Poseidon Board Support (Vivek)
A message that is not in the archive (sent off-list or not yet received): 1349486.263331246528227099.JavaMail.weblogic@epml17
cover Poseidon Board Support (Vivek)
Do you have a link to the announcement of the board ? Is it publically available ?
Tom
Quoted 35 lines · VIVEK DALAL
Hi Tom
Quoted 5 lines · On Jul 02, 2009 00:18 (GMT+09:00) Tom.Rix at windriver.com wrote :
A large part of your changes are reorganizing omap24xx support. Have you looked at how it is already done in omapzoom ?
git://git.omapzoom.org/repo/uboot.git
I believe omapzoom does it better.--- Thats one way you can do it. Other way is what I did. Rather then adding seperate files(in
include/asm-arm/arch-omap24xx/folder) for omap2430, what have been done in omapzoom/repo/uboot.git i.e omap2420.,omap2430.h,clock.h,clock242x.h,clock243x.hetc. Its better to use #define and put the processor specific code in those macros and make the file names generic. Imagine the scenerio, if there would be 5 processors based on arm1136.Quoted 3 lines
These changes are likely going to conflict with my recent i2c patch
http://lists.denx.de/pipermail/u-boot/2009-June/055071.html---I think you are only modifying
i2c.hfile ininclude/asm-arm/arch-omap24xx/folder. So thats the only conflicting file between your patch and my patch. In that file I have changed only two lines i.e
-#defineI2C_BASE0x48070000(quoted diff) +3
-1-#define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */ +/* I2C base */ +#define I2C_BASE (OMAP24XX_L4_IO_BASE + 0x70000) +#define I2C_BASE2 (OMAP24XX_L4_IO_BASE + 0x72000)This minimal change will not be heavy when re-basing.
Regards
Vivek Dalal