OMAP TV video
Note: if this is the wrong list, or if there's a better place to ask these questions, please redirect me.
I have an OMAP/Zoom1 (3430 LDP). I'm trying to use the S-Video output, without much success. Today, I grabbed the latest tree (as least from what I can gather from various web pages) from git://git.omapzoom.org/repo/omapkernel.git
When I try to use the TV, the kernel crashes immediately:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xd8050440
Internal error: : 1008 [#1] Modules linked in: CPU: 0 Not tainted (2.6.27.10-omap1-00181-gc9fd795 #1) PC is at omap2_disp_enable_output_dev+0x30/0x44 LR is at write_layer_out+0x118/0x220 pc : [<c0053a84>] lr : [<c018f3d4>] psr: 60000013
sp : c7963ec8 ip : c7963ed8 fp : c7963ed4
r10: c7963f70 r9 : c7940e78 r8 : c039c8f0
r7 : 00000000 r6 : 00000003 r5 : c78626f8 r4 : c03c3c44 r3 : 00000000 r2 : d8050000 r1 : 00000003 r0 : 00000005
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 00c5387f Table: 87320018 DAC: 00000015 Process echo (pid: 723, stack limit = 0xc79622e0)
kernel version: Linux version 2.6.27.10-omap1-00181-gc9fd795
config: omap_ldp_defconfig
Notes:
* An older kernel (circa 2008-12-01) does not crash. The TV output is not correct, but at least it doesn't crash.
* How can I turn off the double printk()? All kernel messages get duplicated and it makes it terribly hard to use. e.g.
<5>Looking up port of RPC 100003/2 on 192.168.1.100
Looking up port of RPC 100003/2 on 192.168.1.100
<5>Looking up port of RPC 100005/1 on 192.168.1.100
Looking up port of RPC 100005/1 on 192.168.1.100
VFS: Mounted root (nfs filesystem).
VFS: Mounted root (nfs filesystem). Other kernels (PowerPC, etc) don't suffer from this.
* This kernel version is very unstable - it simply quits after just a few moments of running. I didn't see this with the older kernel.
Thanks for any ideas/pointers
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 10 lines · ext Gary Thomas
Note: if this is the wrong list, or if there's a better place to ask these questions, please redirect me.
I have an OMAP/Zoom1 (3430 LDP). I'm trying to use the S-Video output, without much success. Today, I grabbed the latest tree (as least from what I can gather from various web pages) from
git://git.omapzoom.org/repo/omapkernel.gitWhen I try to use the TV, the kernel crashes immediately:
Unhandled fault: external abort on non-linefetch (0x1008) at0xd8050440
I'm guessing that the external abort is caused by the DSS interface clock being disabled.
--Imre
Quoted 47 lines
Internal error: : 1008 [#1] Modules linked in: CPU: 0 Not tainted (2.6.27.10-omap1-00181-gc9fd795 #1) PC is at omap2_disp_enable_output_dev+0x30/0x44 LR is at write_layer_out+0x118/0x220 pc : [<c0053a84>] lr : [<c018f3d4>] psr: 60000013sp :
c7963ec8ip :c7963ed8fp :c7963ed4
r10:c7963f70r9 :c7940e78r8 :c039c8f0
r7 : 00000000 r6 : 00000003 r5 :c78626f8r4 :c03c3c44r3 : 00000000 r2 :d8050000r1 : 00000003 r0 : 00000005
Flags: nZCv IRQs on FIQs on ModeSVC_32ISA ARM Segment user
Control:00c5387fTable: 87320018 DAC: 00000015 Process echo (pid: 723, stack limit =0xc79622e0)kernel version: Linux version 2.6.27.10-omap1-00181-gc9fd795
config:omap_ldp_defconfigNotes:
* An older kernel (circa 2008-12-01) does not crash. The TV output is not correct, but at least it doesn't crash.
* How can I turn off the doubleprintk()? All kernel messages get duplicated and it makes it terribly hard to use. e.g.<5>Looking up port of RPC 100003/2 on 192.168.1.100 Looking up port of RPC 100003/2 on 192.168.1.100 <5>Looking up port of RPC 100005/1 on 192.168.1.100 Looking up port of RPC 100005/1 on 192.168.1.100 VFS: Mounted root (nfs filesystem). VFS: Mounted root (nfs filesystem).Other kernels (PowerPC, etc) don't suffer from this.
* This kernel version is very unstable - it simply quits after just a few moments of running. I didn't see this with the older kernel.Thanks for any ideas/pointers
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 9 lines · Imre Deak
Quoted 8 lines · ext Gary Thomas
Note: if this is the wrong list, or if there's a better place to ask these questions, please redirect me.
I have an OMAP/Zoom1 (3430 LDP). I'm trying to use the S-Video output, without much success. Today, I grabbed the latest tree (as least from what I can gather from various web pages) from
git://git.omapzoom.org/repo/omapkernel.git
Quoted 5 lines
Quoted 2 lines
When I try to use the TV, the kernel crashes immediately:
Unhandled fault: external abort on non-linefetch (0x1008) at0xd8050440I'm guessing that the external abort is caused by the DSS interface clock being disabled.
How can I fix it? Am I missing some setup?
How am I supposed to use the S-Video (TV) interface? Currently, I'm executing this (which used to work):
echo tv >/sys/class/display_control/omap_disp_control/graphics
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Quoted 12 lines · Gary Thomas
Quoted 11 lines · Imre Deak
Quoted 10 lines · ext Gary Thomas
Note: if this is the wrong list, or if there's a better place to ask these questions, please redirect me.
I have an OMAP/Zoom1 (3430 LDP). I'm trying to use the S-Video output, without much success. Today, I grabbed the latest tree (as least from what I can gather from various web pages) from
git://git.omapzoom.org/repo/omapkernel.gitWhen I try to use the TV, the kernel crashes immediately:
Unhandled fault: external abort on non-linefetch (0x1008) at0xd8050440
Quoted 8 lines
Quoted 2 lines
I'm guessing that the external abort is caused by the DSS interface clock being disabled.
How can I fix it? Am I missing some setup?
How am I supposed to use the S-Video (TV) interface? Currently, I'm executing this (which used to work):
echo tv >/sys/class/display_control/omap_disp_control/graphics
Interestingly, this sort of worked (no kernel crash) when I disabled Power Management. Sadly, it quit/vanished after some scant few seconds...
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------