Skip to contentSkip to conversation

A USB enclosure that supports SCSI-ATA-Passthru (cheap!)

DISCUSSION Mark Lord 1 participant 2 messages Oct 19, 2008 libata

lore
Share & tools
lore

Mark Lord

author
#0 lore raw

I believe this is of possible interest to others here:

Most newer USB enclosures now support SCSI STOP/START commands.

But.. the Western Digital 2.5" mobile USB2 enclosures (SATA inside) appear to also support the SCSI-ATA-Command-Passthru protocol. These are the first ones I have seen here that do this.

So, things like "hdparm -I /dev/sdb" work without fuss on an external USB drive when used with these enclosures. As does setting automatic spin-down with "hdparm -S".

And as an added bonus, they're rather cheaply priced with drive included.

On the downside, smartctl does not work with the one I have here, complaining thusly:

Quoted 11 lines
$ smartctl -a  -T permissive -T permissive /dev/sdb
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

Device: WD 823AS External Version: 1.04
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0

Quoted 1 line
Quoted 1 line

Terminate command early due to bad response to IEC mode page

Error Counter logging not supported
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0 Device does not support Self Test logging

Regardless, these devices are commonly available at Costco and other discount retailers. Mine came with a 250GB drive inside, and has model number WS2500XMS-00 on the outside. I hope to pick up another with a 320GB drive soon-ish, and see if it also has passthru.

Model:  WD-250XMS-00 (with 250GB drive inside, removeable).
USB info:  1058:0702 Western Digital Technologies, Inc.
Bridge chip by InitIO:  INIC-1606L

Cheers

author
#1 lore raw
Quoted 11 lines · Mark Lord

I believe this is of possible interest to others here:

Most newer USB enclosures now support SCSI STOP/START commands.

But.. the Western Digital 2.5" mobile USB2 enclosures (SATA inside) appear to also support the SCSI-ATA-Command-Passthru protocol. These are the first ones I have seen here that do this.

So, things like "hdparm -I /dev/sdb" work without fuss on an external USB drive when used with these enclosures. As does setting automatic spin-down with "hdparm -S".

..

Quoted 3 lines
Model:  WD-250XMS-00 (with 250GB drive inside, removeable).
USB info:  1058:0702 Western Digital Technologies, Inc.
Bridge chip by InitIO:  INIC-1606L

..

Mmm.. I also have two NexStar-3 2.5" USB/eSata enclosures here, but they are not identical on the inside.

The one with an InitIO INIC-1610L chip does *not* support SAT, but the second one with an InitIO INIC-1611L chip *does* work with SAT!

Good to see these chips getting out there now, as it allows external storage to be spun-down much of the time when only rarely needed -- keeps the drives from cooking the rest of the time.

Cheers