at91: Add esd gmbh MEESC board support
Subsystems (2)
PATCH 1/1 at91: Add esd gmbh MEESC board support
This patch adds support for esd gmbh MEESC board.
The MEESC is based on an Atmel AT91SAM9263 SoC.
---
Jean-Christophe: This patch requires an up-to-date mach-types.h, please sync it.
MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/esd/meesc/Makefile | 55 +++++++++++ board/esd/meesc/config.mk | 1 + board/esd/meesc/meesc.c | 211 +++++++++++++++++++++++++++++++++++++++++++ board/esd/meesc/partition.c | 37 ++++++++ include/configs/meesc.h | 185 +++++++++++++++++++++++++++++++++++++ 8 files changed, 497 insertions(+), 0 deletions(-) create mode 100644 board/esd/meesc/Makefile create mode 100644 board/esd/meesc/config.mk create mode 100644 board/esd/meesc/meesc.c create mode 100644 board/esd/meesc/partition.c create mode 100644 include/configs/meesc.h
MAINTAINERS +4 -0
@@ -532,6 +532,10 @@ Peter Figuli <[email protected]> wepep250 xscale +Daniel Gorsulowski <[email protected]> + + meesc ARM926EJS (AT91SAM9263 SoC) + Marius Gr?ger <[email protected]> impa7 ARM720T (EP7211)
MAKEALL +1 -0
@@ -587,6 +587,7 @@ LIST_at91=" \ cmc_pu2 \ csb637 \ kb9202 \ + meesc \ mp2usb \ m501sk \ pm9263 \
Makefile +3 -0
@@ -2787,6 +2787,9 @@ at91sam9rlek_config : unconfig fi; @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 +meesc_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 + pm9263_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
board/esd/meesc/Makefile new file +55 -0
55 lines not on this page · raw message
board/esd/meesc/config.mk new file +1 -0
@@ -0,0 +1 @@ +TEXT_BASE = 0x21f00000
board/esd/meesc/meesc.c new file +211 -0
211 lines not on this page · raw message
board/esd/meesc/partition.c new file +37 -0
@@ -0,0 +1,37 @@ +/* +* (C) Copyright 2008 +* Ulf Samuelsson <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +* +*/ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS ]; + +struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS ] = { + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 ,0 },/* Logical adress, CS */ +}; + +/* define the area offsets */ +dataflash_protect_t area_list[NB_DATAFLASH_AREA ] = { + {0x00000000 ,0x000041FF ,FLAG_PROTECT_SET ,0 ,"Bootstrap" }, + {0x00004200 ,0x000083FF ,FLAG_PROTECT_CLEAR ,0 ,"Environment" }, + {0x00008400 ,0x00041FFF ,FLAG_PROTECT_SET ,0 ,"U-Boot" }, +};
include/configs/meesc.h new file +185 -0
185 lines not on this page · raw message
Signature · 1 line
1.5.3
PATCH 1/1 at91: Add esd gmbh MEESC board support
Quoted 36 lines · Daniel Gorsulowski
This patch adds support for esd gmbh MEESC board.
The MEESC is based on an Atmel AT91SAM9263 SoC.Signed-off-by Daniel Gorsulowski <[email protected]>---
Jean-Christophe: This patch requires an up-to-date
mach-types.h, please sync it.board/esd/meesc/meesc.c new file +21
-0@@ -0,0 +1,211 @@ +/* +* (C) Copyright 2007-2008 +* Stelian Pop <[email protected]> +* Lead Tech Design <www.leadtechdesign.com> +* +* (C) Copyright 2009 +* Daniel Gorsulowski <[email protected]> +* esd electronic system design gmbh <www.esd.eu> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details.
