OMAP [TV] video
I'm trying to get TV [S-Video] working on my 3530 board. The settings in the current kernel don't seem to work very well on my TV (U.S. NTSC, standard). Comparing the video encoder setup with the suggested values in the manual, I find many differences, mostly with respect to the framing (signal shaping).
Questions:
* Are the settings in the kernel tree known to work [as is]?
* Why the divergence from the recommended values?
Any ideas or helpful pointers would be graciously accepted
Thanks
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Thanks,
Vaibhav Hiremath
Quoted 14 lines
-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of Gary Thomas
Sent: Tuesday, February 10, 2009 9:35 PM
To: Linux OMAP
Subject: OMAP [TV] videoI'm trying to get TV [S-Video] working on my 3530 board. The settings in the current kernel don't seem to work very well on my TV (
U.S. NTSC, standard). Comparing the video encoder setup with the suggested values in the manual, I find many differences, mostly with respect to the framing (signal shaping).
Quoted 6 lines
Questions:
* Are the settings in the kernel tree known to work [as is]?
* Why the divergence from the recommended values?Any ideas or helpful pointers would be graciously accepted
[Hiremath, Vaibhav] Can you provide some more details like,
Which kernel version are you using?
Are you using DSS2 for TV out?
Which board you are using, (must be EVM)?
Quoted 12 lines
Thanks
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux- omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 21 lines · Vaibhav
Thanks,
Vaibhav HiremathQuoted 18 lines
-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of Gary Thomas
Sent: Tuesday, February 10, 2009 9:35 PM
To: Linux OMAP
Subject: OMAP [TV] videoI'm trying to get TV [S-Video] working on my 3530 board. The settings in the current kernel don't seem to work very well on my TV (
U.S. NTSC, standard). Comparing the video encoder setup with the suggested values in the manual, I find many differences, mostly with respect to the framing (signal shaping).Questions:
* Are the settings in the kernel tree known to work [as is]?
* Why the divergence from the recommended values?
Quoted 5 lines
Quoted 2 lines
Any ideas or helpful pointers would be graciously accepted
[Hiremath, Vaibhav] Can you provide some more details like,
Which kernel version are you using?
I started with the "official" OMAP tree (git://git.omapzoom.org/repo/omapkernel.git)
If there is a better starting point, I'd certainly like to know. Trying to find the correct tree to use is challenging.
Quoted 1 line
Are you using DSS2 for TV out?
Not sure exactly what that means. Again, trying to follow this development is not straight forward - it seems that those who know the answers assume that everyone does, so why bother explaining anything? (Maybe that's a bit cynical, but my experience so far)
Quoted 1 line
Which board you are using, (must be EVM)?
It's a new board under development, more or less like the beagle.
Again, I'd appreciate any help or pointers. Thanks
Signature · 4 lines
------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------
Op 11 feb 2009, om 13:25 heeft Gary Thomas het volgende geschreven:
Quoted 24 lines
Quoted 23 lines · Vaibhav
Thanks,
Vaibhav HiremathQuoted 20 lines
-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of Gary Thomas
Sent: Tuesday, February 10, 2009 9:35 PM
To: Linux OMAP
Subject: OMAP [TV] videoI'm trying to get TV [S-Video] working on my 3530 board. The settings in the current kernel don't seem to work very well on my TV (
U.S. NTSC, standard). Comparing the video encoder setup with the suggested values in the manual, I find many differences, mostly with respect to the framing (signal shaping).Questions:
* Are the settings in the kernel tree known to work [as is]?
* Why the divergence from the recommended values?Any ideas or helpful pointers would be graciously accepted
Quoted 7 lines
Quoted 3 lines
[Hiremath, Vaibhav] Can you provide some more details like,
Which kernel version are you using?
I started with the "official" OMAP tree (
git://git.omapzoom.org/repo/omapkernel.git)If there is a better starting point, I'd certainly like to know.
The right one is at http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=shortlog
regards,
Koen