Skip to contentSkip to conversation

mlx4_en: Always allocate RX ring for each completion vector

PATCH Applied Yevgeny Petrilin 2 participants 2 messages Dec 22, 2008 – Dec 26, 2008

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 7/9 mlx4_en: Always allocate RX ring for each completion vector

Removed module parameter specifying number of rings.

---
 drivers/net/mlx4/en_main.c   |   12 ++++--------
 drivers/net/mlx4/en_params.c |    5 -----
 2 files changed, 4 insertions(+), 13 deletions(-)
drivers/net/mlx4/en_main.c +4 -8
index 34f3a19..eda72dd 100644
@@ -169,14 +169,10 @@ static void *mlx4_en_add(struct mlx4_dev *dev)
 	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
 		mlx4_info(mdev, "Using %d tx rings for port:%d\n",
 			  mdev->profile.prof[i].tx_ring_num, i);
-		if (!mdev->profile.prof[i].rx_ring_num) {
-			mdev->profile.prof[i].rx_ring_num =
-				min_t(int, dev->caps.num_comp_vectors, MAX_RX_RINGS);
-			mlx4_info(mdev, "Defaulting to %d rx rings for port:%d\n",
-				  mdev->profile.prof[i].rx_ring_num, i);
-		} else
-			mlx4_info(mdev, "Using %d rx rings for port:%d\n",
-				  mdev->profile.prof[i].rx_ring_num, i);
+		mdev->profile.prof[i].rx_ring_num =
+			min_t(int, dev->caps.num_comp_vectors, MAX_RX_RINGS);
+		mlx4_info(mdev, "Defaulting to %d rx rings for port:%d\n",
+			  mdev->profile.prof[i].rx_ring_num, i);
 	}
 
 	/* Create our own workqueue for reset/multicast tasks
drivers/net/mlx4/en_params.c +0 -5
index 047b37f..6483ae9 100644
@@ -65,9 +65,6 @@ MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
 MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]."
 			   " Per priority bit mask");
 
-MLX4_EN_PARM_INT(rx_ring_num1, 0, "Number or Rx rings for port 1 (0 = #cores)");
-MLX4_EN_PARM_INT(rx_ring_num2, 0, "Number or Rx rings for port 2 (0 = #cores)");
-
 MLX4_EN_PARM_INT(tx_ring_size1, MLX4_EN_AUTO_CONF, "Tx ring size for port 1");
 MLX4_EN_PARM_INT(tx_ring_size2, MLX4_EN_AUTO_CONF, "Tx ring size for port 2");
 MLX4_EN_PARM_INT(rx_ring_size1, MLX4_EN_AUTO_CONF, "Rx ring size for port 1");
@@ -95,8 +92,6 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
 		params->prof[1].tx_ring_num = 1;
 		params->prof[2].tx_ring_num = 1;
 	}
-	params->prof[1].rx_ring_num = min_t(int, rx_ring_num1, MAX_RX_RINGS);
-	params->prof[2].rx_ring_num = min_t(int, rx_ring_num2, MAX_RX_RINGS);
 
 	if (tx_ring_size1 == MLX4_EN_AUTO_CONF)
 		tx_ring_size1 = MLX4_EN_DEF_TX_RING_SIZE;
Signature · 1 line
1.5.4
maintainer
#1 lore raw

From: Yevgeny Petrilin <[email protected]>
Date: Mon, 22 Dec 2008 12:01:23 +0200

Quoted 3 lines

Removed module parameter specifying number of rings.

Since patch 4 didn't apply this one won't either.

See what a waste of time it is when you submit patches that don't apply? There is a domino effect on the rest of the patches in the series since several if not all of them will fail to apply as well.