Configure PSC4 and PSC5 as UART.
Subsystems (2)
PATCH v2 1/1 Configure PSC4 and PSC5 as UART.
On digsy MTC PSC4 and PSC5 should be configured as UART, not PSC3 and PSC4.
Signed-off-by Grzegorz Bernacki <[email protected]>
---
Version 2:
- rebased to Ben Herrenschmidt's -next
arch/powerpc/boot/dts/digsy_mtc.dts | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-)
arch/powerpc/boot/dts/digsy_mtc.dts +6 -6
@@ -155,18 +155,18 @@ reg = <0x1f00 0x100>; }; - serial@2400 { // PSC3 - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2400 0x100>; - interrupts = <2 3 0>; - }; - serial@2600 { // PSC4 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2600 0x100>; interrupts = <2 11 0>; }; + serial@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2800 0x100>; + interrupts = <2 12 0>; + }; + ethernet@3000 { compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>;
Signature · 1 line
1.5.2.2
Hi Grant,
Could you tell me when you are going to apply this patch and "Defconfig for mpc5200 updates" patch into your repository?
Thanks,
Grzesiek
Quoted 4 lines · Grzegorz Bernacki
Hi Grant,
Could you tell me when you are going to apply this patch and "Defconfig for mpc5200 updates" patch into your repository?
soon. Busy putting out another fire at the moment, but I'll pick it up soon.
g.
Signature · 2 lines
Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd.