Not able to view HD-TV via Technisat Skystar HD 2
Hi,
Quoted 1 line
since 3 days I have a Technisat Skystar HD 2 in my Computer (PCI-card)
was my mail some days ago. My fault: I installed the multiproto-driver, cause I read this:
Quoted 3 lines
Mantis/S2API driver
This is the preferred driver. DVB-S2 support in the Linux kernel is provided by API version 5.0, also known as S2API (and not multiproto). This API was released in kernel version 2.6.28
So I thought, I can only use this driver, if I use a kernel 2.6.28 which I do not and so I installed the multiproto-driver with part-success. But I read further and further and found out, that I was wrong. So yesterday I installed the S2API-driver with some more success. Channel-switching is very fast now and scan-s2 finds the hd-channels. I can even zap to a hd-channel, but viewing is the problem:
szap-output to a "normal" channel:
szap-s2 -a 0 -H -r -S 0 -n 373
zapping to 373 'NDR FS NDS;ARD':
delivery DVB-S, modulation QPSK
sat 0, frequency 12109 MHz H, symbolrate 27500000, coderate 3/4, rolloff 0.35
vpid 0x0a29, apid 0x0a2a, sid 0x0a2c
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal 0% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK status 1f | signal 0% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK
(and so on)
mplayer-output for this channel:
VDecoder init failed :(
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 192.0 kbit/12.50% (ratio: 24000->192000) Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 720 x 576 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 720x576 => 768x576 Planar YV12
A:91464.4 V:91464.4 A-V: 0.000 ct: -0.518 303/303 9% 2% 0.4% 0 0
OK so far, though the signal-strenght is shown 0%, the picture is Ok.
output of szap if I zap to a HD-channel - in this case arteHD
szap-s2 -a 0 -H -r -S 1 -n 385
reading channels from file '/home/hartmut/.szap/channels.conf' zapping to 385 'arte HD;ZDFvision':
delivery DVB-S2, modulation 8PSK
sat 0, frequency 11361 MHz H, symbolrate 22000000, coderate 2/3, rolloff 0.35
vpid 0x1842, apid 0x184d, sid 0x1856
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal 0% | snr 49% | ber 0 | unc -2 | status 1b | signal 2% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK status 1b | signal 2% | snr 0% | ber 2666666 | unc -2 | FE_HAS_LOCK status 1b | signal 2% | snr 0% | ber 6666666 | unc -2 | FE_HAS_LOCK status 1b | signal 2% | snr 0% | ber 1333333 | unc -2 | FE_HAS_LOCK status 1b | signal 2% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK status 1b | signal 2% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK status 1b | signal 2% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK
(and so on)
output of mplayer
Playing /dev/dvb/adapter0/dvr0.
TS file format detected.
VIDEO MPEG2(pid=6210) AUDIO MPA(pid=6221) NO SUBS (yet)! PROGRAM N. 0
(I have to wait 2 minutes)
Too many audio packets in the buffer: (1366 in 8392704 bytes). Maybe you are playing a non-interleaved stream/file or the codec failed? For AVI files, try to force non-interleaved mode with the -ni option.
MPEG: FATAL: EOF while searching for sequence header.
Video: Cannot read properties.
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000) Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A:10567.0 ( 2:56:07.0) of -1.1 (unknown) 0.2%
A:10567.1 ( 2:56:07.0) of -1.1 (unknown) 0.2%
So no video, but only audio
If I start mplayer with mplayer -vc +ffh264 I get the same output
Only ffplay can play the channel:
3 seconds fluently,
2 seconds staggering and
after another 5 seconds my free memory (about 500M) is full and I have to kill ffplay
output of ffplay:
built on Jan 16 2009 22:23:29, gcc: 4.3.1 20080507 (prerelease)
[gcc-4_3-branch revision 135036]
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]non-existing PPS referenced
[h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]non-existing PPS referenced
[h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]non-existing PPS referenced
[h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
I have several HD-TV.ts-files which are played very well with all applications, so in my opinion the videooutput is not ok.
Any advices?
Regards,
Hartmut
PS: Opensuse 11.0 on AMD64, everything updated to the newest ...
