Skip to contentSkip to conversation

Not able to view HD-TV via Technisat Skystar HD 2

linux-dvb Hartmut 2 participants 3 messages Mar 10, 2009 Media (V4L/DVB)

lore
Share & tools
lore

Hartmut

author
#0 lore raw

Hi,

Quoted 1 line

since 3 days I have a Technisat Skystar HD 2 in my Computer (PCI-card)

was my mail some days ago. My fault: I installed the multiproto-driver, cause I read this:

Quoted 3 lines

Mantis/S2API driver

This is the preferred driver. DVB-S2 support in the Linux kernel is provided by API version 5.0, also known as S2API (and not multiproto). This API was released in kernel version 2.6.28

So I thought, I can only use this driver, if I use a kernel 2.6.28 which I do not and so I installed the multiproto-driver with part-success. But I read further and further and found out, that I was wrong. So yesterday I installed the S2API-driver with some more success. Channel-switching is very fast now and scan-s2 finds the hd-channels. I can even zap to a hd-channel, but viewing is the problem:

szap-output to a "normal" channel:

szap-s2 -a 0 -H -r -S 0 -n 373
zapping to 373 'NDR FS NDS;ARD':
delivery DVB-S, modulation QPSK
sat 0, frequency 12109 MHz H, symbolrate 27500000, coderate 3/4, rolloff 0.35
vpid 0x0a29, apid 0x0a2a, sid 0x0a2c
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'

status 1f | signal   0% | snr   0% | ber 0 | unc -2 | FE_HAS_LOCK
status 1f | signal   0% | snr   0% | ber 0 | unc -2 | FE_HAS_LOCK

(and so on)

mplayer-output for this channel:

VDecoder init failed :(
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 192.0 kbit/12.50% (ratio: 24000->192000) Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 720 x 576 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 720x576 => 768x576 Planar YV12
A:91464.4 V:91464.4 A-V: 0.000 ct: -0.518 303/303 9% 2% 0.4% 0 0

OK so far, though the signal-strenght is shown 0%, the picture is Ok.

output of szap if I zap to a HD-channel - in this case arteHD

szap-s2 -a 0 -H -r -S 1 -n 385
reading channels from file '/home/hartmut/.szap/channels.conf' zapping to 385 'arte HD;ZDFvision':
delivery DVB-S2, modulation 8PSK
sat 0, frequency 11361 MHz H, symbolrate 22000000, coderate 2/3, rolloff 0.35
vpid 0x1842, apid 0x184d, sid 0x1856
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'

status 00 | signal   0% | snr  49% | ber 0 | unc -2 |
status 1b | signal   2% | snr   0% | ber 0 | unc -2 | FE_HAS_LOCK
status 1b | signal   2% | snr   0% | ber 2666666 | unc -2 | FE_HAS_LOCK
status 1b | signal   2% | snr   0% | ber 6666666 | unc -2 | FE_HAS_LOCK
status 1b | signal   2% | snr   0% | ber 1333333 | unc -2 | FE_HAS_LOCK
status 1b | signal   2% | snr   0% | ber 0 | unc -2 | FE_HAS_LOCK
status 1b | signal   2% | snr   0% | ber 0 | unc -2 | FE_HAS_LOCK
status 1b | signal   2% | snr   0% | ber 0 | unc -2 | FE_HAS_LOCK

(and so on)

output of mplayer
Playing /dev/dvb/adapter0/dvr0.
TS file format detected.
VIDEO MPEG2(pid=6210) AUDIO MPA(pid=6221) NO SUBS (yet)! PROGRAM N. 0

(I have to wait 2 minutes)

Too many audio packets in the buffer: (1366 in 8392704 bytes). Maybe you are playing a non-interleaved stream/file or the codec failed? For AVI files, try to force non-interleaved mode with the -ni option.
MPEG: FATAL: EOF while searching for sequence header.
Video: Cannot read properties.
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000) Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A:10567.0 ( 2:56:07.0) of -1.1 (unknown) 0.2%
A:10567.1 ( 2:56:07.0) of -1.1 (unknown) 0.2%
So no video, but only audio

If I start mplayer with mplayer -vc +ffh264 I get the same output

Only ffplay can play the channel:
3 seconds fluently,
2 seconds staggering and
after another 5 seconds my free memory (about 500M) is full and I have to kill ffplay

output of ffplay:

built on Jan 16 2009 22:23:29, gcc: 4.3.1 20080507 (prerelease)
[gcc-4_3-branch revision 135036]
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]non-existing PPS referenced
[h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]non-existing PPS referenced
[h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]non-existing PPS referenced
[h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]B picture before any references, skipping [h264 @ 0x68ac80]decode_slice_header error
[h264 @ 0x68ac80]no frame!
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one
[h264 @ 0x68ac80]number of reference frames exceeds max (probably corrupt input), discarding one

I have several HD-TV.ts-files which are played very well with all applications, so in my opinion the videooutput is not ok.

Any advices?

Regards,

Hartmut

PS: Opensuse 11.0 on AMD64, everything updated to the newest ...

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#1 lore raw
Quoted 8 lines

since 3 days I have a Technisat Skystar HD 2 in my Computer (PCI-card)

was my mail some days ago. My fault: I installed the multiproto-driver, cause I read this:

Quoted 3 lines

Mantis/S2API driver

This is the preferred driver. DVB-S2 support in the Linux kernel is provided by API version 5.0, also known as S2API (and not multiproto). This API was released in kernel version 2.6.28

please try http://mercurial.intuxication.org/hg/s2-liplianin s2api drivers

Quoted 16 lines

So I thought, I can only use this driver, if I use a kernel 2.6.28 which I do not and so I installed the multiproto-driver with part-success. But I read further and further and found out, that I was wrong. So yesterday I installed the S2API-driver with some more success. Channel-switching is very fast now and scan-s2 finds the hd-channels. I can even zap to a hd-channel, but viewing is the problem:

szap-output to a "normal" channel:

szap-s2 -a 0 -H -r -S 0 -n 373
zapping to 373 'NDR FS NDS;ARD':
delivery DVB-S, modulation QPSK
sat 0, frequency 12109 MHz H, symbolrate 27500000, coderate 3/4, rolloff 0.35
vpid 0x0a29, apid 0x0a2a, sid 0x0a2c
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'

Quoted 5 lines
status 1f | signal   0% | snr   0% | ber 0 | unc -2 | FE_HAS_LOCK
status 1f | signal   0% | snr   0% | ber 0 | unc -2 | FE_HAS_LOCK

(and so on)

mplayer-output for this channel:

please try to use another demuxer with mplayer from svn

mplayer -demuxer lavf

Quoted 3 lines

VDecoder init failed :(
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family

author
#2 lore raw
Quoted 6 lines · Goga777 schrieb:
Quoted 6 lines

since 3 days I have a Technisat Skystar HD 2 in my Computer (PCI-card)

was my mail some days ago. My fault: I installed the multiproto-driver, cause I read this:

Quoted 6 lines
Quoted 4 lines
Quoted 4 lines

Mantis/S2API driver

This is the preferred driver. DVB-S2 support in the Linux kernel is provided by API version 5.0, also known as S2API (and not multiproto). This API was released in kernel version 2.6.28

please try http://mercurial.intuxication.org/hg/s2-liplianin s2api drivers

please read the below part, that was, what I did ...

Quoted 20 lines
Quoted 20 lines

So I thought, I can only use this driver, if I use a kernel 2.6.28 which I do not and so I installed the multiproto-driver with part-success. But I read further and further and found out, that I was wrong. So yesterday I installed the S2API-driver with some more success. Channel-switching is very fast now and scan-s2 finds the hd-channels. I can even zap to a hd-channel, but viewing is the problem:

szap-output to a "normal" channel:

szap-s2 -a 0 -H -r -S 0 -n 373
zapping to 373 'NDR FS NDS;ARD':
delivery DVB-S, modulation QPSK
sat 0, frequency 12109 MHz H, symbolrate 27500000, coderate 3/4, rolloff 0.35
vpid 0x0a29, apid 0x0a2a, sid 0x0a2c
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'

status 1f | signal   0% | snr   0% | ber 0 | unc -2 | FE_HAS_LOCK
status 1f | signal   0% | snr   0% | ber 0 | unc -2 | FE_HAS_LOCK

(and so on)

Quoted 7 lines
Quoted 2 lines

mplayer-output for this channel:

please try to use another demuxer with mplayer from svn

mplayer -demuxer lavf

The output of mplayer with this option:

Playing /dev/dvb/adapter0/dvr0.
libavformat file format detected.
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]non-existing PPS referenced
[h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]non-existing PPS referenced
[h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]non-existing PPS referenced
[h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]B picture before any references, skipping [h264 @ 0x13d2370]decode_slice_header error
[h264 @ 0x13d2370]no frame!
[h264 @ 0x13d2370]number of reference frames exceeds max (probably corrupt input), discarding one
[lavf] Audio stream found, -aid 0
[lavf] Video stream found, -vid 1
VIDEO: [H264] 1280x720 0bpp 50.000 fps 0.0 kbps ( 0.0 kbyte/s)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000) Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
[h264 @ 0xc5df60]B picture before any references, skipping [h264 @ 0xc5df60]decode_slice_header error
[h264 @ 0xc5df60]no frame!
Error while decoding frame!
[h264 @ 0xc5df60]B picture before any references, skipping [h264 @ 0xc5df60]decode_slice_header error
[h264 @ 0xc5df60]no frame!
Error while decoding frame!
[h264 @ 0xc5df60]warning: first frame is no keyframe
[h264 @ 0xc5df60]Missing reference picture
VDec: vo config request - 1280 x 720 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [xv] 1280x720 => 1280x720 Planar YV12
[h264 @ 0xc5df60]error while decoding MB 10 9, bytestream (-18)% 39 0 [h264 @ 0xc5df60]concealing 2919 DC, 2919 AC, 2919 MV errors
A:15563.2 V:15564.4 A-V: -1.191 ct: -0.306 0/ 0 86% 20% 0.4% 39 0

Exiting... (End of file)