board/esd/meesc/meesc.c line 31
Quoted 10 lines
board/esd/meesc/meesc.c new file +10
-0+* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/at91sam9263_matrix.h>
please use <asm/arch/at91sam9_matrix.h>
Quoted 5 lines
board/esd/meesc/meesc.c new file +5
-0+#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/clk.h>
board/esd/meesc/meesc.c line 46
Quoted 10 lines
board/esd/meesc/meesc.c new file +10
-0+#include <asm/arch/gpio.h> +#include <asm/arch/hardware.h> +#include <asm/arch/io.h> +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR ; + +/* +* Miscelaneous platform dependent initialisations +*/
it will be better to only read it only and store it in a static
board/esd/meesc/meesc.c line 50
Quoted 3 lines
board/esd/meesc/meesc.c new file +3
-0+int get_hw_rev (void ) +{ +int rev =at91_get_gpio_value (AT91_PIN_PB19 );
please add an empty line
Quoted 10 lines
board/esd/meesc/meesc.c new file +10
-0+ rev |=at91_get_gpio_value (AT91_PIN_PB20 ) <<1 ; + rev |=at91_get_gpio_value (AT91_PIN_PB21 ) <<2 ; + rev |=at91_get_gpio_value (AT91_PIN_PB22 ) <<3 ; + +if (rev ==15 ) + rev =0 ; + +return rev; +} +
<snip>
Quoted 19 lines
board/esd/meesc/meesc.c new file +19
-0+ +int checkboard (void ) +{ +char str[32 ]; +char buf[32 ]; + +puts ("Board: esd CAN-EtherCAT Gateway" ); +if (getenv_r ("serial#" , str,sizeof (str)) >0 ) { +puts (", serial# " ); +puts (str); + } +printf ("\nHardware-revision: 1.%d\n" ,get_hw_rev ()); +printf ("Crystal frequency:\t%8s MHz\n" , +strmhz (buf,get_main_clk_rate ())); +printf ("CPU clock:\t\t%8s MHz\n" , +strmhz (buf,get_cpu_clk_rate ())); +#ifdef CONFIG_SHOW_VERBOSE_CLOCKINFO +printf ("Master clock:\t\t%8s MHz\n" , +strmhz (buf,get_mck_clk_rate ()));
board/esd/meesc/meesc.c line 178
Quoted 10 lines
board/esd/meesc/meesc.c new file +10
-0+printf ("PLL A clock:\t\t%8s MHz\n" , +strmhz (buf,get_plla_clk_rate ())); +printf ("PLL B Reg.:\t\t0x%08X\n" , +at91_sys_read (AT91_CKGR_PLLBR )); +printf ("PLL B clock:\t\t%8s MHz\n" , +strmhz (buf,get_pllb_clk_rate ())); +#endif +printf ("Mach-type: %lu\n" , gd->bd->bi_arch_number); +return 0 ; +}
please use cpu_info when it's possible to avoid copy & paste
board/esd/meesc/meesc.c line 183
Quoted 4 lines
board/esd/meesc/meesc.c new file +4
-0+int board_init (void ) +{ +/* Enable Ctrlc */ +console_init_f ();
no need
Quoted 16 lines
board/esd/meesc/meesc.c new file +16
-0+ +/* Peripheral Clock Enable Register */ +at91_sys_write (AT91_PMC_PCER ,1 <<AT91SAM9263_ID_PIOA | +1 <<AT91SAM9263_ID_PIOB | +1 <<AT91SAM9263_ID_PIOCDE | +1 <<AT91SAM9263_ID_CAN ); + +/* arch number of MEESC-Board */ + gd->bd->bi_arch_number =MACH_TYPE_MEESC ; + +/* adress of boot parameters */ + gd->bd->bi_boot_params =PHYS_SDRAM +0x100 ; + +at91_serial_hw_init (); +#ifdef CONFIG_CMD_NAND +meesc_nand_hw_init ();
board/esd/meesc/meesc.c line 209
Quoted 10 lines
board/esd/meesc/meesc.c new file +10
-0+#endif +meesc_ethercat_hw_init (); +#ifdef CONFIG_HAS_DATAFLASH +at91_spi0_hw_init (1 <<0 ); +#endif +#ifdef CONFIG_MACB +meesc_macb_hw_init (); +#endif +at91_set_A_periph (AT91_PIN_PA13 ,0 );/* CAN_TX */ +at91_set_A_periph (AT91_PIN_PA14 ,1 );/* CAN_RX */
please add a at91_can_hw_init function
board/esd/meesc/meesc.c
Quoted 2 lines
board/esd/meesc/meesc.c new file +2
-0+return 0 ; +}
<snio>
board/esd/meesc/meesc.c
Quoted 6 lines
board/esd/meesc/meesc.c new file +6
-0+ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* Common stuff */ +#define AT91_CPU_NAME "AT91SAM9263"
please remove
board/esd/meesc/meesc.c
Quoted 7 lines
board/esd/meesc/meesc.c new file +7
-0+#define CONFIG_SYS_HZ 1000/* decrementer freq */ +#define CONFIG_MEESC 1/* Board is esd MEESC */ +#define CONFIG_ARM926EJS 1/* This is an ARM926EJS Core */ +#define CONFIG_AT91SAM9263 1/* It's an AT91SAM9263 SoC */ +#define CONFIG_ENV_OVERWRITE 1/* necessary on prototypes */ +#define CONFIG_DISPLAY_BOARDINFO 1 +#define CONFIG_PREBOOT /* enable preboot variable */
why which value?
