APIC frequency too slow on HP dv5z
More often than not, on a warm boot I see something like this
msg.new:[ 1.940031] Using local APIC timer interrupts. msg.new:[ 1.944031] APIC timer calibration result 466046 msg.new:[ 1.944031] Detected 0.466 MHz APIC timer. msg.new:[ 1.944031] APIC frequency too slow, disabling apic timer
On cold boots it may see 12.5MHz, or may not...
[ 2.000584] Using local APIC timer interrupts. [ 2.004067] APIC timer calibration result 12500236 [ 2.004080] Detected 12.500 MHz APIC timer.
I haven't figured out yet what the pattern is behind the behavior. Has anyone else seen this kind of problem before?
Signature · 4 lines
-- Howard Chu CTO, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/
Quoted 7 lines · Howard Chu
More often than not, on a warm boot I see something like this
msg.new:[ 1.940031] Using local APIC timer interrupts. msg.new:[ 1.944031] APIC timer calibration result 466046 msg.new:[ 1.944031] Detected 0.466 MHz APIC timer. msg.new:[ 1.944031] APIC frequency too slow, disabling apic timer
Quoted 8 lines
On cold boots it may see 12.5MHz, or may not...
[ 2.000584] Using local APIC timer interrupts. [ 2.004067] APIC timer calibration result 12500236 [ 2.004080] Detected 12.500 MHz APIC timer.I haven't figured out yet what the pattern is behind the behavior. Has anyone else seen this kind of problem before?
Hmm, strange. Which kernel version ?
Thanks,
tglx
Quoted 11 lines · Thomas Gleixner
Quoted 9 lines · Howard Chu
More often than not, on a warm boot I see something like this
msg.new:[ 1.940031] Using local APIC timer interrupts. msg.new:[ 1.944031] APIC timer calibration result 466046 msg.new:[ 1.944031] Detected 0.466 MHz APIC timer. msg.new:[ 1.944031] APIC frequency too slow, disabling apic timerOn cold boots it may see 12.5MHz, or may not...
Quoted 8 lines
Quoted 6 lines
[ 2.000584] Using local APIC timer interrupts. [ 2.004067] APIC timer calibration result 12500236 [ 2.004080] Detected 12.500 MHz APIC timer.I haven't figured out yet what the pattern is behind the behavior. Has anyone else seen this kind of problem before?
Hmm, strange. Which kernel version ?
I only started paying attention recently. 2.6.27-rc4 thru rc7 for sure. I'm running rc7 right now, that's what those log snippets are from.
Signature · 4 lines
-- Howard Chu CTO, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/
Quoted 16 lines · Howard Chu
Quoted 15 lines · Thomas Gleixner
Quoted 13 lines · Howard Chu
More often than not, on a warm boot I see something like this
msg.new:[ 1.940031] Using local APIC timer interrupts. msg.new:[ 1.944031] APIC timer calibration result 466046 msg.new:[ 1.944031] Detected 0.466 MHz APIC timer. msg.new:[ 1.944031] APIC frequency too slow, disabling apic timerOn cold boots it may see 12.5MHz, or may not...
[ 2.000584] Using local APIC timer interrupts. [ 2.004067] APIC timer calibration result 12500236 [ 2.004080] Detected 12.500 MHz APIC timer.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
I haven't figured out yet what the pattern is behind the behavior. Has anyone
else seen this kind of problem before?Hmm, strange. Which kernel version ?
I only started paying attention recently. 2.6.27-rc4 thru rc7 for sure. I'm running rc7 right now, that's what those log snippets are from.
Ok. Can you please add apic=verbose to the kernel command line so we get more detailed info about that ?
Thanks,
tglx
Quoted 20 lines · Thomas Gleixner
Quoted 19 lines · Howard Chu
Quoted 18 lines · Thomas Gleixner
Quoted 16 lines · Howard Chu
More often than not, on a warm boot I see something like this
msg.new:[ 1.940031] Using local APIC timer interrupts. msg.new:[ 1.944031] APIC timer calibration result 466046 msg.new:[ 1.944031] Detected 0.466 MHz APIC timer. msg.new:[ 1.944031] APIC frequency too slow, disabling apic timerOn cold boots it may see 12.5MHz, or may not...
[ 2.000584] Using local APIC timer interrupts. [ 2.004067] APIC timer calibration result 12500236 [ 2.004080] Detected 12.500 MHz APIC timer.I haven't figured out yet what the pattern is behind the behavior. Has anyone
else seen this kind of problem before?
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
Hmm, strange. Which kernel version ?
I only started paying attention recently. 2.6.27-rc4 thru rc7 for sure. I'm running rc7 right now, that's what those log snippets are from.
Ok. Can you please add apic=verbose to the kernel command line so we get more detailed info about that ?
OK. Of course since you asked for it, the problem refused to show up. It took about a dozen reboots before it appeared again. And then it took 3-4 reboots to make it go away. Full dmesg output is here:
http://www.highlandsun.com/hyc/msg.rc7.bad.gz
http://www.highlandsun.com/hyc/msg.rc7.ok.gz
Signature · 4 lines
-- Howard Chu CTO, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/