwsem);
        list_for_each_entry(ctl, &card->ctl_files, list) {
                wake_up(&ctl->change_sleep);
                kill_fasync(&ctl->fasync, SIGIO, POLL_ERR);
        }
        up_read(&card->controls_rwsem);
Quoted 4 lines

...shouldn't that be using &card->ctl_files_rwlock instead of &card->controls_rwsem? That one is always used to protect the list ops on &card->ctl_files in all the other places. Or maybe it is already locked from higher ups?

I think you're right. This should be card->ctl_files_rwlock. Will fix up the code later.

thanks,

Takashi

#7 lore raw
In reply to Takashi Iwai

Sorry that it lasted a while, I had to compile a 2.6.25 kernel. But the error is just the same with it. The funny thing is that it does not happen always but only sometimes (I have to unplug and replug about 5 times until the error occurrs). Looks to me like a threading issue if I may dare to guess. ;)

Regards!

Edgar

Quoted 20 lines · Takashi Iwai

At Thu, 4 Sep 2008 17:28:22 -0700,

Quoted 9 lines · Andrew Morton
Quoted 3 lines · On Fri, 05 Sep 2008 01:05:21 +0200 Edgar Kalkowski <[email protected]>…

Dear kernel hackers. ;)

[1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.

cc's added.

Might be USB, might be ALSA.

Hm, it's hard to guess...
Edgar, could you check whether it happens with 2.6.25?

thanks,

Takashi