Skip to contentSkip to conversation

cirrusfb not working?

DISCUSSION Emmanouel Vasilakis 2 participants 4 messages Jan 16, 2009 – Jan 18, 2009

lore
Share & tools
lore
#0 lore raw

Hi,

I was trying a few days ago to boot a recent 2.6 kernel on my Amiga 3000.

From what I found online, in order to get a framebuffer display from my Picasso IV, I needed to use the cirrusfb driver to the kernel which replaced the older clgen driver (In latest 2.6 kernels).

I tried stuff like:

amiboot -k vmlinuz video=cirrusfb:

No matter what I append to the video parameter, I can never get a display from the graphics card, it always comes up from the native ECS. Kernel messages say that a cirrusfb supported card was found. I was then told that cirrusfb does not work as expected, so any information on that?

What eventually worked somehow, was: video=amifb:off, which produced a display from the Picasso, but was full of garbage.

Thanks,
Emmanuel

#1 lore raw

Try cirrusfb:640x480 or something

Default video modes
-------------------
At the moment, there are two kernel command line arguments supported:

mode:640x480
mode:800x600
or
mode:1024x768

Full support for startup video modes (modedb) will be integrated soon.

2009/1/16 Emmanouel Vasilakis <[email protected]>:

Quoted 27 lines

Hi,

I was trying a few days ago to boot a recent 2.6 kernel on my Amiga 3000.

From what I found online, in order to get a framebuffer display from my Picasso IV, I needed to use the cirrusfb driver to the kernel which replaced the older clgen driver (In latest 2.6 kernels).

I tried stuff like:

amiboot -k vmlinuz video=cirrusfb:

No matter what I append to the video parameter, I can never get a display from the graphics card, it always comes up from the native ECS. Kernel messages say that a cirrusfb supported card was found. I was then told that cirrusfb does not work as expected, so any information on that?

What eventually worked somehow, was: video=amifb:off, which produced a display from the Picasso, but was full of garbage.

Thanks,
Emmanuel
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw

Hi Mike,

Quoted 7 lines · mike

Try cirrusfb:640x480 or something

Default video modes
-------------------
At the moment, there are two kernel command line arguments supported:

Quoted 7 lines

mode:640x480
mode:800x600
or
mode:1024x768

Full support for startup video modes (modedb) will be integrated soon.

Did try those opts, and everything else I could think off. No go.

Am I supposed to see the kernel booting in that resolution, or will it first boot and switch to picasso when the cirrusfb module is loaded?

My exact amiboot line is:

1> amiboot -k vmlinuz video=cirrusfb:640x480

Thanks!

#3 lore raw

Hm, im out of ideas, you could try 2.8.28, i uploaded it to aminet a few days ago, but something tells me that wont make any difference. If that doesnt work, try 2.4, and if that works, holler.

-Mike

2009/1/17 Emmanuel Vasilakis <[email protected]>:

Quoted 32 lines

Hi Mike,

Quoted 8 lines · mike

Try cirrusfb:640x480 or something

Default video modes
-------------------
At the moment, there are two kernel command line arguments supported:

Quoted 7 lines

mode:640x480
mode:800x600
or
mode:1024x768

Full support for startup video modes (modedb) will be integrated soon.

Did try those opts, and everything else I could think off. No go.

Am I supposed to see the kernel booting in that resolution, or will it first boot and switch to picasso when the cirrusfb module is loaded?

My exact amiboot line is:

1> amiboot -k vmlinuz video=cirrusfb:640x480

Thanks!