No scan with DViCo FusionHDTV DVB-T Dual Express
I'm using the DViCo card with Ubuntu 8.10amd64. I've followed the various instructions for installing drivers and firmware viz:-
loaded the drivers(v4l-dvb-b44a3aed3d1.tar.gz) as suggested on www.linuxtv.org/wiki/index.php/DViCo_FusionHDTV_DVB-T_Dual_Express <http://www.linuxtv.org/wiki/index.php/DViCo_FusionHDTV_DVB-T_Dual_Express> from linuxtv.org/hg/~stoth/v4l-dvb. I also had to load gspca_m5602.ko in /lib/modules/2.6.27-11-generic/kernel/drivers/media/video/gspca.
The card wasn't auto-loaded until I added "options cx23885 card=11" to /etc/modprobe.d/options. I obtained xc3028-v27.fw.tar.bz2 via ubuntuforums.org then copied the untarred file xc3028-v27.fw to /lib/firmware.
Dmesg on startup shows that the card is recognised:- 11.290571] cx23885 driver version 0.0.1 loaded
[ 11.290620] cx23885 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 11.291316] CORE cx23885[0]: subsystem: 0000:0000, board: DViCO FusionHDTV DVB-T Dual Express [card=11,insmod option] [ 11.569588] input: i2c IR (FusionHDTV) as /devices/virtual/input/input6 [ 11.628464] ir-kbd-i2c: i2c IR (FusionHDTV) detected at i2c-0/0-006b/ir0 [cx23885[0]] [ 11.629459] cx23885_dvb_register() allocating 1 frontend(s) [ 11.629461] cx23885[0]: cx23885 based dvb card [ 11.724553] xc2028 0-0061: creating new instance [ 11.724555] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner [ 11.724559] DVB: registering new adapter (cx23885[0]) [ 11.724561] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 11.724818] cx23885_dvb_register() allocating 1 frontend(s) [ 11.724820] cx23885[0]: cx23885 based dvb card [ 11.725365] xc2028 1-0061: creating new instance [ 11.725366] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 11.725368] DVB: registering new adapter (cx23885[0]) [ 11.725370] DVB: registering adapter 1 frontend 0 (Zarlink ZL10353 DVB-T)... [ 11.725612] cx23885_dev_checkrevision() Hardware revision = 0xb0 [ 11.725617] cx23885[0]/0: found at 0000:01:00.0, rev: 2, irq: 28, latency: 0, mmio: 0xf7e00000 [ 11.725622] cx23885 0000:01:00.0: setting latency timer to 64
Results of Dmesg after scanning with Mythtv:-
[34883.840269] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [34884.981848] xc2028 0-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [34884.995517] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [34885.025353] xc2028 0-0061: Incorrect readback of firmware version. [34885.278433] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [34886.418714] xc2028 0-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [34886.432409] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [34886.465353] xc2028 0-0061: Incorrect readback of firmware version. [34887.319906] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [34888.462715] xc2028 0-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [34888.476385] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [34888.509359] xc2028 0-0061: Incorrect readback of firmware version. [34888.762430] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [34889.901843] xc2028 0-0061: Loading firmware for type=D2633 DTV78 (110), id 0000000000000000. [34889.915511] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [34889.949353] xc2028 0-0061: Incorrect readback of firmware version.
Any ideas why I'm getting " Incorrect readback of firmware version" What have I missed/done wrong?
Thanks.........
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Hi John,
Quoted 2 lines · john knops
I'm using the DViCo card with Ubuntu 8.10amd64. I've followed the various instructions for installing drivers and firmware viz:-
loaded the drivers(v4l-dvb-b44a3aed3d1.tar.gz) as suggested on www.linuxtv.org/wiki/index.php/DViCo_FusionHDTV_DVB-T_Dual_Express <http://www.linuxtv.org/wiki/index.php/DViCo_FusionHDTV_DVB-T_Dual_Express> from linuxtv.org/hg/~stoth/v4l-dvb. I also had to load gspca_m5602.ko in/lib/modules/2.6.27-11-generic/kernel/drivers/media/video/gspca.
