drm/ast: Transparently handle BMC in outputs
Subsystems (3)
Thomas Zimmermann
maintainercover drm/ast: Transparently handle BMC in outputs
Add transparent BMC support to all outputs. If the user disconnects the physical display, each output will now return display modes for the BMC. Makes the BMC connector obsolete, so remove it.
The benefit of the new approach is that is works with any userspace. Most userspace compositors have problems configuring the current BMC connector. The BMC connector is now gone and only a physical connector is present.
Also clean up some of the EDID handling in preparation. Switching to struct drm_edid and its helpers simplifies the code for inclusion of the BMC support.
A similar approach has been taken for mgag200. [1] Here a server's display hardware also contains an internal BMC that needs to display even without the presence of a physical display.
[1] https://patchwork.freedesktop.org/series/136885/
Thomas Zimmermann (9):
drm/ast: Move code for physical outputs into separate files drm/ast: astdp: Move locking into EDID helper drm/ast: astdp: Use struct drm_edid and helpers drm/ast: astdp: Transparently handle BMC support drm/ast: dp501: Use struct drm_edid and helpers drm/ast: dp501: Transparently handle BMC support drm/ast: sil164: Transparently handle BMC support drm/ast: vga: Transparently handle BMC support drm/ast: Remove BMC output
drivers/gpu/drm/ast/Makefile | 4 +- drivers/gpu/drm/ast/ast_dp.c | 242 ++++++++++++- drivers/gpu/drm/ast/ast_dp501.c | 212 ++++++++++-- drivers/gpu/drm/ast/ast_drv.h | 21 +- drivers/gpu/drm/ast/ast_mode.c | 578 ------------------------------- drivers/gpu/drm/ast/ast_sil164.c | 124 +++++++ drivers/gpu/drm/ast/ast_vga.c | 124 +++++++ 7 files changed, 678 insertions(+), 627 deletions(-) create mode 100644 drivers/gpu/drm/ast/ast_sil164.c create mode 100644 drivers/gpu/drm/ast/ast_vga.c
Signature · 1 line
2.46.0
Thomas Zimmermann
maintainerPATCH 1/9 drm/ast: Move code for physical outputs into separate files
Move the modesetting code for the various transmitter chips into their own source files before adding BMC support. No functional changes.
--- drivers/gpu/drm/ast/Makefile | 4 +- drivers/gpu/drm/ast/ast_dp.c | 214 +++++++++++++- drivers/gpu/drm/ast/ast_dp501.c | 141 ++++++++- drivers/gpu/drm/ast/ast_drv.h | 17 +- drivers/gpu/drm/ast/ast_mode.c | 471 ------------------------------- drivers/gpu/drm/ast/ast_sil164.c | 88 ++++++ drivers/gpu/drm/ast/ast_vga.c | 88 ++++++ 7 files changed, 530 insertions(+), 493 deletions(-) create mode 100644 drivers/gpu/drm/ast/ast_sil164.c create mode 100644 drivers/gpu/drm/ast/ast_vga.c
drivers/gpu/drm/ast/Makefile +3 -1
@@ -11,6 +11,8 @@ ast-y := \ ast_main.o \ ast_mm.o \ ast_mode.o \ - ast_post.o + ast_post.o \ + ast_sil164.o \ + ast_vga.o obj-$(CONFIG_DRM_AST) := ast.o
drivers/gpu/drm/ast/ast_dp.c +207 -7
262 lines not on this page · raw message
drivers/gpu/drm/ast/ast_dp501.c +138 -3
168 lines not on this page · raw message
drivers/gpu/drm/ast/ast_drv.h +6 -11
@@ -460,22 +460,17 @@ void ast_post_gpu(struct drm_device *dev);u32 ast_mindwm (struct ast_device *ast,u32 r);void ast_moutdwm (struct ast_device *ast,u32 r,u32 v);void ast_patch_ahb_2500 (void __iomem *regs); + +int ast_vga_output_init (struct ast_device *ast); +int ast_sil164_output_init (struct ast_device *ast); +/* ast dp501 */ -void ast_set_dp501_video_output (struct drm_device *dev,u8 mode);bool ast_backup_fw (struct drm_device *dev,u8 *addr,u32 size); -bool ast_dp501_is_connected (struct ast_device *ast); -bool ast_dp501_read_edid (struct drm_device *dev,u8 *ediddata); -u8 ast_get_dp501_max_clk (struct drm_device *dev);void ast_init_3rdtx (struct drm_device *dev); +int ast_dp501_output_init (struct ast_device *ast);/* aspeed DP */ -bool ast_astdp_is_connected (struct ast_device *ast); -int ast_astdp_read_edid (struct drm_device *dev,u8 *ediddata);int ast_dp_launch (struct ast_device *ast); -bool ast_dp_power_is_on (struct ast_device *ast); -void ast_dp_power_on_off (struct drm_device *dev,bool no); -void ast_dp_link_training (struct ast_device *ast); -void ast_dp_set_on_off (struct drm_device *dev,bool no); -void ast_dp_set_mode (struct drm_crtc *crtc,struct ast_vbios_mode_info *vbios_mode); +int ast_astdp_output_init (struct ast_device *ast);#endif
drivers/gpu/drm/ast/ast_mode.c +0 -471
483 lines not on this page · raw message
drivers/gpu/drm/ast/ast_sil164.c new file +88 -0
88 lines not on this page · raw message
drivers/gpu/drm/ast/ast_vga.c new file +88 -0
88 lines not on this page · raw message
Signature · 1 line
2.46.0
Re: [PATCH 1/9] drm/ast: Move code for physical outputs into separate files
Quoted 3 lines · Thomas Zimmermann
Move the modesetting code for the various transmitter chips into their own source files before adding BMC support. No functional changes.
Thanks, it looks good to me.
Quoted 1,188 lines
Signed-off-by Thomas Zimmermann <[email protected]>--- drivers/gpu/drm/ast/Makefile | 4 +- drivers/gpu/drm/ast/ast_dp.c | 214 +++++++++++++- drivers/gpu/drm/ast/ast_dp501.c | 141 ++++++++- drivers/gpu/drm/ast/ast_drv.h | 17 +- drivers/gpu/drm/ast/ast_mode.c | 471 ------------------------------- drivers/gpu/drm/ast/ast_sil164.c | 88 ++++++ drivers/gpu/drm/ast/ast_vga.c | 88 ++++++ 7 files changed, 530 insertions(+), 493 deletions(-)create mode 100644
drivers/gpu/drm/ast/ast_sil164.ccreate mode 100644drivers/gpu/drm/ast/ast_vga.cdrivers/gpu/drm/ast/Makefile +3
-1@@ -11,6 +11,8 @@ ast-y := \ ast_main.o \ ast_mm.o \ ast_mode.o \ - ast_post.o + ast_post.o \ + ast_sil164.o \ + ast_vga.o obj-$(CONFIG_DRM_AST) := ast.odrivers/gpu/drm/ast/ast_dp.c +207
-7@@ -4,17 +4,23 @@#include <linux/firmware.h> #include <linux/delay.h> + +#include <drm/drm_atomic_state_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_modeset_helper_vtables.h> #include <drm/drm_print.h> +#include <drm/drm_probe_helper.h> +#include "ast_drv.h" -bool ast_astdp_is_connected (struct ast_device *ast) +static bool ast_astdp_is_connected (struct ast_device *ast) {if (!ast_get_index_reg_mask (ast,AST_IO_VGACRI ,0xDF ,AST_IO_VGACRDF_HPD ))return false;return true; } -int ast_astdp_read_edid (struct drm_device *dev,u8 *ediddata) +static int ast_astdp_read_edid (struct drm_device *dev,u8 *ediddata) {struct ast_device *ast =to_ast_device (dev);int ret =0 ;@@ -120,7 +126,7 @@ int ast_dp_launch(struct ast_device *ast)return 0 ; } -bool ast_dp_power_is_on (struct ast_device *ast) +static bool ast_dp_power_is_on (struct ast_device *ast) {u8 vgacre3;@@ -129,7 +135,7 @@ bool ast_dp_power_is_on(struct ast_device *ast)return !(vgacre3 &AST_DP_PHY_SLEEP ); } -void ast_dp_power_on_off (struct drm_device *dev,bool on) +static void ast_dp_power_on_off (struct drm_device *dev,bool on) {struct ast_device *ast =to_ast_device (dev);// Read and Turn off DP PHY sleep @@ -143,7 +149,7 @@ void ast_dp_power_on_off(struct drm_device *dev, bool on)ast_set_index_reg_mask (ast,AST_IO_VGACRI ,0xE3 , (u8 ) ~AST_DP_PHY_SLEEP , bE3); } -void ast_dp_link_training (struct ast_device *ast) +static void ast_dp_link_training (struct ast_device *ast) {struct drm_device *dev = &ast->base;unsigned int i =10 ;@@ -160,7 +166,7 @@ void ast_dp_link_training(struct ast_device *ast)drm_err (dev,"Link training failed\n" ); } -void ast_dp_set_on_off (struct drm_device *dev,bool on) +static void ast_dp_set_on_off (struct drm_device *dev,bool on) {struct ast_device *ast =to_ast_device (dev);u8 video_on_off = on;@@ -179,7 +185,7 @@ void ast_dp_set_on_off(struct drm_device *dev, bool on) } } -void ast_dp_set_mode (struct drm_crtc *crtc,struct ast_vbios_mode_info *vbios_mode) +static void ast_dp_set_mode (struct drm_crtc *crtc,struct ast_vbios_mode_info *vbios_mode) {struct ast_device *ast =to_ast_device (crtc->dev);@@ -252,3 +258,197 @@ void ast_dp_set_mode(struct drm_crtc *crtc, struct ast_vbios_mode_info *vbios_moast_set_index_reg_mask (ast,AST_IO_VGACRI ,0xE1 ,ASTDP_AND_CLEAR_MASK ,ASTDP_MISC1 );ast_set_index_reg_mask (ast,AST_IO_VGACRI ,0xE2 ,ASTDP_AND_CLEAR_MASK , ModeIdx); } + +static void ast_wait_for_vretrace (struct ast_device *ast) +{ +unsigned long timeout = jiffies +HZ ; +u8 vgair1; + +do { + vgair1 =ast_io_read8 (ast,AST_IO_VGAIR1_R ); + }while (!