board/esd/meesc/meesc.c
Quoted 5 lines
board/esd/meesc/meesc.c new file +5
-0+#define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#undef CONFIG_USE_IRQ/* don't need IRQ/FIQ stuff */ +
Best Regards,
J.
PATCH 1/1 at91: Add esd gmbh MEESC board support
Quoted 40 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 39 lines · Daniel Gorsulowski
This patch adds support for esd gmbh MEESC board.
The MEESC is based on an Atmel AT91SAM9263 SoC.Signed-off-by Daniel Gorsulowski <[email protected]>---
Jean-Christophe: This patch requires an up-to-date
mach-types.h, please sync it.board/esd/meesc/meesc.c new file +24
-0@@ -0,0 +1,211 @@ +/* +* (C) Copyright 2007-2008 +* Stelian Pop <[email protected]> +* Lead Tech Design <www.leadtechdesign.com> +* +* (C) Copyright 2009 +* Daniel Gorsulowski <[email protected]> +* esd electronic system design gmbh <www.esd.eu> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software
Quoted 8 lines
board/esd/meesc/meesc.c line 31
Quoted 7 lines
board/esd/meesc/meesc.c new file +7
-0+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/at91sam9263_matrix.h> please use <
asm/arch/at91sam9_matrix.h>
ok
Quoted 8 lines
Quoted 8 lines
board/esd/meesc/meesc.c new file +8
-0+#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> +#include <asm/arch/hardware.h> +#include <asm/arch/io.h>
Quoted 8 lines
board/esd/meesc/meesc.c line 46
Quoted 7 lines
board/esd/meesc/meesc.c new file +7
-0+#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR ; + +/* +* Miscelaneous platform dependent initialisations +*/ it will be better to only read it only and store it in a static
I only use it once, but if you really mean, I'll change it.
Quoted 4 lines
board/esd/meesc/meesc.c line 50
Quoted 3 lines
board/esd/meesc/meesc.c new file +3
-0+int get_hw_rev (void ) +{ +int rev =at91_get_gpio_value (AT91_PIN_PB19 );please add an empty line
ok
Quoted 33 lines
Quoted 10 lines
board/esd/meesc/meesc.c new file +10
-0+ rev |=at91_get_gpio_value (AT91_PIN_PB20 ) <<1 ; + rev |=at91_get_gpio_value (AT91_PIN_PB21 ) <<2 ; + rev |=at91_get_gpio_value (AT91_PIN_PB22 ) <<3 ; + +if (rev ==15 ) + rev =0 ; + +return rev; +} +<snip>
Quoted 22 lines
board/esd/meesc/meesc.c new file +22
-0+ +int checkboard (void ) +{ +char str[32 ]; +char buf[32 ]; + +puts ("Board: esd CAN-EtherCAT Gateway" ); +if (getenv_r ("serial#" , str,sizeof (str)) >0 ) { +puts (", serial# " ); +puts (str); + } +printf ("\nHardware-revision: 1.%d\n" ,get_hw_rev ()); +printf ("Crystal frequency:\t%8s MHz\n" , +strmhz (buf,get_main_clk_rate ())); +printf ("CPU clock:\t\t%8s MHz\n" , +strmhz (buf,get_cpu_clk_rate ())); +#ifdef CONFIG_SHOW_VERBOSE_CLOCKINFO +printf ("Master clock:\t\t%8s MHz\n" , +strmhz (buf,get_mck_clk_rate ())); +printf ("PLL A clock:\t\t%8s MHz\n" , +strmhz (buf,get_plla_clk_rate ())); + printf("PLL B Reg.:\t\t0x%08X\n",
Quoted 9 lines
board/esd/meesc/meesc.c line 178
Quoted 7 lines
board/esd/meesc/meesc.c new file +7
-0+ at91_sys_read(AT91_CKGR_PLLBR)); +printf ("PLL B clock:\t\t%8s MHz\n" , +strmhz (buf,get_pllb_clk_rate ())); +#endif +printf ("Mach-type: %lu\n" , gd->bd->bi_arch_number); +return 0 ; +}please use
cpu_infowhen it's possible to avoid copy & paste
Coud you explain a few more? I can't find a function called 'cpu_info'.
