cirrusfb not working?
Hi,
I was trying a few days ago to boot a recent 2.6 kernel on my Amiga 3000.
From what I found online, in order to get a framebuffer display from my Picasso IV, I needed to use the cirrusfb driver to the kernel which replaced the older clgen driver (In latest 2.6 kernels).
I tried stuff like:
amiboot -k vmlinuz video=cirrusfb:
No matter what I append to the video parameter, I can never get a display from the graphics card, it always comes up from the native ECS. Kernel messages say that a cirrusfb supported card was found. I was then told that cirrusfb does not work as expected, so any information on that?
What eventually worked somehow, was: video=amifb:off, which produced a display from the Picasso, but was full of garbage.
Thanks,
Emmanuel
Try cirrusfb:640x480 or something
Default video modes
-------------------
At the moment, there are two kernel command line arguments supported:
mode:640x480
mode:800x600
or
mode:1024x768
Full support for startup video modes (modedb) will be integrated soon.
2009/1/16 Emmanouel Vasilakis <[email protected]>:
Quoted 27 lines
Hi,
I was trying a few days ago to boot a recent 2.6 kernel on my Amiga 3000.
From what I found online, in order to get a framebuffer display from my Picasso IV, I needed to use the cirrusfb driver to the kernel which replaced the older clgen driver (In latest 2.6 kernels).
I tried stuff like:
amiboot -k vmlinuz video=cirrusfb:
No matter what I append to the video parameter, I can never get a display from the graphics card, it always comes up from the native ECS. Kernel messages say that a cirrusfb supported card was found. I was then told that cirrusfb does not work as expected, so any information on that?
What eventually worked somehow, was: video=amifb:off, which produced a display from the Picasso, but was full of garbage.
Thanks,
Emmanuel
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Mike,
Quoted 7 lines · mike
Try cirrusfb:640x480 or something
Default video modes
-------------------
At the moment, there are two kernel command line arguments supported:
Quoted 7 lines
mode:640x480
mode:800x600
or
mode:1024x768Full support for startup video modes (modedb) will be integrated soon.
Did try those opts, and everything else I could think off. No go.
Am I supposed to see the kernel booting in that resolution, or will it first boot and switch to picasso when the cirrusfb module is loaded?
My exact amiboot line is:
1> amiboot -k vmlinuz video=cirrusfb:640x480
Thanks!
Hm, im out of ideas, you could try 2.8.28, i uploaded it to aminet a few days ago, but something tells me that wont make any difference. If that doesnt work, try 2.4, and if that works, holler.
-Mike
2009/1/17 Emmanuel Vasilakis <[email protected]>:
Quoted 32 lines
Hi Mike,
Quoted 8 lines · mike
Try cirrusfb:640x480 or something
Default video modes
-------------------
At the moment, there are two kernel command line arguments supported:Quoted 7 lines
mode:640x480
mode:800x600
or
mode:1024x768Full support for startup video modes (modedb) will be integrated soon.
Did try those opts, and everything else I could think off. No go.
Am I supposed to see the kernel booting in that resolution, or will it first boot and switch to picasso when the cirrusfb module is loaded?
My exact amiboot line is:
1> amiboot -k vmlinuz video=cirrusfb:640x480
Thanks!