(vgair1 &AST_IO_VGAIR1_VREFRESH ) &&time_before (jiffies, timeout)); +} + +/* +* Encoder +*/ + +static const struct drm_encoder_funcs ast_astdp_encoder_funcs = { + .destroy = drm_encoder_cleanup, +}; + +static void ast_astdp_encoder_helper_atomic_mode_set (struct drm_encoder *encoder, +struct drm_crtc_state *crtc_state, +struct drm_connector_state *conn_state) +{ +struct drm_crtc *crtc = crtc_state->crtc; +struct ast_crtc_state *ast_crtc_state =to_ast_crtc_state (crtc_state); +struct ast_vbios_mode_info *vbios_mode_info = &ast_crtc_state->vbios_mode_info; + +ast_dp_set_mode (crtc, vbios_mode_info); +} + +static void ast_astdp_encoder_helper_atomic_enable (struct drm_encoder *encoder, +struct drm_atomic_state *state) +{ +struct drm_device *dev = encoder->dev; +struct ast_device *ast =to_ast_device (dev); + +ast_dp_power_on_off (dev,AST_DP_POWER_ON ); +ast_dp_link_training (ast); + +ast_wait_for_vretrace (ast); +ast_dp_set_on_off (dev,1 ); +} + +static void ast_astdp_encoder_helper_atomic_disable (struct drm_encoder *encoder, +struct drm_atomic_state *state) +{ +struct drm_device *dev = encoder->dev; + +ast_dp_set_on_off (dev,0 ); +ast_dp_power_on_off (dev,AST_DP_POWER_OFF ); +} + +static const struct drm_encoder_helper_funcs ast_astdp_encoder_helper_funcs = { + .atomic_mode_set = ast_astdp_encoder_helper_atomic_mode_set, + .atomic_enable = ast_astdp_encoder_helper_atomic_enable, + .atomic_disable = ast_astdp_encoder_helper_atomic_disable, +}; + +/* +* Connector +*/ + +static int ast_astdp_connector_helper_get_modes (struct drm_connector *connector) +{ +void *edid; +struct drm_device *dev = connector->dev; +struct ast_device *ast =to_ast_device (dev); + +int succ; +int count; + + edid =kmalloc (EDID_LENGTH ,GFP_KERNEL ); +if (!edid) + goto err_drm_connector_update_edid_property; + +/* +* Protect access to I/O registers from concurrent modesetting +* by acquiring the I/O-register lock. +*/ +mutex_lock (&ast->modeset_lock); + + succ =ast_astdp_read_edid (connector->dev, edid); +if (succ <0 ) + goto err_mutex_unlock; + +mutex_unlock (&ast->modeset_lock); + +drm_connector_update_edid_property (connector, edid); + count =drm_add_edid_modes (connector, edid); +kfree (edid); + +return count; + +err_mutex_unlock: +mutex_unlock (&ast->modeset_lock); +kfree (edid); +err_drm_connector_update_edid_property: +drm_connector_update_edid_property (connector,NULL ); +return 0 ; +} + +static int ast_astdp_connector_helper_detect_ctx (struct drm_connector *connector, +struct drm_modeset_acquire_ctx *ctx, +bool force) +{ +struct drm_device *dev = connector->dev; +struct ast_device *ast =to_ast_device (connector->dev); +enum drm_connector_status status = connector_status_disconnected; +struct drm_connector_state *connector_state = connector->state; +bool is_active = false; + +mutex_lock (&ast->modeset_lock); + +if (connector_state && connector_state->crtc) { +struct drm_crtc_state *crtc_state = connector_state->crtc->state; + +if (crtc_state && crtc_state->active) + is_active = true; + } + +if (!is_active && !ast_dp_power_is_on (ast)) { +ast_dp_power_on_off (dev, true); +msleep (50 ); + } + +if (ast_astdp_is_connected (ast)) + status = connector_status_connected; + +if (!is_active && status == connector_status_disconnected) +ast_dp_power_on_off (dev, false); + +mutex_unlock (&ast->modeset_lock); + +return status; +} + +static const struct drm_connector_helper_funcs ast_astdp_connector_helper_funcs = { + .get_modes = ast_astdp_connector_helper_get_modes, + .detect_ctx = ast_astdp_connector_helper_detect_ctx, +}; + +static const struct drm_connector_funcs ast_astdp_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int ast_astdp_connector_init (struct drm_device *dev,struct drm_connector *connector) +{ +int ret; + + ret =drm_connector_init (dev, connector, &ast_astdp_connector_funcs, + DRM_MODE_CONNECTOR_DisplayPort); +if (ret) +return ret; + +drm_connector_helper_add (connector, &ast_astdp_connector_helper_funcs); + + connector->interlace_allowed =0 ; + connector->doublescan_allowed =0 ; + + connector->polled =DRM_CONNECTOR_POLL_CONNECT |DRM_CONNECTOR_POLL_DISCONNECT ; + +return 0 ; +} + +int ast_astdp_output_init (struct ast_device *ast) +{ +struct drm_device *dev = &ast->base; +struct drm_crtc *crtc = &ast->crtc; +struct drm_encoder *encoder = &ast->output.astdp.encoder; +struct drm_connector *connector = &ast->output.astdp.connector; +int ret; + + ret =drm_encoder_init (dev, encoder, &ast_astdp_encoder_funcs, +DRM_MODE_ENCODER_TMDS ,NULL ); +if (ret) +return ret; +drm_encoder_helper_add (encoder, &ast_astdp_encoder_helper_funcs); + + encoder->possible_crtcs =drm_crtc_mask (crtc); + + ret =ast_astdp_connector_init (dev, connector); +if (ret) +return ret; + + ret =drm_connector_attach_encoder (connector, encoder); +if (ret) +return ret; + +return 0 ; +}drivers/gpu/drm/ast/ast_dp501.c +138
-3@@ -4,6 +4,11 @@#include <linux/firmware.h> #include <linux/module.h> +#include <drm/drm_atomic_state_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_modeset_helper_vtables.h> +#include <drm/drm_probe_helper.h> +#include "ast_drv.h" MODULE_FIRMWARE ("ast_dp501_fw.bin" );@@ -170,7 +175,7 @@ static void clear_cmd(struct ast_device *ast) }#endif -void ast_set_dp501_video_output (struct drm_device *dev,u8 mode) +static void ast_set_dp501_video_output (struct drm_device *dev,u8 mode) {ast_write_cmd (dev,0x40 );ast_write_data (dev, mode);@@ -272,7 +277,7 @@ static bool ast_launch_m68k(struct drm_device *dev)return true; } -bool ast_dp501_is_connected (struct ast_device *ast) +static bool ast_dp501_is_connected (struct ast_device *ast) {u32 boot_address, offset, data;@@ -313,7 +318,7 @@ bool ast_dp501_is_connected(struct ast_device *ast)return true; } -bool ast_dp501_read_edid (struct drm_device *dev,u8 *ediddata) +static bool ast_dp501_read_edid (struct drm_device *dev,u8 *ediddata) {struct ast_device *ast =to_ast_device (dev);u32 i, boot_address, offset, data;@@ -470,3 +475,133 @@ void ast_init_3rdtx(struct drm_device *dev) } } } + +/* +* Encoder +*/ + +static const struct drm_encoder_funcs ast_dp501_encoder_funcs = { + .destroy = drm_encoder_cleanup, +}; + +static void ast_dp501_encoder_helper_atomic_enable (struct drm_encoder *encoder, +struct drm_atomic_state *state) +{ +struct drm_device *dev = encoder->dev; + +ast_set_dp501_video_output (dev,1 ); +} + +static void ast_dp501_encoder_helper_atomic_disable (struct drm_encoder *encoder, +struct drm_atomic_state *state) +{ +struct drm_device *dev = encoder->dev; + +ast_set_dp501_video_output (dev,0 ); +} + +static const struct drm_encoder_helper_funcs ast_dp501_encoder_helper_funcs = { + .atomic_enable = ast_dp501_encoder_helper_atomic_enable, + .atomic_disable = ast_dp501_encoder_helper_atomic_disable, +}; + +/* +* Connector +*/ + +static int ast_dp501_connector_helper_get_modes (struct drm_connector *connector) +{ +void *edid; +bool succ; +int count; + + edid =kmalloc (EDID_LENGTH ,GFP_KERNEL ); +if (!edid) + goto err_drm_connector_update_edid_property; + + succ =ast_dp501_read_edid (connector->dev, edid); +if (!succ) + goto err_kfree; + +drm_connector_update_edid_property (connector, edid); + count =drm_add_edid_modes (connector, edid); +kfree (edid); + +return count; + +err_kfree: +kfree (edid); +err_drm_connector_update_edid_property: +drm_connector_update_edid_property (connector,NULL ); +return 0 ; +} + +static int ast_dp501_connector_helper_detect_ctx (struct drm_connector *connector, +struct drm_modeset_acquire_ctx *ctx, +bool force) +{ +struct ast_device *ast =to_ast_device (connector->dev); + +if (ast_dp501_is_connected (ast)) +return connector_status_connected; +return connector_status_disconnected; +} + +static const struct drm_connector_helper_funcs ast_dp501_connector_helper_funcs = { + .get_modes = ast_dp501_connector_helper_get_modes, + .detect_ctx = ast_dp501_connector_helper_detect_ctx, +}; + +static const struct drm_connector_funcs ast_dp501_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int ast_dp501_connector_init (struct drm_device *dev,struct drm_connector *connector) +{ +int ret; + + ret =drm_connector_init (dev, connector, &ast_dp501_connector_funcs, + DRM_MODE_CONNECTOR_DisplayPort); +if (ret) +return ret; + +drm_connector_helper_add (connector, &ast_dp501_connector_helper_funcs); + + connector->interlace_allowed =0 ; + connector->doublescan_allowed =0 ; + + connector->polled =DRM_CONNECTOR_POLL_CONNECT |DRM_CONNECTOR_POLL_DISCONNECT ; + +return 0 ; +} + +int ast_dp501_output_init (struct ast_device *ast) +{ +struct drm_device *dev = &ast->base; +struct drm_crtc *crtc = &ast->crtc; +struct drm_encoder *encoder = &ast->output.dp501.encoder; +struct drm_connector *connector = &ast->output.dp501.connector; +int ret; + + ret =drm_encoder_init (dev, encoder, &ast_dp501_encoder_funcs, +DRM_MODE_ENCODER_TMDS ,NULL ); +if (ret) +return ret; +drm_encoder_helper_add (encoder, &ast_dp501_encoder_helper_funcs); + + encoder->possible_crtcs =drm_crtc_mask (crtc); + + ret =ast_dp501_connector_init (dev, connector); +if (ret) +return ret; + + ret =drm_connector_attach_encoder (connector, encoder); +if (ret) +return ret; + +return 0 ; +}drivers/gpu/drm/ast/ast_drv.h +6
-11@@ -460,22 +460,17 @@ void ast_post_gpu(struct drm_device *dev);u32 ast_mindwm (struct ast_device *ast,u32 r);void ast_moutdwm (struct ast_device *ast,u32 r,u32 v);void ast_patch_ahb_2500 (void __iomem *regs); + +int ast_vga_output_init (struct ast_device *ast); +int ast_sil164_output_init (struct ast_device *ast); +/* ast dp501 */ -void ast_set_dp501_video_output (struct drm_device *dev,u8 mode);bool ast_backup_fw (struct drm_device *dev,u8 *addr,u32 size); -bool ast_dp501_is_connected (struct ast_device *ast); -bool ast_dp501_read_edid (struct drm_device *dev,u8 *ediddata); -u8 ast_get_dp501_max_clk (struct drm_device *dev);void ast_init_3rdtx (struct drm_device *dev); +int ast_dp501_output_init (struct ast_device *ast);/* aspeed DP */ -bool ast_astdp_is_connected (struct ast_device *ast); -int ast_astdp_read_edid (struct drm_device *dev,u8 *ediddata);int ast_dp_launch (struct ast_device *ast); -bool ast_dp_power_is_on (struct ast_device *ast); -void ast_dp_power_on_off (struct drm_device *dev,bool no); -void ast_dp_link_training (struct ast_device *ast); -void ast_dp_set_on_off (struct drm_device *dev,bool no); -void ast_dp_set_mode (struct drm_crtc *crtc,struct ast_vbios_mode_info *vbios_mode); +int ast_astdp_output_init (struct ast_device *ast);#endif drivers/gpu/drm/ast/ast_mode.c +0
-471@@ -47,7 +47,6 @@#include <drm/drm_panic.h> #include <drm/drm_probe_helper.h> -#include "ast_ddc.h" #include "ast_drv.h" #include "ast_tables.h" @@ -1310,476 +1309,6 @@ static int ast_crtc_init(struct drm_device *dev)return 0 ; } -/* -* VGA Encoder -*/ - -static const struct drm_encoder_funcs ast_vga_encoder_funcs = { - .destroy = drm_encoder_cleanup, -}; - -/* -* VGA Connector -*/ - -static const struct drm_connector_helper_funcs ast_vga_connector_helper_funcs = { - .get_modes = drm_connector_helper_get_modes, - .detect_ctx = drm_connector_helper_detect_from_ddc, -}; - -static const struct drm_connector_funcs ast_vga_connector_funcs = { - .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = drm_connector_cleanup, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static int ast_vga_connector_init (struct drm_device *dev,struct drm_connector *connector) -{ -struct ast_device *ast =to_ast_device (dev); -struct i2c_adapter *ddc; -int ret; - - ddc =ast_ddc_create (ast); -if (IS_ERR (ddc)) { - ret =PTR_ERR (ddc); -drm_err (dev,"failed to add DDC bus for connector; ret=%d\n" , ret); -return ret; - } - - ret =drm_connector_init_with_ddc (dev, connector, &ast_vga_connector_funcs, -DRM_MODE_CONNECTOR_VGA , ddc); -if (ret) -return ret; - -drm_connector_helper_add (connector, &ast_vga_connector_helper_funcs); - - connector->interlace_allowed =0 ; - connector->doublescan_allowed =0 ; - - connector->polled =DRM_CONNECTOR_POLL_CONNECT |DRM_CONNECTOR_POLL_DISCONNECT ; - -return 0 ; -} - -static int ast_vga_output_init (struct ast_device *ast) -{ -struct drm_device *dev = &ast->base; -struct drm_crtc *crtc = &ast->crtc; -struct drm_encoder *encoder = &ast->output.vga.encoder; -struct drm_connector *connector = &ast->output.vga.connector; -int ret; - - ret =drm_encoder_init (dev, encoder, &ast_vga_encoder_funcs, -DRM_MODE_ENCODER_DAC ,NULL ); -if (ret) -return ret; - encoder->possible_crtcs =drm_crtc_mask (crtc); - - ret =ast_vga_connector_init (dev, connector); -if (ret) -return ret; - - ret =drm_connector_attach_encoder (connector, encoder); -if (ret) -return ret; - -return 0 ; -} - -/* -* SIL164 Encoder -*/ - -static const struct drm_encoder_funcs ast_sil164_encoder_funcs = { - .destroy = drm_encoder_cleanup, -}; - -/* -* SIL164 Connector -*/ - -static const struct drm_connector_helper_funcs ast_sil164_connector_helper_funcs = { - .get_modes = drm_connector_helper_get_modes, - .detect_ctx = drm_connector_helper_detect_from_ddc, -}; - -static const struct drm_connector_funcs ast_sil164_connector_funcs = { - .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = drm_connector_cleanup, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static int ast_sil164_connector_init (struct drm_device *dev,struct drm_connector *connector) -{ -struct ast_device *ast =to_ast_device (dev); -struct i2c_adapter *ddc; -int ret; - - ddc =ast_ddc_create (ast); -if (IS_ERR (ddc)) { - ret =PTR_ERR (ddc); -drm_err (dev,"failed to add DDC bus for connector; ret=%d\n" , ret); -return ret; - } - - ret =drm_connector_init_with_ddc (dev, connector, &ast_sil164_connector_funcs, -DRM_MODE_CONNECTOR_DVII , ddc); -if (ret) -return ret; - -drm_connector_helper_add (connector, &ast_sil164_connector_helper_funcs); - - connector->interlace_allowed =0 ; - connector->doublescan_allowed =0 ; - - connector->polled =DRM_CONNECTOR_POLL_CONNECT |DRM_CONNECTOR_POLL_DISCONNECT ; - -return 0 ; -} - -static int ast_sil164_output_init (struct ast_device *ast) -{ -struct drm_device *dev = &ast->base; -struct drm_crtc *crtc = &ast->crtc; -struct drm_encoder *encoder = &ast->output.sil164.encoder; -struct drm_connector *connector = &ast->output.sil164.connector; -int ret; - - ret =drm_encoder_init (dev, encoder, &ast_sil164_encoder_funcs, -DRM_MODE_ENCODER_TMDS ,NULL ); -if (ret) -return ret; - encoder->possible_crtcs =drm_crtc_mask (crtc); - - ret =ast_sil164_connector_init (dev, connector); -if (ret) -return ret; - - ret =drm_connector_attach_encoder (connector, encoder); -if (ret) -return ret; - -return 0 ; -} - -/* -* DP501 Encoder -*/ - -static const struct drm_encoder_funcs ast_dp501_encoder_funcs = { - .destroy = drm_encoder_cleanup, -}; - -static void ast_dp501_encoder_helper_atomic_enable (struct drm_encoder *encoder, -struct drm_atomic_state *state) -{ -struct drm_device *dev = encoder->dev; - -ast_set_dp501_video_output (dev,1 ); -} - -static void ast_dp501_encoder_helper_atomic_disable (struct drm_encoder *encoder, -struct drm_atomic_state *state) -{ -struct drm_device *dev = encoder->dev; - -ast_set_dp501_video_output (dev,0 ); -} - -static const struct drm_encoder_helper_funcs ast_dp501_encoder_helper_funcs = { - .atomic_enable = ast_dp501_encoder_helper_atomic_enable, - .atomic_disable = ast_dp501_encoder_helper_atomic_disable, -}; - -/* -* DP501 Connector -*/ - -static int ast_dp501_connector_helper_get_modes (struct drm_connector *connector) -{ -void *edid; -bool succ; -int count; - - edid =kmalloc (EDID_LENGTH ,GFP_KERNEL ); -if (!edid) - goto err_drm_connector_update_edid_property; - - succ =ast_dp501_read_edid (connector->dev, edid); -if (!succ) - goto err_kfree; - -drm_connector_update_edid_property (connector, edid); - count =drm_add_edid_modes (connector, edid); -kfree (edid); - -return count; - -err_kfree: -kfree (edid); -err_drm_connector_update_edid_property: -drm_connector_update_edid_property (connector,NULL ); -return 0 ; -} - -static int ast_dp501_connector_helper_detect_ctx (struct drm_connector *connector, -struct drm_modeset_acquire_ctx *ctx, -bool force) -{ -struct ast_device *ast =to_ast_device (connector->dev); - -if (ast_dp501_is_connected (ast)) -return connector_status_connected; -return connector_status_disconnected; -} - -static const struct drm_connector_helper_funcs ast_dp501_connector_helper_funcs = { - .get_modes = ast_dp501_connector_helper_get_modes, - .detect_ctx = ast_dp501_connector_helper_detect_ctx, -}; - -static const struct drm_connector_funcs ast_dp501_connector_funcs = { - .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = drm_connector_cleanup, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static int ast_dp501_connector_init (struct drm_device *dev,struct drm_connector *connector) -{ -int ret; - - ret =drm_connector_init (dev, connector, &ast_dp501_connector_funcs, - DRM_MODE_CONNECTOR_DisplayPort); -if (ret) -return ret; - -drm_connector_helper_add (connector, &ast_dp501_connector_helper_funcs); - - connector->interlace_allowed =0 ; - connector->doublescan_allowed =0 ; - - connector->polled =DRM_CONNECTOR_POLL_CONNECT |DRM_CONNECTOR_POLL_DISCONNECT ; - -return 0 ; -} - -static int ast_dp501_output_init (struct ast_device *ast) -{ -struct drm_device *dev = &ast->base; -struct drm_crtc *crtc = &ast->crtc; -struct drm_encoder *encoder = &ast->output.dp501.encoder; -struct drm_connector *connector = &ast->output.dp501.connector; -int ret; - - ret =drm_encoder_init (dev, encoder, &ast_dp501_encoder_funcs, -DRM_MODE_ENCODER_TMDS ,NULL ); -if (ret) -return ret; -drm_encoder_helper_add (encoder, &ast_dp501_encoder_helper_funcs); - - encoder->possible_crtcs =drm_crtc_mask (crtc); - - ret =ast_dp501_connector_init (dev, connector); -if (ret) -return ret; - - ret =drm_connector_attach_encoder (connector, encoder); -if (ret) -return ret; - -return 0 ; -} - -/* -* ASPEED Display-Port Encoder -*/ - -static const struct drm_encoder_funcs ast_astdp_encoder_funcs = { - .destroy = drm_encoder_cleanup, -}; - -static void ast_astdp_encoder_helper_atomic_mode_set (struct drm_encoder *encoder, -struct drm_crtc_state *crtc_state, -struct drm_connector_state *conn_state) -{ -struct drm_crtc *crtc = crtc_state->crtc; -struct ast_crtc_state *ast_crtc_state =to_ast_crtc_state (crtc_state); -struct ast_vbios_mode_info *vbios_mode_info = &ast_crtc_state->vbios_mode_info; - -ast_dp_set_mode (crtc, vbios_mode_info); -} - -static void ast_astdp_encoder_helper_atomic_enable (struct drm_encoder *encoder, -struct drm_atomic_state *state) -{ -struct drm_device *dev = encoder->dev; -struct ast_device *ast =to_ast_device (dev); - -ast_dp_power_on_off (dev,AST_DP_POWER_ON ); -ast_dp_link_training (ast); - -ast_wait_for_vretrace (ast); -ast_dp_set_on_off (dev,1 ); -} - -static void ast_astdp_encoder_helper_atomic_disable (struct drm_encoder *encoder, -struct drm_atomic_state *state) -{ -struct drm_device *dev = encoder->dev; - -ast_dp_set_on_off (dev,0 ); -ast_dp_power_on_off (dev,AST_DP_POWER_OFF ); -} - -static const struct drm_encoder_helper_funcs ast_astdp_encoder_helper_funcs = { - .atomic_mode_set = ast_astdp_encoder_helper_atomic_mode_set, - .atomic_enable = ast_astdp_encoder_helper_atomic_enable, - .atomic_disable = ast_astdp_encoder_helper_atomic_disable, -}; - -/* -* ASPEED Display-Port Connector -*/ - -static int ast_astdp_connector_helper_get_modes (struct drm_connector *connector) -{ -void *edid; -struct drm_device *dev = connector->dev; -struct ast_device *ast =to_ast_device (dev); - -int succ; -int count; - - edid =kmalloc (EDID_LENGTH ,GFP_KERNEL ); -if (!edid) - goto err_drm_connector_update_edid_property; - -/* -* Protect access to I/O registers from concurrent modesetting -* by acquiring the I/O-register lock. -*/ -mutex_lock (&ast->modeset_lock); - - succ =ast_astdp_read_edid (connector->dev, edid); -if (succ <0 ) - goto err_mutex_unlock; - -mutex_unlock (&ast->modeset_lock); - -drm_connector_update_edid_property (connector, edid); - count =drm_add_edid_modes (connector, edid); -kfree (edid); - -return count; - -err_mutex_unlock: -mutex_unlock (&ast->modeset_lock); -kfree (edid); -err_drm_connector_update_edid_property: -drm_connector_update_edid_property (connector,NULL ); -return 0 ; -} - -static int ast_astdp_connector_helper_detect_ctx (struct drm_connector *connector, -struct drm_modeset_acquire_ctx *ctx, -bool force) -{ -struct drm_device *dev = connector->dev; -struct ast_device *ast =to_ast_device (connector->dev); -enum drm_connector_status status = connector_status_disconnected; -struct drm_connector_state *connector_state = connector->state; -bool is_active = false; - -mutex_lock (&ast->modeset_lock); - -if (connector_state && connector_state->crtc) { -struct drm_crtc_state *crtc_state = connector_state->crtc->state; - -if (crtc_state && crtc_state->active) - is_active = true; - } - -if (!is_active && !ast_dp_power_is_on (ast)) { -ast_dp_power_on_off (dev, true); -msleep (50 ); - } - -if (ast_astdp_is_connected (ast)) - status = connector_status_connected; - -if (!is_active && status == connector_status_disconnected) -ast_dp_power_on_off (dev, false); - -mutex_unlock (&ast->modeset_lock); - -return status; -} - -static const struct drm_connector_helper_funcs ast_astdp_connector_helper_funcs = { - .get_modes = ast_astdp_connector_helper_get_modes, - .detect_ctx = ast_astdp_connector_helper_detect_ctx, -}; - -static const struct drm_connector_funcs ast_astdp_connector_funcs = { - .reset = drm_atomic_helper_connector_reset, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = drm_connector_cleanup, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static int ast_astdp_connector_init (struct drm_device *dev,struct drm_connector *connector) -{ -int ret; - - ret =drm_connector_init (dev, connector, &ast_astdp_connector_funcs, - DRM_MODE_CONNECTOR_DisplayPort); -if (ret) -return ret; - -drm_connector_helper_add (connector, &ast_astdp_connector_helper_funcs); - - connector->interlace_allowed =0 ; - connector->doublescan_allowed =0 ; - - connector->polled =DRM_CONNECTOR_POLL_CONNECT |DRM_CONNECTOR_POLL_DISCONNECT ; - -return 0 ; -} - -static int ast_astdp_output_init (struct ast_device *ast) -{ -struct drm_device *dev = &ast->base; -struct drm_crtc *crtc = &ast->crtc; -struct drm_encoder *encoder = &ast->output.astdp.encoder; -struct drm_connector *connector = &ast->output.astdp.connector; -int ret; - - ret =drm_encoder_init (dev, encoder, &ast_astdp_encoder_funcs, -DRM_MODE_ENCODER_TMDS ,NULL ); -if (ret) -return ret; -drm_encoder_helper_add (encoder, &ast_astdp_encoder_helper_funcs); - - encoder->possible_crtcs =drm_crtc_mask (crtc); - - ret =ast_astdp_connector_init (dev, connector); -if (ret) -return ret; - - ret =drm_connector_attach_encoder (connector, encoder); -if (ret) -return ret; - -return 0 ; -} -/* * BMC virtual Connector */ drivers/gpu/drm/ast/ast_sil164.c new file +88
-0@@ -0,0 +1,88 @@ +// SPDX-License-Identifier: MIT + +#include <drm/drm_atomic_state_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_modeset_helper_vtables.h> +#include <drm/drm_print.h> +#include <drm/drm_probe_helper.h> + +#include "ast_ddc.h" +#include "ast_drv.h" + +/* +* Encoder +*/ + +static const struct drm_encoder_funcs ast_sil164_encoder_funcs = { + .destroy = drm_encoder_cleanup, +}; + +/* +* Connector +*/ + +static const struct drm_connector_helper_funcs ast_sil164_connector_helper_funcs = { + .get_modes = drm_connector_helper_get_modes, + .detect_ctx = drm_connector_helper_detect_from_ddc, +}; + +static const struct drm_connector_funcs ast_sil164_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int ast_sil164_connector_init (struct drm_device *dev,struct drm_connector *connector) +{ +struct ast_device *ast =to_ast_device (dev); +struct i2c_adapter *ddc; +int ret; + + ddc =ast_ddc_create (ast); +if (IS_ERR (ddc)) { + ret =PTR_ERR (ddc); +drm_err (dev,"failed to add DDC bus for connector; ret=%d\n" , ret); +return ret; + } + + ret =drm_connector_init_with_ddc (dev, connector, &ast_sil164_connector_funcs, +DRM_MODE_CONNECTOR_DVII , ddc); +if (ret) +return ret; + +drm_connector_helper_add (connector, &ast_sil164_connector_helper_funcs); + + connector->interlace_allowed =0 ; + connector->doublescan_allowed =0 ; + + connector->polled =DRM_CONNECTOR_POLL_CONNECT |DRM_CONNECTOR_POLL_DISCONNECT ; + +return 0 ; +} + +int ast_sil164_output_init (struct ast_device *ast) +{ +struct drm_device *dev = &ast->base; +struct drm_crtc *crtc = &ast->crtc; +struct drm_encoder *encoder = &ast->output.sil164.encoder; +struct drm_connector *connector = &ast->output.sil164.connector; +int ret; + + ret =drm_encoder_init (dev, encoder, &ast_sil164_encoder_funcs, +DRM_MODE_ENCODER_TMDS ,NULL ); +if (ret) +return ret; + encoder->possible_crtcs =drm_crtc_mask (crtc); + + ret =ast_sil164_connector_init (dev, connector); +if (ret) +return ret; + + ret =drm_connector_attach_encoder (connector, encoder); +if (ret) +return ret; + +return 0 ; +}drivers/gpu/drm/ast/ast_vga.c new file +88
-0@@ -0,0 +1,88 @@ +// SPDX-License-Identifier: MIT + +#include <drm/drm_atomic_state_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_modeset_helper_vtables.h> +#include <drm/drm_print.h> +#include <drm/drm_probe_helper.h> + +#include "ast_ddc.h" +#include "ast_drv.h" + +/* +* Encoder +*/ + +static const struct drm_encoder_funcs ast_vga_encoder_funcs = { + .destroy = drm_encoder_cleanup, +}; + +/* +* Connector +*/ + +static const struct drm_connector_helper_funcs ast_vga_connector_helper_funcs = { + .get_modes = drm_connector_helper_get_modes, + .detect_ctx = drm_connector_helper_detect_from_ddc, +}; + +static const struct drm_connector_funcs ast_vga_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int ast_vga_connector_init (struct drm_device *dev,struct drm_connector *connector) +{ +struct ast_device *ast =to_ast_device (dev); +struct i2c_adapter *ddc; +int ret; + + ddc =ast_ddc_create (ast); +if (IS_ERR (ddc)) { + ret =PTR_ERR (ddc); +drm_err (dev,"failed to add DDC bus for connector; ret=%d\n" , ret); +return ret; + } + + ret =drm_connector_init_with_ddc (dev, connector, &ast_vga_connector_funcs, +DRM_MODE_CONNECTOR_VGA , ddc); +if (ret) +return ret; + +drm_connector_helper_add (connector, &ast_vga_connector_helper_funcs); + + connector->interlace_allowed =0 ; + connector->doublescan_allowed =0 ; + + connector->polled =DRM_CONNECTOR_POLL_CONNECT |DRM_CONNECTOR_POLL_DISCONNECT ; + +return 0 ; +} + +int ast_vga_output_init (struct ast_device *ast) +{ +struct drm_device *dev = &ast->base; +struct drm_crtc *crtc = &ast->crtc; +struct drm_encoder *encoder = &ast->output.vga.encoder; +struct drm_connector *connector = &ast->output.vga.connector; +int ret; + + ret =drm_encoder_init (dev, encoder, &ast_vga_encoder_funcs, +DRM_MODE_ENCODER_DAC ,NULL ); +if (ret) +return ret; + encoder->possible_crtcs =drm_crtc_mask (crtc); + + ret =ast_vga_connector_init (dev, connector); +if (ret) +return ret; + + ret =drm_connector_attach_encoder (connector, encoder); +if (ret) +return ret; + +return 0 ; +}
Thomas Zimmermann
maintainerPATCH 2/9 drm/ast: astdp: Move locking into EDID helper
In reply to Thomas ZimmermannThe modeset mutex protects EDID retrival from concurrent modeset operations. Acquire the lock in ast_astdp_read_edid(). Prepares the code for conversion to struct drm_edid.
