Skip to contentSkip to conversation

[U-Boot] [Fwd: Re: mpc8315 DDR2 controller]

U-Boot Marcos Cunha 1 participant 1 message Aug 31, 2009

lore
Share & tools
lore
#0 lore raw

Dears,

I found the problem.

The reference board (MPC8315ERDB) has 128MB DDR2. The new design has 256MB DDR2. I chanced the size macros in \incluce\configs\MPC8315E.h

#define CFG_DDR_SIZE 256 /* MB */
#define CFG_DDR_CS0_BNDS 0x0000000F

But I forgot change MMU configurations. Below the correct configuration.

#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M| BATU_VS | BATU_VP)

Thanks,

Marcos Cunha
Electrical Engineer

Quoted 21 lines · Wolfgang Denk

Dear Marcos Cunha,

Quoted 4 lines · In message <[email protected]> you wrote:

I am using u-boot 1.2.0 for mpc8315e processor with BDI2000 debugger in a new design based on MPC8315ERDB. Our board has a different DDR2 and Flash memory. The flash memory works fine. The problem could be DDR2.

U-Boot 1.2.0 is more than 2 years old.

You really should not use such ancient stuff for a new design.

You get the expected reply: please update, use current code and try again. If the problem still persists, please report back.

Best regards,

Wolfgang Denk

Signature · 49 lines
cid:image002.gif at 01C8B04F.DE139770

*Marcos Aur?lio pinto cunha, PMP
Engenheiro eletricista / electrical engineer
***

cid:image002.gif at 01C8B04F.DE139770

cid:image003.gif at 01C8B04F.DE139770

	

Fone: +55 (85) 3216.7934
Fax: +55 (85) 3216.7864

Skype: marcos.cunha.ufc


*ISO 9001 : 2000 - CMMI3***

	

*www.atlantico.com.br <http://www.atlantico.com.br>***


-- 
cid:image002.gif at 01C8B04F.DE139770

*Marcos Aur?lio pinto cunha, PMP
Engenheiro eletricista / electrical engineer
***

cid:image002.gif at 01C8B04F.DE139770

cid:image003.gif at 01C8B04F.DE139770

	

Fone: +55 (85) 3216.7934
Fax: +55 (85) 3216.7864

Skype: marcos.cunha.ufc


*ISO 9001 : 2000 - CMMI3***

	

*www.atlantico.com.br <http://www.atlantico.com.br>***