Quoted 5 lines
board/esd/meesc/meesc.c line 183
Quoted 4 lines
board/esd/meesc/meesc.c new file +4
-0+int board_init (void ) +{ +/* Enable Ctrlc */ +console_init_f ();no need
Ok, I'll remove it
Quoted 19 lines
Quoted 19 lines
board/esd/meesc/meesc.c new file +19
-0+ +/* Peripheral Clock Enable Register */ +at91_sys_write (AT91_PMC_PCER ,1 <<AT91SAM9263_ID_PIOA | +1 <<AT91SAM9263_ID_PIOB | +1 <<AT91SAM9263_ID_PIOCDE | +1 <<AT91SAM9263_ID_CAN ); + +/* arch number of MEESC-Board */ + gd->bd->bi_arch_number =MACH_TYPE_MEESC ; + +/* adress of boot parameters */ + gd->bd->bi_boot_params =PHYS_SDRAM +0x100 ; + +at91_serial_hw_init (); +#ifdef CONFIG_CMD_NAND +meesc_nand_hw_init (); +#endif +meesc_ethercat_hw_init (); +#ifdef CONFIG_HAS_DATAFLASH
Quoted 8 lines
board/esd/meesc/meesc.c line 209
Quoted 7 lines
board/esd/meesc/meesc.c new file +7
-0+at91_spi0_hw_init (1 <<0 ); +#endif +#ifdef CONFIG_MACB +meesc_macb_hw_init (); +#endif +at91_set_A_periph (AT91_PIN_PA13 ,0 );/* CAN_TX */ +at91_set_A_periph (AT91_PIN_PA14 ,1 );/* CAN_RX */ please add a
at91_can_hw_initfunction
Ok, I'll do this by a separate patch
Quoted 10 lines
board/esd/meesc/meesc.c
Quoted 2 lines
board/esd/meesc/meesc.c new file +2
-0+return 0 ; +}<snio>
board/esd/meesc/meesc.c
Quoted 6 lines
board/esd/meesc/meesc.c new file +6
-0+ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* Common stuff */ +#define AT91_CPU_NAME "AT91SAM9263"please remove
ok
Quoted 8 lines
board/esd/meesc/meesc.c
Quoted 7 lines
board/esd/meesc/meesc.c new file +7
-0+#define CONFIG_SYS_HZ 1000/* decrementer freq */ +#define CONFIG_MEESC 1/* Board is esd MEESC */ +#define CONFIG_ARM926EJS 1/* This is an ARM926EJS Core */ +#define CONFIG_AT91SAM9263 1/* It's an AT91SAM9263 SoC */ +#define CONFIG_ENV_OVERWRITE 1/* necessary on prototypes */ +#define CONFIG_DISPLAY_BOARDINFO 1 +#define CONFIG_PREBOOT /* enable preboot variable */ why which value?
