init FEC @ MPC5200
Ben,
after cloning the latest u-boot git I can see that you've added this inside the mvBC-P board setup :
int board_eth_init(bd_t *bis)
{
cpu_eth_init(bis); /* Built in FEC comes first */ return pci_eth_init(bis);
}
Are you aware that there's no PHY connected and the ETH-Pins are used otherwise ?
CONFIG_MPC5xxx_FEC is _not_ defined.
Can you tell me where "cpu_eth_init(bis)" is actually pointing to ?
regards,
Andr?
MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
Quoted 11 lines · Andre Schwarz
Ben,
after cloning the latest u-boot git I can see that you've added this inside the mvBC-P board setup :
int
board_eth_init(bd_t *bis)
{
cpu_eth_init(bis); /* Built in FEC comes first */ returnpci_eth_init(bis);
}
Quoted 10 lines
Are you aware that there's no PHY connected and the ETH-Pins are used otherwise ?
CONFIG_MPC5xxx_FECis _not_ defined.Can you tell me where "
cpu_eth_init(bis)" is actually pointing to ?
Since CONFIG_MPC5xxx_FEC isn't defined, the default weak cpu_eth_init() function in net/eth.c should get called, which does essentially nothing. I assumed that since you #undef'd the FEC controller in your board header file (instead of leaving it out completely), that it was perhaps optional, and so kept the call to cpu_eth_init() as shown above.
Are you seeing a problem with this?
Quoted 6 lines
regards,
Andr?MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
regards,
Ben
Quoted 22 lines · Ben Warren
Quoted 11 lines · Andre Schwarz
Ben,
after cloning the latest u-boot git I can see that you've added this inside the mvBC-P board setup :
int
board_eth_init(bd_t *bis)
{
cpu_eth_init(bis); /* Built in FEC comes first */ returnpci_eth_init(bis);
}Quoted 10 lines
Are you aware that there's no PHY connected and the ETH-Pins are used otherwise ?
CONFIG_MPC5xxx_FECis _not_ defined.Can you tell me where "
cpu_eth_init(bis)" is actually pointing to ?
Quoted 6 lines
Since
CONFIG_MPC5xxx_FECisn't defined, the default weakcpu_eth_init()function innet/eth.cshould get called, which does essentially nothing. I assumed that since you #undef'd the FEC controller in your board header file (instead of leaving it out completely), that it was perhaps optional, and so kept the call tocpu_eth_init()as shown above.
ok - missed that.
Quoted 2 lines
Are you seeing a problem with this?
no - just wanted to know.
Thanks for the hint,
Andr?
Quoted 9 lines
Quoted 7 lines
regards,
Andr?MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler -
Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtnerregards,
Ben
MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner