SMART causes disks to go offline on an LSI SAS 1068 controller
Quoted 3 lines · Gabor Gombas
I'm having problems when using smartmontools with SATA disks behind an LSI SAS controller. The machine is a Dell PowerEdge 1950-II, the controller in question:
<snip>
Quoted 1 line
Is this a kernel bug (2.6.22 at least did not drop the disks), or a bug in smartmontools?
It is possibly a smartmontools build issue - it does not like -pie or -fpie compiler flags.
See: https://bugzilla.redhat.com/show_bug.cgi?id=452389
and I reported it on the smartmontools list, but there was no resolution that I am aware of.
Regards,
Richard
Hi!
(Please Cc: me, I'm not subscribed)
Quoted 7 lines
It is possibly a smartmontools build issue - it does not like -pie or -fpie compiler flags.
See: https://bugzilla.redhat.com/show_bug.cgi?id=452389
and I reported it on the smartmontools list, but there was no resolution that I am aware of.
I've seen that report but according to the buildd logs at
https://buildd.debian.org/fetch.cgi?pkg=smartmontools;ver=5.38%2Bsvn2879-4;arch=amd64;stamp=1252352014
Debian does not use -pie or -fpie.
Also, the 2.6.22 kernel did not drop the disks using the same smart binaries (version 5.38 at that time), so something must have changed on the kernel side too.
Gabor
Signature · 4 lines
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------I have had this problem on various machines running Fedora 11 2.6.29 kernels.
It went away recently with kernel-2.6.30.5-43.fc11.x86_64
Pim