This is a custom value, which is set, during putting the board into operation. So it is unalterable to define CONFIG_PREBOOT
Quoted 13 lines
board/esd/meesc/meesc.c
Quoted 5 lines
board/esd/meesc/meesc.c new file +5
-0+#define CONFIG_CMDLINE_TAG 1/* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#undef CONFIG_USE_IRQ/* don't need IRQ/FIQ stuff */ +Best Regards,
J.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Best regards,
Daniel Gorsulowski
PATCH 1/1 at91: Add esd gmbh MEESC board support
Quoted 33 lines · Daniel Gorsulowski
Quoted 23 lines · Jean-Christophe PLAGNIOL-VILLARD
<snip>
Quoted 22 lines
board/esd/meesc/meesc.c new file +22
-0+ +int checkboard (void ) +{ +char str[32 ]; +char buf[32 ]; + +puts ("Board: esd CAN-EtherCAT Gateway" ); +if (getenv_r ("serial#" , str,sizeof (str)) >0 ) { +puts (", serial# " ); +puts (str); + } +printf ("\nHardware-revision: 1.%d\n" ,get_hw_rev ()); +printf ("Crystal frequency:\t%8s MHz\n" , +strmhz (buf,get_main_clk_rate ())); +printf ("CPU clock:\t\t%8s MHz\n" , +strmhz (buf,get_cpu_clk_rate ())); +#ifdef CONFIG_SHOW_VERBOSE_CLOCKINFO +printf ("Master clock:\t\t%8s MHz\n" , +strmhz (buf,get_mck_clk_rate ())); +printf ("PLL A clock:\t\t%8s MHz\n" , +strmhz (buf,get_plla_clk_rate ())); + printf("PLL B Reg.:\t\t0x%08X\n",Quoted 9 lines
board/esd/meesc/meesc.c line 178
Quoted 7 lines
board/esd/meesc/meesc.c new file +7
-0+ at91_sys_read(AT91_CKGR_PLLBR)); +printf ("PLL B clock:\t\t%8s MHz\n" , +strmhz (buf,get_pllb_clk_rate ())); +#endif +printf ("Mach-type: %lu\n" , gd->bd->bi_arch_number); +return 0 ; +}please use
cpu_infowhen it's possible to avoid copy & paste
Quoted 1 line
Coud you explain a few more? I can't find a function called '
cpu_info'.
Found config option CONFIG_DISPLAY_CPUINFO and enabled it, thank you for the hint.
Best regards,
Daniel Gorsulowski
PATCH 1/1 at91: Add esd gmbh MEESC board support
In reply to Jean-Christophe PLAGNIOL-VILLARDThis patch adds support for esd gmbh MEESC board.
The MEESC is based on an Atmel AT91SAM9263 SoC.
--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/esd/meesc/Makefile | 55 ++++++++++++ board/esd/meesc/config.mk | 1 + board/esd/meesc/meesc.c | 197 +++++++++++++++++++++++++++++++++++++++++++ board/esd/meesc/partition.c | 37 ++++++++ include/configs/meesc.h | 188 +++++++++++++++++++++++++++++++++++++++++ 8 files changed, 486 insertions(+), 0 deletions(-) create mode 100644 board/esd/meesc/Makefile create mode 100644 board/esd/meesc/config.mk create mode 100644 board/esd/meesc/meesc.c create mode 100644 board/esd/meesc/partition.c create mode 100644 include/configs/meesc.h
MAINTAINERS +4 -0
@@ -530,6 +530,10 @@ Peter Figuli <[email protected]> wepep250 xscale +Daniel Gorsulowski <[email protected]> + + meesc ARM926EJS (AT91SAM9263 SoC) + Marius Gr?ger <[email protected]> impa7 ARM720T (EP7211)
MAKEALL +1 -0
@@ -583,6 +583,7 @@ LIST_at91=" \ cmc_pu2 \ csb637 \ kb9202 \ + meesc \ mp2usb \ m501sk \ pm9261 \
Makefile +3 -0
@@ -2769,6 +2769,9 @@ at91sam9rlek_config : unconfig fi; @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 +meesc_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 + pm9261_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
board/esd/meesc/Makefile new file +55 -0
55 lines not on this page · raw message
board/esd/meesc/config.mk new file +1 -0
@@ -0,0 +1 @@ +TEXT_BASE = 0x21f00000
board/esd/meesc/meesc.c new file +197 -0
197 lines not on this page · raw message
board/esd/meesc/partition.c new file +37 -0
@@ -0,0 +1,37 @@ +/* +* (C) Copyright 2008 +* Ulf Samuelsson <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +* +*/ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS ]; + +struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS ] = { + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 ,0 },/* Logical adress, CS */ +}; + +/* define the area offsets */ +dataflash_protect_t area_list[NB_DATAFLASH_AREA ] = { + {0x00000000 ,0x000041FF ,FLAG_PROTECT_SET ,0 ,"Bootstrap" }, + {0x00004200 ,0x000083FF ,FLAG_PROTECT_CLEAR ,0 ,"Environment" }, + {0x00008400 ,0x00041FFF ,FLAG_PROTECT_SET ,0 ,"U-Boot" }, +};
include/configs/meesc.h new file +188 -0
188 lines not on this page · raw message
Signature · 1 line
1.5.3
PATCH 1/1 at91: Add esd gmbh MEESC board support
Quoted 173 lines · Daniel Gorsulowski
This patch adds support for esd gmbh MEESC board.