--- drivers/gpu/drm/ast/ast_dp.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-)
drivers/gpu/drm/ast/ast_dp.c +10 -14
@@ -26,6 +26,12 @@ static int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata)int ret =0 ;u8 i; +/* +* Protect access to I/O registers from concurrent modesetting +* by acquiring the I/O-register lock. +*/ +mutex_lock (&ast->modeset_lock); +/* Start reading EDID data */ ast_set_index_reg_mask (ast,AST_IO_VGACRI ,0xe5 , (u8 )~AST_IO_VGACRE5_EDID_READ_DONE ,0x00 );
@@ -95,6 +101,8 @@ static int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata)ast_set_index_reg_mask (ast,AST_IO_VGACRI ,0xe5 , (u8 )~AST_IO_VGACRE5_EDID_READ_DONE ,AST_IO_VGACRE5_EDID_READ_DONE ); +mutex_unlock (&ast->modeset_lock); +return ret; }
@@ -323,9 +331,6 @@ static const struct drm_encoder_helper_funcs ast_astdp_encoder_helper_funcs = {static int ast_astdp_connector_helper_get_modes (struct drm_connector *connector) {void *edid; -struct drm_device *dev = connector->dev; -struct ast_device *ast =to_ast_device (dev); -int succ;int count;
@@ -333,17 +338,9 @@ static int ast_astdp_connector_helper_get_modes(struct drm_connector *connector)if (!edid) goto err_drm_connector_update_edid_property; -/* -* Protect access to I/O registers from concurrent modesetting -* by acquiring the I/O-register lock. -*/ -mutex_lock (&ast->modeset_lock); - succ =ast_astdp_read_edid (connector->dev, edid);if (succ <0 ) - goto err_mutex_unlock; - -mutex_unlock (&ast->modeset_lock); + goto err_kfree;drm_connector_update_edid_property (connector, edid); count =drm_add_edid_modes (connector, edid);
@@ -351,8 +348,7 @@ static int ast_astdp_connector_helper_get_modes(struct drm_connector *connector)return count; -err_mutex_unlock: -mutex_unlock (&ast->modeset_lock); +err_kfree:kfree (edid); err_drm_connector_update_edid_property:drm_connector_update_edid_property (connector,NULL );
Signature · 1 line
2.46.0
Re: [PATCH 2/9] drm/ast: astdp: Move locking into EDID helper
Quoted 3 lines · Thomas Zimmermann
The modeset mutex protects EDID retrival from concurrent modeset operations. Acquire the lock in
ast_astdp_read_edid(). Prepares the code for conversion to structdrm_edid.
Thanks, it looks good to me.
Quoted 71 lines
Signed-off-by Thomas Zimmermann <[email protected]>--- drivers/gpu/drm/ast/ast_dp.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-)drivers/gpu/drm/ast/ast_dp.c +10
-14@@ -26,6 +26,12 @@ static int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata)int ret =0 ;u8 i; +/* +* Protect access to I/O registers from concurrent modesetting +* by acquiring the I/O-register lock. +*/ +mutex_lock (&ast->modeset_lock); +/* Start reading EDID data */ ast_set_index_reg_mask (ast,AST_IO_VGACRI ,0xe5 , (u8 )~AST_IO_VGACRE5_EDID_READ_DONE ,0x00 );@@ -95,6 +101,8 @@ static int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata)ast_set_index_reg_mask (ast,AST_IO_VGACRI ,0xe5 , (u8 )~AST_IO_VGACRE5_EDID_READ_DONE ,AST_IO_VGACRE5_EDID_READ_DONE ); +mutex_unlock (&ast->modeset_lock); +return ret; }@@ -323,9 +331,6 @@ static const struct drm_encoder_helper_funcs ast_astdp_encoder_helper_funcs = {static int ast_astdp_connector_helper_get_modes (struct drm_connector *connector) {void *edid; -struct drm_device *dev = connector->dev; -struct ast_device *ast =to_ast_device (dev); -int succ;int count;@@ -333,17 +338,9 @@ static int ast_astdp_connector_helper_get_modes(struct drm_connector *connector)if (!edid) goto err_drm_connector_update_edid_property; -/* -* Protect access to I/O registers from concurrent modesetting -* by acquiring the I/O-register lock. -*/ -mutex_lock (&ast->modeset_lock); - succ =ast_astdp_read_edid (connector->dev, edid);if (succ <0 ) - goto err_mutex_unlock; - -mutex_unlock (&ast->modeset_lock); + goto err_kfree;drm_connector_update_edid_property (connector, edid); count =drm_add_edid_modes (connector, edid);@@ -351,8 +348,7 @@ static int ast_astdp_connector_helper_get_modes(struct drm_connector *connector)return count; -err_mutex_unlock: -mutex_unlock (&ast->modeset_lock); +err_kfree:kfree (edid); err_drm_connector_update_edid_property:drm_connector_update_edid_property (connector,NULL );
Thomas Zimmermann
maintainerPATCH 3/9 drm/ast: astdp: Use struct drm_edid and helpers
In reply to Thomas ZimmermannConvert ASTDP support to struct drm_edid and its helpers. Simplifies and modernizes the EDID handling.
The driver reads 4 bytes at once, but the overall read length is now variable. Therefore update the EDID read loop to never return more than the requested bytes.
The device does not seem to support EDID extensions, as the driver actively clears any such information from the main EDID header. As the new interface allows for reading extension blocks for EDID, make sure that the block is always 0 (i.e., the main header). A later update might fix that.
