Skip to contentSkip to conversation

SMART causes disks to go offline on an LSI SAS 1068 controller

DISCUSSION Richard Scobie 3 participants 3 messages Sep 14, 2009 – Sep 23, 2009 SCSI

lore
Share & tools
lore
#0 lore raw
Quoted 3 lines · Gabor Gombas

I'm having problems when using smartmontools with SATA disks behind an LSI SAS controller. The machine is a Dell PowerEdge 1950-II, the controller in question:

<snip>

Quoted 1 line

Is this a kernel bug (2.6.22 at least did not drop the disks), or a bug in smartmontools?

It is possibly a smartmontools build issue - it does not like -pie or -fpie compiler flags.

See: https://bugzilla.redhat.com/show_bug.cgi?id=452389

and I reported it on the smartmontools list, but there was no resolution that I am aware of.

Regards,

Richard

#1 lore raw

Hi!

(Please Cc: me, I'm not subscribed)

Quoted 7 lines

It is possibly a smartmontools build issue - it does not like -pie or -fpie compiler flags.

See: https://bugzilla.redhat.com/show_bug.cgi?id=452389

and I reported it on the smartmontools list, but there was no resolution that I am aware of.

I've seen that report but according to the buildd logs at
https://buildd.debian.org/fetch.cgi?pkg=smartmontools;ver=5.38%2Bsvn2879-4;arch=amd64;stamp=1252352014
Debian does not use -pie or -fpie.

Also, the 2.6.22 kernel did not drop the disks using the same smart binaries (version 5.38 at that time), so something must have changed on the kernel side too.

Gabor

Signature · 4 lines
     ---------------------------------------------------------
     MTA SZTAKI Computer and Automation Research Institute
                Hungarian Academy of Sciences
     ---------------------------------------------------------
#2 lore raw

I have had this problem on various machines running Fedora 11 2.6.29 kernels.

It went away recently with kernel-2.6.30.5-43.fc11.x86_64

Pim