The MEESC is based on an Atmel AT91SAM9263 SoC.Signed-off-by Daniel Gorsulowski <[email protected]>--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/esd/meesc/Makefile | 55 ++++++++++++ board/esd/meesc/config.mk | 1 + board/esd/meesc/meesc.c | 197 +++++++++++++++++++++++++++++++++++++++++++ board/esd/meesc/partition.c | 37 ++++++++ include/configs/meesc.h | 188 +++++++++++++++++++++++++++++++++++++++++ 8 files changed, 486 insertions(+), 0 deletions(-) create mode 100644 board/esd/meesc/Makefile create mode 100644 board/esd/meesc/config.mk create mode 100644 board/esd/meesc/meesc.c create mode 100644 board/esd/meesc/partition.c create mode 100644 include/configs/meesc.hMAINTAINERS +4
-0@@ -530,6 +530,10 @@ Peter Figuli <[email protected]> wepep250 xscale +Daniel Gorsulowski <[email protected]> + + meesc ARM926EJS (AT91SAM9263 SoC) + Marius Gr?ger <[email protected]> impa7 ARM720T (EP7211)MAKEALL +1
-0@@ -583,6 +583,7 @@ LIST_at91=" \ cmc_pu2 \ csb637 \ kb9202 \ + meesc \ mp2usb \ m501sk \ pm9261 \Makefile +3
-0@@ -2769,6 +2769,9 @@ at91sam9rlek_config : unconfig fi; @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 +meesc_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 + pm9261_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91board/esd/meesc/Makefile new file +55
-0@@ -0,0 +1,55 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <[email protected]> +# Lead Tech Design <www.leadtechdesign.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += $(BOARD).o +COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################board/esd/meesc/config.mk new file +1
-0@@ -0,0 +1 @@ +TEXT_BASE = 0x21f00000board/esd/meesc/meesc.c new file +38
-0@@ -0,0 +1,197 @@ +/* +* (C) Copyright 2007-2008 +* Stelian Pop <[email protected]> +* Lead Tech Design <www.leadtechdesign.com> +* +* (C) Copyright 2009 +* Daniel Gorsulowski <[email protected]> +* esd electronic system design gmbh <www.esd.eu> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/at91sam9_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> +#include <asm/arch/hardware.h>
board/esd/meesc/meesc.c line 48
Quoted 10 lines
board/esd/meesc/meesc.c new file +10
-0+#include <asm/arch/io.h> +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR ; + +/* +* Miscelaneous platform dependent initialisations +*/ + +
you miss my point here
as if you can use the get_hw_rev multiple time then please do something like thie
static int hw_rev = -1; /* hardware revision */
int get_hw_rev(void)
{
if (hw_rev >= 0)
return hw_rev;
hw_rev = at91_get_gpio_value(AT91_PIN_PB19);
hw_rev |= at91_get_gpio_value(AT91_PIN_PB20) << 1;
hw_rev |= at91_get_gpio_value(AT91_PIN_PB21) << 2;
hw_rev |= at91_get_gpio_value(AT91_PIN_PB22) << 3;
if (hw_rev == 15)
hw_rev = 0;
return hw_rev;
}Quoted 1 line
board/esd/meesc/meesc.c new file +1
-0+
<snip>
Quoted 8 lines
board/esd/meesc/meesc.c new file +8
-0+#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#undef CONFIG_RESET_PHY_R + +#define CONFIG_SYS_LOAD_ADDR 0x22000000/* load address */ +
board/esd/meesc/meesc.c
Quoted 10 lines
board/esd/meesc/meesc.c new file +10
-0+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END 0x21e00000 + +#define CONFIG_SYS_USE_DATAFLASH 1 +#undef CONFIG_SYS_USE_NANDFLASH + +#ifdef CONFIG_SYS_USE_DATAFLASH + +/* CAN */ +#define CONFIG_CAN 1
CONFIG_AT91_CAN will be better as the code is at91 specific
Best Regards,
J.
