Skip to contentSkip to conversation

OMAP [TV] video

DISCUSSION Gary Thomas 3 participants 4 messages Feb 10, 2009 – Feb 11, 2009

lore
Share & tools
lore
#0 lore raw

I'm trying to get TV [S-Video] working on my 3530 board. The settings in the current kernel don't seem to work very well on my TV (U.S. NTSC, standard). Comparing the video encoder setup with the suggested values in the manual, I find many differences, mostly with respect to the framing (signal shaping).

Questions:
* Are the settings in the kernel tree known to work [as is]?
* Why the divergence from the recommended values?

Any ideas or helpful pointers would be graciously accepted

Thanks

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#1 lore raw

Thanks,
Vaibhav Hiremath

Quoted 14 lines

-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of Gary Thomas
Sent: Tuesday, February 10, 2009 9:35 PM
To: Linux OMAP
Subject: OMAP [TV] video

I'm trying to get TV [S-Video] working on my 3530 board. The settings in the current kernel don't seem to work very well on my TV (U.S. NTSC, standard). Comparing the video encoder setup with the suggested values in the manual, I find many differences, mostly with respect to the framing (signal shaping).

Quoted 6 lines

Questions:
* Are the settings in the kernel tree known to work [as is]?
* Why the divergence from the recommended values?

Any ideas or helpful pointers would be graciously accepted

[Hiremath, Vaibhav] Can you provide some more details like,

Which kernel version are you using?
Are you using DSS2 for TV out?
Which board you are using, (must be EVM)?

Quoted 12 lines

Thanks

--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux- omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw
Quoted 21 lines · Vaibhav

Thanks,
Vaibhav Hiremath

Quoted 18 lines

-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of Gary Thomas
Sent: Tuesday, February 10, 2009 9:35 PM
To: Linux OMAP
Subject: OMAP [TV] video

I'm trying to get TV [S-Video] working on my 3530 board. The settings in the current kernel don't seem to work very well on my TV (U.S. NTSC, standard). Comparing the video encoder setup with the suggested values in the manual, I find many differences, mostly with respect to the framing (signal shaping).

Questions:
* Are the settings in the kernel tree known to work [as is]?
* Why the divergence from the recommended values?

Quoted 5 lines
Quoted 2 lines

Any ideas or helpful pointers would be graciously accepted

[Hiremath, Vaibhav] Can you provide some more details like,

Which kernel version are you using?

I started with the "official" OMAP tree (git://git.omapzoom.org/repo/omapkernel.git)

If there is a better starting point, I'd certainly like to know. Trying to find the correct tree to use is challenging.

Quoted 1 line

Are you using DSS2 for TV out?

Not sure exactly what that means. Again, trying to follow this development is not straight forward - it seems that those who know the answers assume that everyone does, so why bother explaining anything? (Maybe that's a bit cynical, but my experience so far)

Quoted 1 line

Which board you are using, (must be EVM)?

It's a new board under development, more or less like the beagle.

Again, I'd appreciate any help or pointers. Thanks

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#3 lore raw

Op 11 feb 2009, om 13:25 heeft Gary Thomas het volgende geschreven:

Quoted 24 lines
Quoted 23 lines · Vaibhav

Thanks,
Vaibhav Hiremath

Quoted 20 lines

-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of Gary Thomas
Sent: Tuesday, February 10, 2009 9:35 PM
To: Linux OMAP
Subject: OMAP [TV] video

I'm trying to get TV [S-Video] working on my 3530 board. The settings in the current kernel don't seem to work very well on my TV (U.S. NTSC, standard). Comparing the video encoder setup with the suggested values in the manual, I find many differences, mostly with respect to the framing (signal shaping).

Questions:
* Are the settings in the kernel tree known to work [as is]?
* Why the divergence from the recommended values?

Any ideas or helpful pointers would be graciously accepted

Quoted 7 lines
Quoted 3 lines

[Hiremath, Vaibhav] Can you provide some more details like,

Which kernel version are you using?

I started with the "official" OMAP tree (git://git.omapzoom.org/repo/omapkernel.git)

If there is a better starting point, I'd certainly like to know.

The right one is at http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=shortlog

regards,

Koen