The wiki url points to a page that doesn't exist.
Quoted 3 lines
The card wasn't auto-loaded until I added "options cx23885 card=11" to
/etc/modprobe.d/options. I obtained xc3028-v27.fw.tar.bz2 via ubuntuforums.org then copied the untarred file xc3028-v27.fw to/lib/firmware.
It's probably a new rev of the card with a new subid, which is why you have to force load it.
What does lspci -vn look like? (Show the section specific to the cx23885).
Quoted 4 lines
[34889.915511] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [34889.949353] xc2028 0-0061: Incorrect readback of firmware version.Any ideas why I'm getting " Incorrect readback of firmware version" What have I missed/done wrong?
... and it may not have a xc3028 onboard, or may have the low power version which is why the firmware fails to load. A few other things come to mind but given that the vendor has switch subid details, it's probably best to cross reference with the wiki to ensure it still has the same parts.
Assuming the wiki entry truly doesn't exist, maybe you could create it with the newer rev details, maybe with some pictures and component details?
- Steve
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 4 lines · Steven Toth
... and it may not have a xc3028 onboard, or may have the low power version which is why the firmware fails to load. A few other things come to mind but given that the vendor has switch subid details, it's probably best to cross reference with the wiki to ensure it still has the same parts.
If it does have the low power version on board (the xc3028L), do *not* load the regular firmware or else you will burn out the chip.
Quoted 2 lines
Assuming the wiki entry truly doesn't exist, maybe you could create it with the newer rev details, maybe with some pictures and component details?
If it's a brand new board, you should definitely take some pictures before trying the regular xc3028 firmware.
Devin
Signature · 8 lines
Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 11 lines · Steven Toth
Hi John,
Quoted 2 lines · john knops
I'm using the DViCo card with Ubuntu 8.10amd64. I've followed the various instructions for installing drivers and firmware viz:-
loaded the drivers(v4l-dvb-b44a3aed3d1.tar.gz) as suggested on www.linuxtv.org/wiki/index.php/DViCo_FusionHDTV_DVB-T_Dual_Express <http://www.linuxtv.org/wiki/index.php/DViCo_FusionHDTV_DVB-T_Dual_Express> from linuxtv.org/hg/~stoth/v4l-dvb. I also had to load gspca_m5602.ko in/lib/modules/2.6.27-11-generic/kernel/drivers/media/video/gspca.The wiki url points to a page that doesn't exist.
You can get to this page via the wiki Main Page -> DVB-T Devices -> DVB-T PCIe cards - Experimental Support.Quoted 1 line
Quoted 7 lines
Quoted 2 lines
The card wasn't auto-loaded until I added "options cx23885 card=11" to
/etc/modprobe.d/options. I obtained xc3028-v27.fw.tar.bz2 via ubuntuforums.org then copied the untarred file xc3028-v27.fw to/lib/firmware.It's probably a new rev of the card with a new subid, which is why you have to force load it.
What does lspci -vn look like? (Show the section specific to the cx23885). Results of lspci -vn:-
01:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
Subsystem: DViCO Corporation Device [18ac:db78]
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at f7e00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [80] Power Management version 2
Capabilities: [90] Vital Product Data <?>
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [200] Virtual Channel <?>
Kernel driver in use: cx23885
Kernel modules: cx23885
Quoted 4 lines
Quoted 4 lines
[34889.915511] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [34889.949353] xc2028 0-0061: Incorrect readback of firmware version.
Quoted 8 lines
Quoted 1 line
Any ideas why I'm getting " Incorrect readback of firmware version" What have I missed/done wrong?
... and it may not have a xc3028 onboard, or may have the low power version which is why the firmware fails to load. A few other things come to mind but given that the vendor has switch subid details, it's probably best to cross reference with the wiki to ensure it still has the same parts.
