A USB enclosure that supports SCSI-ATA-Passthru (cheap!)
I believe this is of possible interest to others here:
Most newer USB enclosures now support SCSI STOP/START commands.
But.. the Western Digital 2.5" mobile USB2 enclosures (SATA inside) appear to also support the SCSI-ATA-Command-Passthru protocol. These are the first ones I have seen here that do this.
So, things like "hdparm -I /dev/sdb" work without fuss on an external USB drive when used with these enclosures. As does setting automatic spin-down with "hdparm -S".
And as an added bonus, they're rather cheaply priced with drive included.
On the downside, smartctl does not work with the one I have here, complaining thusly:
Quoted 11 lines
$ smartctl -a -T permissive -T permissive /dev/sdb smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/Device: WD 823AS External Version: 1.04
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0Quoted 1 line
Quoted 1 line
Terminate command early due to bad response to IEC mode page
Error Counter logging not supported
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0 Device does not support Self Test logging
Regardless, these devices are commonly available at Costco and other discount retailers. Mine came with a 250GB drive inside, and has model number WS2500XMS-00 on the outside. I hope to pick up another with a 320GB drive soon-ish, and see if it also has passthru.
Model: WD-250XMS-00 (with 250GB drive inside, removeable). USB info: 1058:0702 Western Digital Technologies, Inc. Bridge chip by InitIO: INIC-1606L
Cheers
Quoted 11 lines · Mark Lord
I believe this is of possible interest to others here:
Most newer USB enclosures now support SCSI STOP/START commands.
But.. the Western Digital 2.5" mobile USB2 enclosures (SATA inside) appear to also support the SCSI-ATA-Command-Passthru protocol. These are the first ones I have seen here that do this.
So, things like "hdparm -I
/dev/sdb" work without fuss on an external USB drive when used with these enclosures. As does setting automatic spin-down with "hdparm -S".
..
Quoted 3 lines
Model: WD-250XMS-00 (with 250GB drive inside, removeable). USB info: 1058:0702 Western Digital Technologies, Inc. Bridge chip by InitIO: INIC-1606L
..
Mmm.. I also have two NexStar-3 2.5" USB/eSata enclosures here, but they are not identical on the inside.
The one with an InitIO INIC-1610L chip does *not* support SAT, but the second one with an InitIO INIC-1611L chip *does* work with SAT!
Good to see these chips getting out there now, as it allows external storage to be spun-down much of the time when only rarely needed -- keeps the drives from cooking the rest of the time.
Cheers