PATCH 1/2 at91: Add CAN init function
To enable CAN init, CONFIG_CAN has to be defined in the board config file and at91_can_hw_init() has to be called in the board specific code.
CAN is available on AT91SAM9263 and AT91CAP9 SoC.
--- cpu/arm926ejs/at91/at91cap9_devices.c | 15 +++++++++++++++ cpu/arm926ejs/at91/at91sam9263_devices.c | 15 +++++++++++++++ include/asm-arm/arch-at91/at91_common.h | 1 + 3 files changed, 31 insertions(+), 0 deletions(-)
cpu/arm926ejs/at91/at91cap9_devices.c +15 -0
@@ -3,6 +3,10 @@* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * +* (C) Copyright 2009 +* Daniel Gorsulowski <[email protected]> +* esd electronic system design gmbh <www.esd.eu> +* * See file CREDITS for list of people who contributed to this * project. *
@@ -174,3 +178,14 @@ void at91_macb_hw_init(void) #endif }#endif + +#ifdef CONFIG_AT91_CAN +void at91_can_hw_init (void ) +{ +at91_set_A_periph (AT91_PIN_PA12 ,0 );/* CAN_TX */ +at91_set_A_periph (AT91_PIN_PA13 ,1 );/* CAN_RX */ + +/* Enable clock */ +at91_sys_write (AT91_PMC_PCER ,1 <<AT91CAP9_ID_CAN ); +} +#endif
cpu/arm926ejs/at91/at91sam9263_devices.c +15 -0
@@ -3,6 +3,10 @@* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * +* (C) Copyright 2009 +* Daniel Gorsulowski <[email protected]> +* esd electronic system design gmbh <www.esd.eu> +* * See file CREDITS for list of people who contributed to this * project. *
@@ -182,3 +186,14 @@ void at91_uhp_hw_init(void) at91_set_gpio_output(AT91_PIN_PA24, 0); }#endif + +#ifdef CONFIG_AT91_CAN +void at91_can_hw_init (void ) +{ +at91_set_A_periph (AT91_PIN_PA13 ,0 );/* CAN_TX */ +at91_set_A_periph (AT91_PIN_PA14 ,1 );/* CAN_RX */ + +/* Enable clock */ +at91_sys_write (AT91_PMC_PCER ,1 <<AT91SAM9263_ID_CAN ); +} +#endif
include/asm-arm/arch-at91/at91_common.h +1 -0
@@ -25,6 +25,7 @@#ifndef AT91_COMMON_H #define AT91_COMMON_H +void at91_can_hw_init (void );void at91_macb_hw_init (void );void at91_serial_hw_init (void );void at91_serial0_hw_init (void );
Signature · 1 line
1.5.3
PATCH 2/2 at91: Add esd gmbh MEESC board support
This patch adds support for esd gmbh MEESC board.
The MEESC is based on an Atmel AT91SAM9263 SoC.