Assuming the wiki entry truly doesn't exist, maybe you could create it with the newer rev details, maybe with some pictures and component details?
- Steve
I've e-mailed DViCo asking if there have been any recent changes to the board. I'll get photos of the board later tonight.
John..
Quoted 11 lines
______________________________________________________________________
This mail has been virus scanned and spam scanned by Australia On Line see http://www.australiaonline.net.au/spamscanningReport this email as spam...
http://reportspam.australiaonline.net.au/servlet/mail/jknops/1238509492.1368_0.mailscanner2.ozonline.com.au/reportspam
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 39 lines · john knops
Quoted 11 lines · Steven Toth
Hi John,
Quoted 2 lines · john knops
I'm using the DViCo card with Ubuntu 8.10amd64. I've followed the various instructions for installing drivers and firmware viz:-
loaded the drivers(v4l-dvb-b44a3aed3d1.tar.gz) as suggested on www.linuxtv.org/wiki/index.php/DViCo_FusionHDTV_DVB-T_Dual_Express <http://www.linuxtv.org/wiki/index.php/DViCo_FusionHDTV_DVB-T_Dual_Express> from linuxtv.org/hg/~stoth/v4l-dvb. I also had to load gspca_m5602.ko in/lib/modules/2.6.27-11-generic/kernel/drivers/media/video/gspca.The wiki url points to a page that doesn't exist.
You can get to this page via the wiki Main Page -> DVB-T Devices -> DVB-T PCIe cards - Experimental Support.Quoted 1 line
Quoted 7 lines
Quoted 2 lines
The card wasn't auto-loaded until I added "options cx23885 card=11" to
/etc/modprobe.d/options. I obtained xc3028-v27.fw.tar.bz2 via ubuntuforums.org then copied the untarred file xc3028-v27.fw to/lib/firmware.It's probably a new rev of the card with a new subid, which is why you have to force load it.
What does lspci -vn look like? (Show the section specific to the cx23885). Results of lspci -vn:-
01:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
Subsystem: DViCO Corporation Device [18ac:db78]
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory atf7e00000(64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [80] Power Management version 2
Capabilities: [90] Vital Product Data <?>
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [200] Virtual Channel <?>
Kernel driver in use: cx23885
Kernel modules: cx23885Quoted 6 lines
Quoted 5 lines
[34889.915511] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [34889.949353] xc2028 0-0061: Incorrect readback of firmware version.Any ideas why I'm getting " Incorrect readback of firmware version" What have I missed/done wrong?
Quoted 7 lines
Quoted 6 lines
... and it may not have a xc3028 onboard, or may have the low power version which is why the firmware fails to load. A few other things come to mind but given that the vendor has switch subid details, it's probably best to cross reference with the wiki to ensure it still has the same parts.
Assuming the wiki entry truly doesn't exist, maybe you could create it with the newer rev details, maybe with some pictures and component details?
- Steve
I've e-mailed DViCo asking if there have been any recent changes to the board. I'll get photos of the board later tonight.John..
More from John.
Although the card described on the wiki and the card that I own both have the same name and have Fusion DVB-T Dual Express Rev:1.1 printed on the underside, they are not identical eg:-
Wiki Card 2x Xceive 3008ACQ Mine 2x Xceive3028ACQ
Wiki Card 2x WJCE 6353 Mine 2x WJCE 6353
Wiki Conexant Cx23885 -13Z Mine Conexant Cx23885 -13Z
Wiki Card 28.636360 Kony 0703 Mine 28.636360 Kony 0741
Wiki Card 4.000000Kony 0703 Mine 4.000000Kony 0741
Wiki Card 0716Y 20.480 Mine 0720Y 20.480
I presume that this explains the problems that I am having and that I will just have to wait until if/when this particular version of the card is supported.
Quoted 5 lines
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 8 lines
______________________________________________________________________
This mail has been virus scanned and spam scanned by Australia On Line see http://www.australiaonline.net.au/spamscanningReport this email as spam...
http://reportspam.australiaonline.net.au/servlet/mail/jknops/1238564413.18072_0.mailscanner2.ozonline.com.au/reportspam
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 50 lines · john knops
Quoted 39 lines · john knops
Quoted 11 lines · Steven Toth
Hi John,
Quoted 2 lines · john knops
I'm using the DViCo card with Ubuntu 8.10amd64. I've followed the various instructions for installing drivers and firmware viz:-
loaded the drivers(v4l-dvb-b44a3aed3d1.tar.gz) as suggested on www.linuxtv.org/wiki/index.php/DViCo_FusionHDTV_DVB-T_Dual_Express <http://www.linuxtv.org/wiki/index.php/DViCo_FusionHDTV_DVB-T_Dual_Express> from linuxtv.org/hg/~stoth/v4l-dvb. I also had to load gspca_m5602.ko in/lib/modules/2.6.27-11-generic/kernel/drivers/media/video/gspca.The wiki url points to a page that doesn't exist.
You can get to this page via the wiki Main Page -> DVB-T Devices -> DVB-T PCIe cards - Experimental Support.Quoted 1 line
Quoted 7 lines
Quoted 2 lines
The card wasn't auto-loaded until I added "options cx23885 card=11" to
/etc/modprobe.d/options. I obtained xc3028-v27.fw.tar.bz2 via ubuntuforums.org then copied the untarred file xc3028-v27.fw to/lib/firmware.It's probably a new rev of the card with a new subid, which is why you have to force load it.
What does lspci -vn look like? (Show the section specific to the cx23885). Results of lspci -vn:-
01:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
Subsystem: DViCO Corporation Device [18ac:db78]
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory atf7e00000(64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [80] Power Management version 2
Capabilities: [90] Vital Product Data <?>
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [200] Virtual Channel <?>
Kernel driver in use: cx23885
Kernel modules: cx23885Quoted 6 lines
Quoted 5 lines
[34889.915511] xc2028 0-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [34889.949353] xc2028 0-0061: Incorrect readback of firmware version.Any ideas why I'm getting " Incorrect readback of firmware version" What have I missed/done wrong?
Quoted 7 lines
Quoted 6 lines
... and it may not have a xc3028 onboard, or may have the low power version which is why the firmware fails to load. A few other things come to mind but given that the vendor has switch subid details, it's probably best to cross reference with the wiki to ensure it still has the same parts.
Assuming the wiki entry truly doesn't exist, maybe you could create it with the newer rev details, maybe with some pictures and component details?
- Steve
I've e-mailed DViCo asking if there have been any recent changes to the board. I'll get photos of the board later tonight.John..
More from John.
Although the card described on the wiki and the card that I own both have the same name and have Fusion DVB-T Dual Express Rev:1.1 printed on the underside, they are not identical eg:-
Quoted 8 lines
Wiki Card 2x Xceive 3008ACQ Mine 2x Xceive3028ACQ
Wiki Card 2x WJCE 6353 Mine 2x WJCE 6353
Wiki Conexant Cx23885 -13Z Mine Conexant Cx23885 -13Z
Wiki Card 28.636360 Kony 0703 Mine 28.636360 Kony 0741
Wiki Card 4.000000Kony 0703 Mine 4.000000Kony 0741
Wiki Card 0716Y 20.480 Mine 0720Y 20.480I presume that this explains the problems that I am having and that I will just have to wait until if/when this particular version of the card is supported.
Yes and no, they're largely the same. For some reason I thought we'd used the 3028 firmware with the 3008 in the past, maybe this no longer holds. up.
I'm surprised you're seeing the "Incorrect readback of firmware version" error.
Would any xc3028 guru's like to comment?
- Steve
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 9 lines · Steven Toth
Yes and no, they're largely the same. For some reason I thought we'd used the 3028 firmware with the 3008 in the past, maybe this no longer holds. up.
