Skip to contentSkip to conversation

Changing serial port and sending arbitrary data over serial interface

U-Boot Matthias Weisser 1 participant 1 message Aug 3, 2009

lore
Share & tools
lore
#0 lore raw

Hi

I am currently in the process of reworking my patches to bring my u-boot port into the official git.
All my work is based on latest head.

Now I came to a point where I don't know how to do it and also didn't find any board doing the same thing.

My system has six NS16550 serial ports where u-boot only needs to deal with three of them. So I defined:

#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK CONFIG_JADE_IOCLK
#define
CONFIG_SYS_NS16550_COM1 0xfffe1000 /*
UART 0 */
#define
CONFIG_SYS_NS16550_COM2 0xfffe2000 /*
UART 1 */
#define
CONFIG_SYS_NS16550_COM3 0xfff50000 /*
UART 2 (SP) */

#define CONFIG_CONS_INDEX 1

The default is that u-boot uses COM1. Under some circumstances COM2 has to be used.
So the question is: How to switch (dynamically) between the console input/output?

I also have to send some arbitrary data to COM3 depending on some environment variables. These are
commands to a small processor on the same board which will then switches some devices on which I need
for further booting.

Matthias Wei?er

------------------------------------
Amtsgericht Freiburg HRA 602707
Ust. ID-Nr.: DE232464428

Gesch?ftsf?hrer:
Dipl. Ing. (FH) Martin Graf
Dipl. Ing. (FH) David Graf
Dipl. Inf. Fabian Graf

Komplement?rin:
GRAF-SYTECO Verwaltungs-GmbH
Amtsgericht Freiburg HRB 602868
------------------------------------