--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/esd/meesc/Makefile | 55 ++++++++++++ board/esd/meesc/config.mk | 1 + board/esd/meesc/meesc.c | 198 +++++++++++++++++++++++++++++++++++++++++++ board/esd/meesc/partition.c | 37 ++++++++ include/configs/meesc.h | 188 ++++++++++++++++++++++++++++++++++++++++ 8 files changed, 487 insertions(+), 0 deletions(-) create mode 100644 board/esd/meesc/Makefile create mode 100644 board/esd/meesc/config.mk create mode 100644 board/esd/meesc/meesc.c create mode 100644 board/esd/meesc/partition.c create mode 100644 include/configs/meesc.h
MAINTAINERS +4 -0
@@ -530,6 +530,10 @@ Peter Figuli <[email protected]> wepep250 xscale +Daniel Gorsulowski <[email protected]> + + meesc ARM926EJS (AT91SAM9263 SoC) + Marius Gr?ger <[email protected]> impa7 ARM720T (EP7211)
MAKEALL +1 -0
@@ -583,6 +583,7 @@ LIST_at91=" \ cmc_pu2 \ csb637 \ kb9202 \ + meesc \ mp2usb \ m501sk \ pm9261 \
Makefile +3 -0
@@ -2769,6 +2769,9 @@ at91sam9rlek_config : unconfig fi; @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 +meesc_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 + pm9261_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
board/esd/meesc/Makefile new file +55 -0
55 lines not on this page · raw message
board/esd/meesc/config.mk new file +1 -0
@@ -0,0 +1 @@ +TEXT_BASE = 0x21f00000
board/esd/meesc/meesc.c new file +198 -0
198 lines not on this page · raw message
board/esd/meesc/partition.c new file +37 -0
@@ -0,0 +1,37 @@ +/* +* (C) Copyright 2008 +* Ulf Samuelsson <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +* +*/ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS ]; + +struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS ] = { + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 ,0 },/* Logical adress, CS */ +}; + +/* define the area offsets */ +dataflash_protect_t area_list[NB_DATAFLASH_AREA ] = { + {0x00000000 ,0x000041FF ,FLAG_PROTECT_SET ,0 ,"Bootstrap" }, + {0x00004200 ,0x000083FF ,FLAG_PROTECT_CLEAR ,0 ,"Environment" }, + {0x00008400 ,0x00041FFF ,FLAG_PROTECT_SET ,0 ,"U-Boot" }, +};
include/configs/meesc.h new file +188 -0
188 lines not on this page · raw message
Signature · 1 line
1.5.3
PATCH 2/2 at91: Add esd gmbh MEESC board support
Quoted 4 lines · Daniel Gorsulowski
This patch adds support for esd gmbh MEESC board.
The MEESC is based on an Atmel AT91SAM9263 SoC.Signed-off-by Daniel Gorsulowski <[email protected]>
Quoted 15 lines
--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/esd/meesc/Makefile | 55 ++++++++++++ board/esd/meesc/config.mk | 1 + board/esd/meesc/meesc.c | 198 +++++++++++++++++++++++++++++++++++++++++++ board/esd/meesc/partition.c | 37 ++++++++ include/configs/meesc.h | 188 ++++++++++++++++++++++++++++++++++++++++ 8 files changed, 487 insertions(+), 0 deletions(-) create mode 100644 board/esd/meesc/Makefile create mode 100644 board/esd/meesc/config.mk create mode 100644 board/esd/meesc/meesc.c create mode 100644 board/esd/meesc/partition.c create mode 100644 include/configs/meesc.h
Applied to u-boot-arm
Best Regards,
J.
PATCH 1/2 at91: Add CAN init function
In reply to Daniel GorsulowskiQuoted 11 lines · Daniel Gorsulowski
To enable CAN init,
CONFIG_CANhas to be defined in the board config file andat91_can_hw_init()has to be called in the board specific code.CAN is available on AT91SAM9263 and AT91CAP9 SoC.
Signed-off-by Daniel Gorsulowski <[email protected]>--- cpu/arm926ejs/at91/at91cap9_devices.c | 15 +++++++++++++++ cpu/arm926ejs/at91/at91sam9263_devices.c | 15 +++++++++++++++ include/asm-arm/arch-at91/at91_common.h | 1 + 3 files changed, 31 insertions(+), 0 deletions(-)
Applied to u-boot-arm
Best Regards,
J.