Skip to content

Poseidon Board Support (Vivek)

Tom u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 6 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 6 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/6] Poseidon Board Support (Vivek)

Do you have a link to the announcement of the board ? Is it publically available ?
Tom

Quoted 35 lines · VIVEK DALAL

Hi Tom

Quoted 5 lines · On Jul 02, 2009 00:18 (GMT+09:00) Tom.Rix at windriver.com wrote :

A large part of your changes are reorganizing omap24xx support. Have you looked at how it is already done in omapzoom ?
git://git.omapzoom.org/repo/uboot.git
I believe omapzoom does it better.

--- Thats one way you can do it. Other way is what I did. Rather then adding seperate files(in include/asm-arm/arch-omap24xx/ folder) for omap2430, what have been done in omapzoom/repo/uboot.git i.e omap2420., omap2430.h, clock.h, clock242x.h, clock243x.h etc. Its better to use #define and put the processor specific code in those macros and make the file names generic. Imagine the scenerio, if there would be 5 processors based on arm1136.

Quoted 3 lines

These changes are likely going to conflict with my recent i2c patch
http://lists.denx.de/pipermail/u-boot/2009-June/055071.html

---I think you are only modifying i2c.h file in include/asm-arm/arch-omap24xx/ folder. So thats the only conflicting file between your patch and my patch. In that file I have changed only two lines i.e
-#define I2C_BASE 0x48070000

(quoted diff) +3 -1
-#define I2C_BASE2               0x48072000 /* nothing hooked up on h4 */
+/* I2C base */
+#define I2C_BASE                (OMAP24XX_L4_IO_BASE + 0x70000)
+#define I2C_BASE2               (OMAP24XX_L4_IO_BASE + 0x72000)

This minimal change will not be heavy when re-basing.

Regards
Vivek Dalal