Changing serial port and sending arbitrary data over serial interface
Hi
I am currently in the process of reworking my patches to bring my u-boot port into the official git.
All my work is based on latest head.
Now I came to a point where I don't know how to do it and also didn't find any board doing the same thing.
My system has six NS16550 serial ports where u-boot only needs to deal with three of them. So I defined:
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK CONFIG_JADE_IOCLK
#defineCONFIG_SYS_NS16550_COM1 0xfffe1000 /*
UART 0 */
#defineCONFIG_SYS_NS16550_COM2 0xfffe2000 /*
UART 1 */
#defineCONFIG_SYS_NS16550_COM3 0xfff50000 /*
UART 2 (SP) */
#define CONFIG_CONS_INDEX 1
The default is that u-boot uses COM1. Under some circumstances COM2 has to be used.
So the question is: How to switch (dynamically) between the console input/output?
I also have to send some arbitrary data to COM3 depending on some environment variables. These are
commands to a small processor on the same board which will then switches some devices on which I need
for further booting.
Matthias Wei?er
------------------------------------
Amtsgericht Freiburg HRA 602707
Ust. ID-Nr.: DE232464428
Gesch?ftsf?hrer:
Dipl. Ing. (FH) Martin Graf
Dipl. Ing. (FH) David Graf
Dipl. Inf. Fabian Graf
Komplement?rin:
GRAF-SYTECO Verwaltungs-GmbH
Amtsgericht Freiburg HRB 602868
------------------------------------