I'm surprised you're seeing the "Incorrect readback of firmware version" error.
Would any xc3028 guru's like to comment?
- Steve
I would have to look at the code, but my first guess would probably be a combination of the tuner still being held in reset along with not properly detecting a the failure to read the register on the i2c bus (failing silently).
Can we get a full pastebin of the dmesg output from bootup? (the dmesg sent was truncated by the user)
Devin
Signature · 8 lines
Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 18 lines · Devin Heitmueller
Quoted 10 lines · Steven Toth
Yes and no, they're largely the same. For some reason I thought we'd used the 3028 firmware with the 3008 in the past, maybe this no longer holds. up.
I'm surprised you're seeing the "Incorrect readback of firmware version" error.
Would any xc3028 guru's like to comment?
- Steve
I would have to look at the code, but my first guess would probably be a combination of the tuner still being held in reset along with not properly detecting a the failure to read the register on the i2c bus (failing silently).
Quoted 6 lines
Can we get a full pastebin of the dmesg output from bootup? (the dmesg sent was truncated by the user)
Devin
attached are complete dmesg outputs when using both 32bit & 64bit xc3028 extracted from HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
John
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 4 lines · john knops
Quoted 4 lines
Devin
attached are complete dmesg outputs when using both 32bit & 64bit xc3028 extracted from HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
Hello John,
Just to be clear, there is no "32 bit" versus "64 bit" version of the firmware. It's the same firmware.
I think Christopher is on the right track. You should try out the patch he sent and see if it helps.
Devin
Signature · 8 lines
Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 14 lines · Devin Heitmueller
Quoted 5 lines · john knops
Quoted 5 lines
Devin
attached are complete dmesg outputs when using both 32bit & 64bit xc3028 extracted from HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
Hello John,
Just to be clear, there is no "32 bit" versus "64 bit" version of the firmware. It's the same firmware.
Quoted 6 lines
I think Christopher is on the right track. You should try out the patch he sent and see if it helps.
Devin
The patch did the trick! Sorry for the delay in replying but I wasn't too sure how to patch so I ressurected an old computer on which to practice.
Thankyou to All for your help and patience. It was very much appreciated. John
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 7 lines · john knops
Quoted 4 lines
Devin
The patch did the trick! Sorry for the delay in replying but I wasn't too sure how to patch so I ressurected an old computer on which to practice.
Thankyou to All for your help and patience. It was very much appreciated. John
This is good news.
Any volunteers to push this patch in? Christopher? Steven? If not, I will put this into a tree and issue a PULL request.
Devin
Signature · 8 lines
Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 6 lines · Devin Heitmueller
Quoted 4 lines · john knops
Quoted 4 lines
Devin
The patch did the trick! Sorry for the delay in replying but I wasn't too sure how to patch so I ressurected an old computer on which to practice.
Quoted 7 lines
Quoted 2 lines
Thankyou to All for your help and patience. It was very much appreciated. John
This is good news.
Any volunteers to push this patch in? Christopher? Steven? If not, I will put this into a tree and issue a PULL request.
Devin,
If you could save me the trouble I'd appreciate it.
- Steve
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 16 lines · Steven Toth
Quoted 15 lines · Devin Heitmueller
Quoted 9 lines · john knops
Quoted 6 lines
Devin
The patch did the trick! Sorry for the delay in replying but I wasn't too
sure how to patch so I ressurected an old computer on which to practice.Thankyou to All for your help and patience. It was very much appreciated. John
This is good news.
Quoted 9 lines
Quoted 2 lines
Any volunteers to push this patch in? Christopher? Steven? If not, I will put this into a tree and issue a PULL request.
Devin,
If you could save me the trouble I'd appreciate it.
- Steve
No problem. I will do a PULL request Sunday night when I get home.
You want to send me an Acked-By?
Regards,
Devin
Signature · 8 lines
Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list