--- drivers/gpu/drm/ast/ast_dp.c | 55 +++++++++++++++++++----------------- 1 file changed, 29 insertions(+), 26 deletions(-)
drivers/gpu/drm/ast/ast_dp.c +29 -26
@@ -20,11 +20,14 @@ static bool ast_astdp_is_connected(struct ast_device *ast)return true; } -static int ast_astdp_read_edid (struct drm_device *dev,u8 *ediddata) +static int ast_astdp_read_edid_block (void *data,u8 *buf,unsigned int block,size_t len) { -struct ast_device *ast =to_ast_device (dev); +struct ast_device *ast = data;int ret =0 ; -u8 i; +unsigned int i; + +if (block >0 ) +return -EIO ;/* extension headers not supported */ /* * Protect access to I/O registers from concurrent modesetting
@@ -35,13 +38,23 @@ static int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata)/* Start reading EDID data */ ast_set_index_reg_mask (ast,AST_IO_VGACRI ,0xe5 , (u8 )~AST_IO_VGACRE5_EDID_READ_DONE ,0x00 ); -for (i =0 ; i <32 ; i++) { +for (i =0 ; i < len; i +=4 ) { +unsigned int offset;unsigned int j; +u8 ediddata[4 ]; +u8 vgacre4; + + offset = (i + block *EDID_LENGTH ) /4 ; +if (offset >=64 ) { + ret = -EIO ; + goto out; + } + vgacre4 = offset;/* * CRE4[7:0]: Read-Pointer for EDID (Unit: 4bytes); valid range: 0~64 */ -ast_set_index_reg (ast,AST_IO_VGACRI ,0xe4 , i); +ast_set_index_reg (ast,AST_IO_VGACRI ,0xe4 , vgacre4);/* * CRD7[b0]: valid flag for EDID
@@ -65,7 +78,7 @@ static int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata) vgacrd7 =ast_get_index_reg (ast,AST_IO_VGACRI ,0xd7 );if (vgacrd7 &AST_IO_VGACRD7_EDID_VALID_FLAG ) { vgacrd6 =ast_get_index_reg (ast,AST_IO_VGACRI ,0xd6 ); -if (vgacrd6 == i) +if (vgacrd6 == offset)break ; } }
@@ -93,7 +106,9 @@ static int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata) ediddata[2 ] =0 ; } - ediddata +=4 ; +memcpy (buf, ediddata,min ((len - i),sizeof (ediddata))); + + buf +=4 ; } out:
@@ -330,29 +345,17 @@ static const struct drm_encoder_helper_funcs ast_astdp_encoder_helper_funcs = {static int ast_astdp_connector_helper_get_modes (struct drm_connector *connector) { -void *edid; -int succ; +struct drm_device *dev = connector->dev; +struct ast_device *ast =to_ast_device (dev); +const struct drm_edid *drm_edid;int count; - edid =kmalloc (EDID_LENGTH ,GFP_KERNEL ); -if (!edid) - goto err_drm_connector_update_edid_property; - - succ =ast_astdp_read_edid (connector->dev, edid); -if (succ <0 ) - goto err_kfree; - -drm_connector_update_edid_property (connector, edid); - count =drm_add_edid_modes (connector, edid); -kfree (edid); + drm_edid =drm_edid_read_custom (connector, ast_astdp_read_edid_block, ast); +drm_edid_connector_update (connector, drm_edid); + count =drm_edid_connector_add_modes (connector); +drm_edid_free (drm_edid);return count; - -err_kfree: -kfree (edid); -err_drm_connector_update_edid_property: -drm_connector_update_edid_property (connector,NULL ); -return 0 ; } static int ast_astdp_connector_helper_detect_ctx(struct drm_connector *connector,
Signature · 1 line
2.46.0
Thomas Zimmermann
maintainerRe: [PATCH 3/9] drm/ast: astdp: Use struct drm_edid and helpers
Hi
Am 06.08.24 um 14:51 schrieb Thomas Zimmermann:
Quoted 41 lines
Convert ASTDP support to struct
drm_edidand its helpers. Simplifies and modernizes the EDID handling.The driver reads 4 bytes at once, but the overall read length is now variable. Therefore update the EDID read loop to never return more than the requested bytes.
The device does not seem to support EDID extensions, as the driver actively clears any such information from the main EDID header. As the new interface allows for reading extension blocks for EDID, make sure that the block is always 0 (i.e., the main header). A later update might fix that.
Signed-off-by Thomas Zimmermann <[email protected]>--- drivers/gpu/drm/ast/ast_dp.c | 55 +++++++++++++++++++----------------- 1 file changed, 29 insertions(+), 26 deletions(-)drivers/gpu/drm/ast/ast_dp.c +6
-3@@ -20,11 +20,14 @@ static bool ast_astdp_is_connected(struct ast_device *ast)return true; } -static int ast_astdp_read_edid (struct drm_device *dev,u8 *ediddata) +static int ast_astdp_read_edid_block (void *data,u8 *buf,unsigned int block,size_t len) { -struct ast_device *ast =to_ast_device (dev); +struct ast_device *ast = data;int ret =0 ; -u8 i; +unsigned int i; + +if (block >0 ) +return -EIO ;/* extension headers not supported */ /* * Protect access to I/O registers from concurrent modesetting
drivers/gpu/drm/ast/ast_dp.c static int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata) · line 41
Quoted 5 lines
drivers/gpu/drm/ast/ast_dp.c +1
-1@@ -35,13 +38,23 @@ static int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata)/* Start reading EDID data */ ast_set_index_reg_mask (ast,AST_IO_VGACRI ,0xe5 , (u8 )~AST_IO_VGACRE5_EDID_READ_DONE ,0x00 ); -for (i =0 ; i <32 ; i++) { +for (i =0 ; i < len; i +=4 ) {
After reading your review for DP501, I realized that I need to round len up to a multiple of 4.
Best regards
Thomas
Quoted 77 lines
drivers/gpu/drm/ast/ast_dp.c +22
-22+unsigned int offset;unsigned int j; +u8 ediddata[4 ]; +u8 vgacre4; + + offset = (i + block *EDID_LENGTH ) /4 ; +if (offset >=64 ) { + ret = -EIO ; + goto out; + } + vgacre4 = offset;/* * CRE4[7:0]: Read-Pointer for EDID (Unit: 4bytes); valid range: 0~64 */ -ast_set_index_reg (ast,AST_IO_VGACRI ,0xe4 , i); +ast_set_index_reg (ast,AST_IO_VGACRI ,0xe4 , vgacre4);/* * CRD7[b0]: valid flag for EDID @@ -65,7 +78,7 @@ static int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata) vgacrd7 =ast_get_index_reg (ast,AST_IO_VGACRI ,0xd7 );if (vgacrd7 &AST_IO_VGACRD7_EDID_VALID_FLAG ) { vgacrd6 =ast_get_index_reg (ast,AST_IO_VGACRI ,0xd6 ); -if (vgacrd6 == i) +if (vgacrd6 == offset)break ; } }@@ -93,7 +106,9 @@ static int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata) ediddata[2 ] =0 ; } - ediddata +=4 ; +memcpy (buf, ediddata,min ((len - i),sizeof (ediddata))); + + buf +=4 ; } out:@@ -330,29 +345,17 @@ static const struct drm_encoder_helper_funcs ast_astdp_encoder_helper_funcs = {static int ast_astdp_connector_helper_get_modes (struct drm_connector *connector) { -void *edid; -int succ; +struct drm_device *dev = connector->dev; +struct ast_device *ast =to_ast_device (dev); +const struct drm_edid *drm_edid;int count; - edid =kmalloc (EDID_LENGTH ,GFP_KERNEL ); -if (!edid) - goto err_drm_connector_update_edid_property; - - succ =ast_astdp_read_edid (connector->dev, edid); -if (succ <0 ) - goto err_kfree; - -drm_connector_update_edid_property (connector, edid); - count =drm_add_edid_modes (connector, edid); -kfree (edid); + drm_edid =drm_edid_read_custom (connector, ast_astdp_read_edid_block, ast); +drm_edid_connector_update (connector, drm_edid); + count =drm_edid_connector_add_modes (connector); +drm_edid_free (drm_edid);return count; - -err_kfree: -kfree (edid); -err_drm_connector_update_edid_property: -drm_connector_update_edid_property (connector,NULL ); -return 0 ; } static int ast_astdp_connector_helper_detect_ctx(struct drm_connector *connector,
Signature · 7 lines
-- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg)
Thomas Zimmermann
maintainerPATCH 4/9 drm/ast: astdp: Transparently handle BMC support
In reply to Thomas ZimmermannPermanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC.
--- drivers/gpu/drm/ast/ast_dp.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)
drivers/gpu/drm/ast/ast_dp.c +18 -1
@@ -355,6 +355,17 @@ static int ast_astdp_connector_helper_get_modes(struct drm_connector *connector) count =drm_edid_connector_add_modes (connector);drm_edid_free (drm_edid); +if (!count) { +/* +* There's no EDID data without a connected monitor. Set BMC- +* compatible modes in this case. The XGA default resolution +* should work well for all BMCs. +*/ + count =drm_add_modes_noedid (connector,4096 ,4096 ); +if (count) +drm_set_preferred_mode (connector,1024 ,768 ); + } +return count; }
@@ -364,10 +375,14 @@ static int ast_astdp_connector_helper_detect_ctx(struct drm_connector *connector {struct drm_device *dev = connector->dev;struct ast_device *ast =to_ast_device (connector->dev); +enum drm_connector_status old_status = connector_status_disconnected;enum drm_connector_status status = connector_status_disconnected;struct drm_connector_state *connector_state = connector->state;bool is_active = false; +if (connector->edid_blob_ptr) + old_status = connector_status_connected; +mutex_lock (&ast->modeset_lock);if (connector_state && connector_state->crtc) {
@@ -390,7 +405,9 @@ static int ast_astdp_connector_helper_detect_ctx(struct drm_connector *connectormutex_unlock (&ast->modeset_lock); -return status; +if (status != old_status) + ++connector->epoch_counter; +return connector_status_connected; }static const struct drm_connector_helper_funcs ast_astdp_connector_helper_funcs = {
Signature · 1 line
2.46.0
Thomas Zimmermann
maintainerPATCH 5/9 drm/ast: dp501: Use struct drm_edid and helpers
In reply to Thomas ZimmermannConvert DP501 support to struct drm_edid and its helpers. Simplifies and modernizes the EDID handling.
The driver reads 4 bytes at once, but the overall read length is now variable. Therefore update the EDID read loop to never return more than the requested bytes.
