Skip to contentSkip to conversation

APIC frequency too slow on HP dv5z

DISCUSSION Howard Chu 2 participants 5 messages Sep 30, 2008 – Oct 2, 2008

lore
Share & tools
lore

Howard Chu

author
#0 lore raw

More often than not, on a warm boot I see something like this

msg.new:[    1.940031] Using local APIC timer interrupts.
msg.new:[    1.944031] APIC timer calibration result 466046
msg.new:[    1.944031] Detected 0.466 MHz APIC timer.
msg.new:[    1.944031] APIC frequency too slow, disabling apic timer

On cold boots it may see 12.5MHz, or may not...

[    2.000584] Using local APIC timer interrupts.
[    2.004067] APIC timer calibration result 12500236
[    2.004080] Detected 12.500 MHz APIC timer.

I haven't figured out yet what the pattern is behind the behavior. Has anyone else seen this kind of problem before?

Signature · 4 lines
  -- Howard Chu
  CTO, Symas Corp.           http://www.symas.com
  Director, Highland Sun     http://highlandsun.com/hyc/
  Chief Architect, OpenLDAP  http://www.openldap.org/project/
#1 lore raw
Quoted 7 lines · Howard Chu

More often than not, on a warm boot I see something like this

msg.new:[    1.940031] Using local APIC timer interrupts.
msg.new:[    1.944031] APIC timer calibration result 466046
msg.new:[    1.944031] Detected 0.466 MHz APIC timer.
msg.new:[    1.944031] APIC frequency too slow, disabling apic timer
Quoted 8 lines

On cold boots it may see 12.5MHz, or may not...

[    2.000584] Using local APIC timer interrupts.
[    2.004067] APIC timer calibration result 12500236
[    2.004080] Detected 12.500 MHz APIC timer.

I haven't figured out yet what the pattern is behind the behavior. Has anyone else seen this kind of problem before?

Hmm, strange. Which kernel version ?

Thanks,

tglx

author
#2 lore raw
Quoted 11 lines · Thomas Gleixner
Quoted 9 lines · Howard Chu

More often than not, on a warm boot I see something like this

msg.new:[    1.940031] Using local APIC timer interrupts.
msg.new:[    1.944031] APIC timer calibration result 466046
msg.new:[    1.944031] Detected 0.466 MHz APIC timer.
msg.new:[    1.944031] APIC frequency too slow, disabling apic timer

On cold boots it may see 12.5MHz, or may not...

Quoted 8 lines
Quoted 6 lines
[    2.000584] Using local APIC timer interrupts.
[    2.004067] APIC timer calibration result 12500236
[    2.004080] Detected 12.500 MHz APIC timer.

I haven't figured out yet what the pattern is behind the behavior. Has anyone else seen this kind of problem before?

Hmm, strange. Which kernel version ?

I only started paying attention recently. 2.6.27-rc4 thru rc7 for sure. I'm running rc7 right now, that's what those log snippets are from.

Signature · 4 lines
  -- Howard Chu
  CTO, Symas Corp.           http://www.symas.com
  Director, Highland Sun     http://highlandsun.com/hyc/
  Chief Architect, OpenLDAP  http://www.openldap.org/project/
#3 lore raw
Quoted 16 lines · Howard Chu
Quoted 15 lines · Thomas Gleixner
Quoted 13 lines · Howard Chu

More often than not, on a warm boot I see something like this

msg.new:[    1.940031] Using local APIC timer interrupts.
msg.new:[    1.944031] APIC timer calibration result 466046
msg.new:[    1.944031] Detected 0.466 MHz APIC timer.
msg.new:[    1.944031] APIC frequency too slow, disabling apic timer

On cold boots it may see 12.5MHz, or may not...

[    2.000584] Using local APIC timer interrupts.
[    2.004067] APIC timer calibration result 12500236
[    2.004080] Detected 12.500 MHz APIC timer.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines

I haven't figured out yet what the pattern is behind the behavior. Has anyone
else seen this kind of problem before?

Hmm, strange. Which kernel version ?

I only started paying attention recently. 2.6.27-rc4 thru rc7 for sure. I'm running rc7 right now, that's what those log snippets are from.

Ok. Can you please add apic=verbose to the kernel command line so we get more detailed info about that ?

Thanks,

tglx

author
#4 lore raw
Quoted 20 lines · Thomas Gleixner
Quoted 19 lines · Howard Chu
Quoted 18 lines · Thomas Gleixner
Quoted 16 lines · Howard Chu

More often than not, on a warm boot I see something like this

msg.new:[    1.940031] Using local APIC timer interrupts.
msg.new:[    1.944031] APIC timer calibration result 466046
msg.new:[    1.944031] Detected 0.466 MHz APIC timer.
msg.new:[    1.944031] APIC frequency too slow, disabling apic timer

On cold boots it may see 12.5MHz, or may not...

[    2.000584] Using local APIC timer interrupts.
[    2.004067] APIC timer calibration result 12500236
[    2.004080] Detected 12.500 MHz APIC timer.

I haven't figured out yet what the pattern is behind the behavior. Has anyone
else seen this kind of problem before?

Quoted 6 lines
Quoted 3 lines
Quoted 1 line

Hmm, strange. Which kernel version ?

I only started paying attention recently. 2.6.27-rc4 thru rc7 for sure. I'm running rc7 right now, that's what those log snippets are from.

Ok. Can you please add apic=verbose to the kernel command line so we get more detailed info about that ?

OK. Of course since you asked for it, the problem refused to show up. It took about a dozen reboots before it appeared again. And then it took 3-4 reboots to make it go away. Full dmesg output is here:
http://www.highlandsun.com/hyc/msg.rc7.bad.gz
http://www.highlandsun.com/hyc/msg.rc7.ok.gz

Signature · 4 lines
  -- Howard Chu
  CTO, Symas Corp.           http://www.symas.com
  Director, Highland Sun     http://highlandsun.com/hyc/
  Chief Architect, OpenLDAP  http://www.openldap.org/project/