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 8 lines
since 3 days I have a Technisat Skystar HD 2 in my Computer (PCI-card)
was my mail some days ago. My fault: I installed the multiproto-driver, cause I read this:
Quoted 3 lines
Mantis/S2API driver
This is the preferred driver. DVB-S2 support in the Linux kernel is provided by API version 5.0, also known as S2API (and not multiproto). This API was released in kernel version 2.6.28
please try http://mercurial.intuxication.org/hg/s2-liplianin s2api drivers
Quoted 16 lines
So I thought, I can only use this driver, if I use a kernel 2.6.28 which I do not and so I installed the multiproto-driver with part-success. But I read further and further and found out, that I was wrong. So yesterday I installed the S2API-driver with some more success. Channel-switching is very fast now and scan-s2 finds the hd-channels. I can even zap to a hd-channel, but viewing is the problem:
szap-output to a "normal" channel:
szap-s2 -a 0 -H -r -S 0 -n 373
zapping to 373 'NDR FS NDS;ARD':
delivery DVB-S, modulation QPSK
sat 0, frequency 12109 MHz H, symbolrate 27500000, coderate 3/4, rolloff 0.35
vpid0x0a29, apid0x0a2a, sid0x0a2c
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
Quoted 5 lines
status 1f | signal 0% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK status 1f | signal 0% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK(and so on)
mplayer-output for this channel:
please try to use another demuxer with mplayer from svn
mplayer -demuxer lavf
Quoted 3 lines
VDecoder init failed :(
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Quoted 6 lines · Goga777 schrieb:
Quoted 6 lines
since 3 days I have a Technisat Skystar HD 2 in my Computer (PCI-card)
was my mail some days ago. My fault: I installed the multiproto-driver, cause I read this:
Quoted 6 lines
Quoted 4 lines
Quoted 4 lines
Mantis/S2API driver
This is the preferred driver. DVB-S2 support in the Linux kernel is provided by API version 5.0, also known as S2API (and not multiproto). This API was released in kernel version 2.6.28
please try http://mercurial.intuxication.org/hg/s2-liplianin s2api drivers
please read the below part, that was, what I did ...
Quoted 20 lines
Quoted 20 lines
So I thought, I can only use this driver, if I use a kernel 2.6.28 which I do not and so I installed the multiproto-driver with part-success. But I read further and further and found out, that I was wrong. So yesterday I installed the S2API-driver with some more success. Channel-switching is very fast now and scan-s2 finds the hd-channels. I can even zap to a hd-channel, but viewing is the problem:
szap-output to a "normal" channel:
szap-s2 -a 0 -H -r -S 0 -n 373
zapping to 373 'NDR FS NDS;ARD':
delivery DVB-S, modulation QPSK
sat 0, frequency 12109 MHz H, symbolrate 27500000, coderate 3/4, rolloff 0.35
vpid0x0a29, apid0x0a2a, sid0x0a2c
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'status 1f | signal 0% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK status 1f | signal 0% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK(and so on)
Quoted 7 lines
Quoted 2 lines
mplayer-output for this channel:
please try to use another demuxer with mplayer from svn
mplayer -demuxer lavf
The output of mplayer with this option:
Playing /dev/dvb/adapter0/dvr0.
libavformat file format detected.
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]non-existing PPS referenced
[h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]non-existing PPS referenced
[h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]non-existing PPS referenced
[h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]number of reference frames exceeds max (probably corrupt input), discarding one
[lavf] Audio stream found, -aid 0
[lavf] Video stream found, -vid 1
VIDEO: [H264] 1280x720 0bpp 50.000 fps 0.0 kbps ( 0.0 kbyte/s)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000) Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
[h264 @ 0xc5df60]B picture before any references, skipping [h264 @ 0xc5df60]decode_slice_header error
[h264 @ 0xc5df60]no frame!
Error while decoding frame!
[h264 @ 0xc5df60]B picture before any references, skipping [h264 @ 0xc5df60]decode_slice_header error
[h264 @ 0xc5df60]no frame!
Error while decoding frame!
[h264 @ 0xc5df60]warning: first frame is no keyframe
[h264 @ 0xc5df60]Missing reference picture
VDec: vo config request - 1280 x 720 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [xv] 1280x720 => 1280x720 Planar YV12
[h264 @ 0xc5df60]error while decoding MB 10 9, bytestream (-18)% 39 0 [h264 @ 0xc5df60]concealing 2919 DC, 2919 AC, 2919 MV errors
A:15563.2 V:15564.4 A-V: -1.191 ct: -0.306 0/ 0 86% 20% 0.4% 39 0
Exiting... (End of file)