--- drivers/gpu/drm/ast/ast_dp501.c | 92 ++++++++++++++++++++------------- 1 file changed, 55 insertions(+), 37 deletions(-)
drivers/gpu/drm/ast/ast_dp501.c +55 -37
@@ -318,32 +318,63 @@ static bool ast_dp501_is_connected(struct ast_device *ast)return true; } -static bool ast_dp501_read_edid (struct drm_device *dev,u8 *ediddata) +static int ast_dp512_read_edid_block (void *data,u8 *buf,unsigned int block,size_t len) { -struct ast_device *ast =to_ast_device (dev); -u32 i, boot_address, offset, data; -u32 *pEDIDidx; +struct ast_device *ast = data; +u32 i, boot_address, offset, ediddata; -if (!ast_dp501_is_connected (ast)) -return false; +if (block > (512 /EDID_LENGTH )) +return -EIO ; + + offset =AST_DP501_EDID_DATA + block *EDID_LENGTH ;if (ast->config_mode == ast_use_p2a) { boot_address =get_fw_base (ast); -/* Read EDID */ - offset =AST_DP501_EDID_DATA ; -for (i =0 ; i <128 ; i +=4 ) { - data =ast_mindwm (ast, boot_address + offset + i); - pEDIDidx = (u32 *)(ediddata + i); - *pEDIDidx = data; +for (i =0 ; i < len; i +=4 ) { + ediddata =ast_mindwm (ast, boot_address + offset + i); + +switch (i %4 ) { +case 3 : + *buf = (ediddata >>24 ) &0xff ; + ++buf; + fallthrough; +case 2 : + *buf = (ediddata >>16 ) &0xff ; + ++buf; + fallthrough; +case 1 : + *buf = (ediddata >>8 ) &0xff ; + ++buf; + fallthrough; +case 0 : + *buf = (ediddata) &0xff ; + ++buf; +break ; + } } }else { -/* Read EDID */ - offset =AST_DP501_EDID_DATA ; -for (i =0 ; i <128 ; i +=4 ) { - data =readl (ast->dp501_fw_buf + offset + i); - pEDIDidx = (u32 *)(ediddata + i); - *pEDIDidx = data; +for (i =0 ; i < len; i +=4 ) { + ediddata =readl (ast->dp501_fw_buf + offset + i); + +switch (i %4 ) { +case 3 : + *buf = (ediddata >>24 ) &0xff ; + ++buf; + fallthrough; +case 2 : + *buf = (ediddata >>16 ) &0xff ; + ++buf; + fallthrough; +case 1 : + *buf = (ediddata >>8 ) &0xff ; + ++buf; + fallthrough; +case 0 : + *buf = (ediddata) &0xff ; + ++buf; +break ; + } } }
@@ -511,29 +542,16 @@ static const struct drm_encoder_helper_funcs ast_dp501_encoder_helper_funcs = {static int ast_dp501_connector_helper_get_modes (struct drm_connector *connector) { -void *edid; -bool succ; +struct ast_device *ast =to_ast_device (connector->dev); +const struct drm_edid *drm_edid;int count; - edid =kmalloc (EDID_LENGTH ,GFP_KERNEL ); -if (!edid) - goto err_drm_connector_update_edid_property; - - succ =ast_dp501_read_edid (connector->dev, edid); -if (!succ) - goto err_kfree; - -drm_connector_update_edid_property (connector, edid); - count =drm_add_edid_modes (connector, edid); -kfree (edid); + drm_edid =drm_edid_read_custom (connector, ast_dp512_read_edid_block, ast); +drm_edid_connector_update (connector, drm_edid); + count =drm_edid_connector_add_modes (connector); +drm_edid_free (drm_edid);return count; - -err_kfree: -kfree (edid); -err_drm_connector_update_edid_property: -drm_connector_update_edid_property (connector,NULL ); -return 0 ; } static int ast_dp501_connector_helper_detect_ctx(struct drm_connector *connector,
Signature · 1 line
2.46.0
Jocelyn Falempe
reviewerRe: [PATCH 5/9] drm/ast: dp501: Use struct drm_edid and helpers
Quoted 6 lines · Thomas Zimmermann
Convert DP501 support to struct
drm_edidand its helpers. Simplifies and modernizes the EDID handling.The driver reads 4 bytes at once, but the overall read length is now variable. Therefore update the EDID read loop to never return more than the requested bytes.
Thanks for this patch.
I don't have a hardware to test, but I think it may break the EDID reading.
Quoted 31 lines
Signed-off-by Thomas Zimmermann <[email protected]>--- drivers/gpu/drm/ast/ast_dp501.c | 92 ++++++++++++++++++++------------- 1 file changed, 55 insertions(+), 37 deletions(-)drivers/gpu/drm/ast/ast_dp501.c +7
-6@@ -318,32 +318,63 @@ static bool ast_dp501_is_connected(struct ast_device *ast)return true; } -static bool ast_dp501_read_edid (struct drm_device *dev,u8 *ediddata) +static int ast_dp512_read_edid_block (void *data,u8 *buf,unsigned int block,size_t len) { -struct ast_device *ast =to_ast_device (dev); -u32 i, boot_address, offset, data; -u32 *pEDIDidx; +struct ast_device *ast = data; +u32 i, boot_address, offset, ediddata; -if (!ast_dp501_is_connected (ast)) -return false; +if (block > (512 /EDID_LENGTH )) +return -EIO ; + + offset =AST_DP501_EDID_DATA + block *EDID_LENGTH ;if (ast->config_mode == ast_use_p2a) {
drivers/gpu/drm/ast/ast_dp501.c static bool ast_dp501_is_connected(struct ast_device *ast) · line 335
Quoted 10 lines
drivers/gpu/drm/ast/ast_dp501.c +2
-6boot_address =get_fw_base (ast); -/* Read EDID */ - offset =AST_DP501_EDID_DATA ; -for (i =0 ; i <128 ; i +=4 ) { - data =ast_mindwm (ast, boot_address + offset + i); - pEDIDidx = (u32 *)(ediddata + i); - *pEDIDidx = data; +for (i =0 ; i < len; i +=4 ) { + ediddata =ast_mindwm (ast, boot_address + offset + i);
I think "i" is always a multiple of 4, so the switch case is broken, and will always go to case 0, so reading only 1 byte every 4 bytes ?
Quoted 87 lines
drivers/gpu/drm/ast/ast_dp501.c +46
-25+ +switch (i %4 ) { +case 3 : + *buf = (ediddata >>24 ) &0xff ; + ++buf; + fallthrough; +case 2 : + *buf = (ediddata >>16 ) &0xff ; + ++buf; + fallthrough; +case 1 : + *buf = (ediddata >>8 ) &0xff ; + ++buf; + fallthrough; +case 0 : + *buf = (ediddata) &0xff ; + ++buf; +break ; + } } }else { -/* Read EDID */ - offset =AST_DP501_EDID_DATA ; -for (i =0 ; i <128 ; i +=4 ) { - data =readl (ast->dp501_fw_buf + offset + i); - pEDIDidx = (u32 *)(ediddata + i); - *pEDIDidx = data; +for (i =0 ; i < len; i +=4 ) { + ediddata =readl (ast->dp501_fw_buf + offset + i); + +switch (i %4 ) { +case 3 : + *buf = (ediddata >>24 ) &0xff ; + ++buf; + fallthrough; +case 2 : + *buf = (ediddata >>16 ) &0xff ; + ++buf; + fallthrough; +case 1 : + *buf = (ediddata >>8 ) &0xff ; + ++buf; + fallthrough; +case 0 : + *buf = (ediddata) &0xff ; + ++buf; +break ; + } } }@@ -511,29 +542,16 @@ static const struct drm_encoder_helper_funcs ast_dp501_encoder_helper_funcs = {static int ast_dp501_connector_helper_get_modes (struct drm_connector *connector) { -void *edid; -bool succ; +struct ast_device *ast =to_ast_device (connector->dev); +const struct drm_edid *drm_edid;int count; - edid =kmalloc (EDID_LENGTH ,GFP_KERNEL ); -if (!edid) - goto err_drm_connector_update_edid_property; - - succ =ast_dp501_read_edid (connector->dev, edid); -if (!succ) - goto err_kfree; - -drm_connector_update_edid_property (connector, edid); - count =drm_add_edid_modes (connector, edid); -kfree (edid); + drm_edid =drm_edid_read_custom (connector, ast_dp512_read_edid_block, ast); +drm_edid_connector_update (connector, drm_edid); + count =drm_edid_connector_add_modes (connector); +drm_edid_free (drm_edid);return count; - -err_kfree: -kfree (edid); -err_drm_connector_update_edid_property: -drm_connector_update_edid_property (connector,NULL ); -return 0 ; } static int ast_dp501_connector_helper_detect_ctx(struct drm_connector *connector,
Thomas Zimmermann
maintainerRe: [PATCH 5/9] drm/ast: dp501: Use struct drm_edid and helpers
Hi
Am 09.08.24 um 13:36 schrieb Jocelyn Falempe:
Quoted 12 lines · Thomas Zimmermann
Quoted 6 lines
Convert DP501 support to struct
drm_edidand its helpers. Simplifies and modernizes the EDID handling.The driver reads 4 bytes at once, but the overall read length is now variable. Therefore update the EDID read loop to never return more than the requested bytes.
Thanks for this patch.
I don't have a hardware to test, but I think it may break the EDID reading.
Unfortunately, I don't have the hardware either and I've not even found something that would use this code.
Quoted 31 lines
Quoted 31 lines
Signed-off-by Thomas Zimmermann <[email protected]>---
drivers/gpu/drm/ast/ast_dp501.c| 92 ++++++++++++++++++++-------------1 file changed, 55 insertions(+), 37 deletions(-)drivers/gpu/drm/ast/ast_dp501.c +7
-4@@ -318,32 +318,63 @@ static bool ast_dp501_is_connected(struct ast_device *ast) return true; } -static bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata) +static int ast_dp512_read_edid_block(void *data, u8 *buf, unsigned int block, size_t len) { - struct ast_device *ast = to_ast_device(dev); - u32 i, boot_address, offset, data; - u32 *pEDIDidx; + struct ast_device *ast = data; + u32 i, boot_address, offset, ediddata; - if (!ast_dp501_is_connected(ast)) - return false; + if (block > (512 / EDID_LENGTH)) + return -EIO; + + offset = AST_DP501_EDID_DATA + block * EDID_LENGTH; if (ast->config_mode == ast_use_p2a) {
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/ast/ast_dp501.c +0
-0boot_address = get_fw_base(ast);- /* Read EDID */
- offset =AST_DP501_EDID_DATA;
- for (i = 0; i < 128; i += 4) {
- data =ast_mindwm(ast, boot_address + offset + i); - pEDIDidx = (u32 *)(ediddata + i);
- *pEDIDidx = data;
+ for (i = 0; i < len; i += 4) {
Here, i need to round up len to a multiple of 4.
Quoted 3 lines
Quoted 1 line
+ ediddata =
ast_mindwm(ast, boot_address + offset + i);I think "i" is always a multiple of 4, so the switch case is broken, and will always go to case 0, so reading only 1 byte every 4 bytes ?
Right, what I want is ((len - i) % 4), so that i get the remaining bytes to read.
Best regards
Thomas
Quoted 85 lines
Quoted 84 lines
+
+ switch (i % 4) {
+ case 3:
+ *buf = (ediddata >> 24) &0xff;
+ ++buf;
+ fallthrough;
+ case 2:
+ *buf = (ediddata >> 16) &0xff;
+ ++buf;
+ fallthrough;
+ case 1:
+ *buf = (ediddata >> 8) &0xff;
+ ++buf;
+ fallthrough;
+ case 0:
+ *buf = (ediddata) &0xff;
+ ++buf;
+ break;
+ }
}
} else {
- /* Read EDID */
- offset =AST_DP501_EDID_DATA;
- for (i = 0; i < 128; i += 4) {
- data =readl(ast->dp501_fw_buf + offset + i);
- pEDIDidx = (u32 *)(ediddata + i);
- *pEDIDidx = data;
+ for (i = 0; i < len; i += 4) {
+ ediddata =readl(ast->dp501_fw_buf + offset + i);
+
+ switch (i % 4) {
+ case 3:
+ *buf = (ediddata >> 24) &0xff;
+ ++buf;
+ fallthrough;
+ case 2:
+ *buf = (ediddata >> 16) &0xff;
+ ++buf;
+ fallthrough;
+ case 1:
+ *buf = (ediddata >> 8) &0xff;
+ ++buf;
+ fallthrough;
+ case 0:
+ *buf = (ediddata) &0xff;
+ ++buf;
+ break;
+ }
}
}
@@ -511,29 +542,16 @@ static const structdrm_encoder_helper_funcsast_dp501_encoder_helper_funcs= { static intast_dp501_connector_helper_get_modes(struct drm_connector *connector)
{
- void *edid;
- bool succ;
+ structast_device*ast =to_ast_device(connector->dev);
+ const structdrm_edid*drm_edid;
int count;
- edid =kmalloc(EDID_LENGTH, GFP_KERNEL);
- if (!edid)
- gotoerr_drm_connector_update_edid_property;drivers/gpu/drm/ast/ast_dp501.c +1
-8- - succ = ast_dp501_read_edid(connector->dev, edid); - if (!succ) - goto err_kfree; - - drm_connector_update_edid_property(connector, edid); - count = drm_add_edid_modes(connector, edid); - kfree(edid); + drm_edid = drm_edid_read_custom(connector,
ast_dp512_read_edid_block, ast);
+drm_edid_connector_update(connector, drm_edid); + count =drm_edid_connector_add_modes(connector); +drm_edid_free(drm_edid);
return count;drivers/gpu/drm/ast/ast_dp501.c +0
-6- -err_kfree: - kfree(edid); -err_drm_connector_update_edid_property: - drm_connector_update_edid_property(connector, NULL); - return 0;}
static int ast_dp501_connector_helper_detect_ctx(structdrm_connector*connector,
Signature · 7 lines
-- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg)
Thomas Zimmermann
maintainerPATCH 6/9 drm/ast: dp501: Transparently handle BMC support
In reply to Thomas ZimmermannPermanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC.
--- drivers/gpu/drm/ast/ast_dp501.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-)
drivers/gpu/drm/ast/ast_dp501.c +21 -2
@@ -551,6 +551,17 @@ static int ast_dp501_connector_helper_get_modes(struct drm_connector *connector) count =drm_edid_connector_add_modes (connector);drm_edid_free (drm_edid); +if (!count) { +/* +* There's no EDID data without a connected monitor. Set BMC- +* compatible modes in this case. The XGA default resolution +* should work well for all BMCs. +*/ + count =drm_add_modes_noedid (connector,4096 ,4096 ); +if (count) +drm_set_preferred_mode (connector,1024 ,768 ); + } +return count; }
@@ -559,10 +570,18 @@ static int ast_dp501_connector_helper_detect_ctx(struct drm_connector *connector bool force) {struct ast_device *ast =to_ast_device (connector->dev); +enum drm_connector_status status = connector_status_disconnected; +enum drm_connector_status old_status = connector_status_disconnected; + +if (connector->edid_blob_ptr) + old_status = connector_status_connected;if (ast_dp501_is_connected (ast)) -return connector_status_connected; -return connector_status_disconnected; + status = connector_status_connected; + +if (status != old_status) + ++connector->epoch_counter; +return connector_status_connected; }static const struct drm_connector_helper_funcs ast_dp501_connector_helper_funcs = {
Signature · 1 line
2.46.0
Thomas Zimmermann
maintainerPATCH 7/9 drm/ast: sil164: Transparently handle BMC support
In reply to Thomas ZimmermannPermanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC.
--- drivers/gpu/drm/ast/ast_sil164.c | 40 ++++++++++++++++++++++++++++++-- 1 file changed, 38 insertions(+), 2 deletions(-)
drivers/gpu/drm/ast/ast_sil164.c +38 -2
@@ -21,9 +21,45 @@ static const struct drm_encoder_funcs ast_sil164_encoder_funcs = {* Connector */ +static int ast_sil164_connector_helper_get_modes (struct drm_connector *connector) +{ +int count =drm_connector_helper_get_modes (connector); + +if (!count) { +/* +* There's no EDID data without a connected monitor. Set BMC- +* compatible modes in this case. The XGA default resolution +* should work well for all BMCs. +*/ + count =drm_add_modes_noedid (connector,4096 ,4096 ); +if (count) +drm_set_preferred_mode (connector,1024 ,768 ); + } + +return count; +} + +static int ast_sil164_connector_helper_detect_ctx (struct drm_connector *connector, +struct drm_modeset_acquire_ctx *ctx, +bool force) +{ +enum drm_connector_status old_status, status; + +if (connector->edid_blob_ptr) + old_status = connector_status_connected; +else + old_status = connector_status_disconnected; + + status =drm_connector_helper_detect_from_ddc (connector, ctx, force); + +if (status != old_status) + ++connector->epoch_counter; +return connector_status_connected; +} +static const struct drm_connector_helper_funcs ast_sil164_connector_helper_funcs = { - .get_modes = drm_connector_helper_get_modes, - .detect_ctx = drm_connector_helper_detect_from_ddc, + .get_modes = ast_sil164_connector_helper_get_modes, + .detect_ctx = ast_sil164_connector_helper_detect_ctx, };static const struct drm_connector_funcs ast_sil164_connector_funcs = {
Signature · 1 line
2.46.0
Thomas Zimmermann
maintainerPATCH 8/9 drm/ast: vga: Transparently handle BMC support
In reply to Thomas ZimmermannPermanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before.
If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC.
--- drivers/gpu/drm/ast/ast_vga.c | 40 +++++++++++++++++++++++++++++++++-- 1 file changed, 38 insertions(+), 2 deletions(-)
drivers/gpu/drm/ast/ast_vga.c +38 -2
@@ -21,9 +21,45 @@ static const struct drm_encoder_funcs ast_vga_encoder_funcs = {* Connector */ +static int ast_vga_connector_helper_get_modes (struct drm_connector *connector) +{ +int count =drm_connector_helper_get_modes (connector); + +if (!count) { +/* +* There's no EDID data without a connected monitor. Set BMC- +* compatible modes in this case. The XGA default resolution +* should work well for all BMCs. +*/ + count =drm_add_modes_noedid (connector,4096 ,4096 ); +if (count) +drm_set_preferred_mode (connector,1024 ,768 ); + } + +return count; +} + +static int ast_vga_connector_helper_detect_ctx (struct drm_connector *connector, +struct drm_modeset_acquire_ctx *ctx, +bool force) +{ +enum drm_connector_status old_status, status; + +if (connector->edid_blob_ptr) + old_status = connector_status_connected; +else + old_status = connector_status_disconnected; + + status =drm_connector_helper_detect_from_ddc (connector, ctx, force); + +if (status != old_status) + ++connector->epoch_counter; +return connector_status_connected; +} +static const struct drm_connector_helper_funcs ast_vga_connector_helper_funcs = { - .get_modes = drm_connector_helper_get_modes, - .detect_ctx = drm_connector_helper_detect_from_ddc, + .get_modes = ast_vga_connector_helper_get_modes, + .detect_ctx = ast_vga_connector_helper_detect_ctx, };static const struct drm_connector_funcs ast_vga_connector_funcs = {
Signature · 1 line
2.46.0
Thomas Zimmermann
maintainerPATCH 9/9 drm/ast: Remove BMC output
In reply to Thomas ZimmermannAst's BMC connector tracks the status of an underlying physical connector and updates the BMC status accordingly. This functionality works around GNOME's settings app, which cannot handle multiple outputs on the same CRTC.
The workaround is now obsolete as all code for physical outputs handle BMC support internally. Hence, remove the driver's code and the BMC output entirely.
--- drivers/gpu/drm/ast/ast_drv.h | 4 -- drivers/gpu/drm/ast/ast_mode.c | 107 --------------------------------- 2 files changed, 111 deletions(-)
drivers/gpu/drm/ast/ast_drv.h +0 -4
@@ -206,10 +206,6 @@ struct ast_device {struct drm_encoder encoder;struct drm_connector connector; } astdp; -struct { -struct drm_encoder encoder; -struct ast_bmc_connector bmc_connector; - } bmc; } output;bool support_wide_screen;
drivers/gpu/drm/ast/ast_mode.c +0 -107
149 lines not on this page · raw message
Signature · 1 line
2.46.0