Skip to contentSkip to conversation

OMAP TV video

DISCUSSION Gary Thomas 2 participants 4 messages Feb 4, 2009

lore
Share & tools
lore
#0 lore raw

Note: if this is the wrong list, or if there's a better place to ask these questions, please redirect me.

I have an OMAP/Zoom1 (3430 LDP). I'm trying to use the S-Video output, without much success. Today, I grabbed the latest tree (as least from what I can gather from various web pages) from git://git.omapzoom.org/repo/omapkernel.git

When I try to use the TV, the kernel crashes immediately:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xd8050440

Internal error: : 1008 [#1]
Modules linked in:

CPU: 0    Not tainted  (2.6.27.10-omap1-00181-gc9fd795 #1)
PC is at omap2_disp_enable_output_dev+0x30/0x44
LR is at write_layer_out+0x118/0x220
pc : [<c0053a84>]    lr : [<c018f3d4>]    psr: 60000013

sp : c7963ec8 ip : c7963ed8 fp : c7963ed4
r10: c7963f70 r9 : c7940e78 r8 : c039c8f0
r7 : 00000000 r6 : 00000003 r5 : c78626f8 r4 : c03c3c44 r3 : 00000000 r2 : d8050000 r1 : 00000003 r0 : 00000005
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 00c5387f Table: 87320018 DAC: 00000015 Process echo (pid: 723, stack limit = 0xc79622e0)

kernel version: Linux version 2.6.27.10-omap1-00181-gc9fd795
config: omap_ldp_defconfig

Notes:
* An older kernel (circa 2008-12-01) does not crash. The TV output is not correct, but at least it doesn't crash.
* How can I turn off the double printk()? All kernel messages get duplicated and it makes it terribly hard to use. e.g.

    <5>Looking up port of RPC 100003/2 on 192.168.1.100
    Looking up port of RPC 100003/2 on 192.168.1.100
    <5>Looking up port of RPC 100005/1 on 192.168.1.100
    Looking up port of RPC 100005/1 on 192.168.1.100
    VFS: Mounted root (nfs filesystem).
    VFS: Mounted root (nfs filesystem).

Other kernels (PowerPC, etc) don't suffer from this.
* This kernel version is very unstable - it simply quits after just a few moments of running. I didn't see this with the older kernel.

Thanks for any ideas/pointers

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#1 lore raw
Quoted 10 lines · ext Gary Thomas

Note: if this is the wrong list, or if there's a better place to ask these questions, please redirect me.

I have an OMAP/Zoom1 (3430 LDP). I'm trying to use the S-Video output, without much success. Today, I grabbed the latest tree (as least from what I can gather from various web pages) from git://git.omapzoom.org/repo/omapkernel.git

When I try to use the TV, the kernel crashes immediately:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xd8050440

I'm guessing that the external abort is caused by the DSS interface clock being disabled.

--Imre

Quoted 47 lines
Internal error: : 1008 [#1]
Modules linked in:

CPU: 0    Not tainted  (2.6.27.10-omap1-00181-gc9fd795 #1)
PC is at omap2_disp_enable_output_dev+0x30/0x44
LR is at write_layer_out+0x118/0x220
pc : [<c0053a84>]    lr : [<c018f3d4>]    psr: 60000013

sp : c7963ec8 ip : c7963ed8 fp : c7963ed4
r10: c7963f70 r9 : c7940e78 r8 : c039c8f0
r7 : 00000000 r6 : 00000003 r5 : c78626f8 r4 : c03c3c44 r3 : 00000000 r2 : d8050000 r1 : 00000003 r0 : 00000005
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 00c5387f Table: 87320018 DAC: 00000015 Process echo (pid: 723, stack limit = 0xc79622e0)

kernel version: Linux version 2.6.27.10-omap1-00181-gc9fd795
config: omap_ldp_defconfig

Notes:
* An older kernel (circa 2008-12-01) does not crash. The TV output is not correct, but at least it doesn't crash.
* How can I turn off the double printk()? All kernel messages get duplicated and it makes it terribly hard to use. e.g.

    <5>Looking up port of RPC 100003/2 on 192.168.1.100
    Looking up port of RPC 100003/2 on 192.168.1.100
    <5>Looking up port of RPC 100005/1 on 192.168.1.100
    Looking up port of RPC 100005/1 on 192.168.1.100
    VFS: Mounted root (nfs filesystem).
    VFS: Mounted root (nfs filesystem).

Other kernels (PowerPC, etc) don't suffer from this.
* This kernel version is very unstable - it simply quits after just a few moments of running. I didn't see this with the older kernel.

Thanks for any ideas/pointers

--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw
Quoted 9 lines · Imre Deak
Quoted 8 lines · ext Gary Thomas

Note: if this is the wrong list, or if there's a better place to ask these questions, please redirect me.

I have an OMAP/Zoom1 (3430 LDP). I'm trying to use the S-Video output, without much success. Today, I grabbed the latest tree (as least from what I can gather from various web pages) from git://git.omapzoom.org/repo/omapkernel.git

Quoted 5 lines
Quoted 2 lines

When I try to use the TV, the kernel crashes immediately:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xd8050440

I'm guessing that the external abort is caused by the DSS interface clock being disabled.

How can I fix it? Am I missing some setup?

How am I supposed to use the S-Video (TV) interface? Currently, I'm executing this (which used to work):
echo tv >/sys/class/display_control/omap_disp_control/graphics

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#3 lore raw
Quoted 12 lines · Gary Thomas
Quoted 11 lines · Imre Deak
Quoted 10 lines · ext Gary Thomas

Note: if this is the wrong list, or if there's a better place to ask these questions, please redirect me.

I have an OMAP/Zoom1 (3430 LDP). I'm trying to use the S-Video output, without much success. Today, I grabbed the latest tree (as least from what I can gather from various web pages) from git://git.omapzoom.org/repo/omapkernel.git

When I try to use the TV, the kernel crashes immediately:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xd8050440

Quoted 8 lines
Quoted 2 lines

I'm guessing that the external abort is caused by the DSS interface clock being disabled.

How can I fix it? Am I missing some setup?

How am I supposed to use the S-Video (TV) interface? Currently, I'm executing this (which used to work):
echo tv >/sys/class/display_control/omap_disp_control/graphics

Interestingly, this sort of worked (no kernel crash) when I disabled Power Management. Sadly, it quit/vanished after some scant few seconds...

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------