add TI DA8xx support: Add DA8xx cpu functions
PATCH v3 2/4 add TI DA8xx support: Add DA8xx cpu functions
Provides initial support for TI OMAP-L1x/DA8xx SoC devices. See http://www.ti.com
Provides:
Low level initialisation.
System clock API.
Timer control.
Signed-off-by Nick Thompson <[email protected]>
---
Applies to u-boot-ti
cpu/arm926ejs/davinci/cpu.c +39 -1
@@ -23,7 +23,7 @@#include <common.h> #include <netdev.h> #include <asm/arch/hardware.h> - +#include <asm/io.h> /* offsets from PLL controller base */ #define PLLC_PLLCTL 0x100
@@ -60,6 +60,44 @@#define DDR_PLLDIV PLLC_PLLDIV1#endif +#ifdef CONFIG_SOC_DA8XX +const unsigned int const sysdiv[9 ] = { +PLL0_DIV1 ,PLL0_DIV2 ,PLL0_DIV3 ,PLL0_DIV4 , +PLL0_DIV5 ,PLL0_DIV6 ,PLL0_DIV7 ,PLL0_DIV8 , +PLL0_DIV9 +}; + +int clk_get (unsigned int id) +{ +int pre_div = (readl (PLL0_PREDIV ) &0xff ) +1 ; +int pllm =readl (PLL0_PLLM ) +1 ; +int post_div = (readl (PLL0_POSTDIV ) &0xff ) +1 ; +int pll_out =CONFIG_SYS_OSCIN_FREQ ; + +if (id ==DAVINCI_AUXCLK_CLKID ) + goto out; + +/* +* Lets keep this simple. Combining operations can result in +* unexpected approximations +*/ + pll_out /= pre_div; + pll_out *= pllm; + +if (id ==DAVINCI_PLLM_CLKID ) + goto out; + + pll_out /= post_div; + +if (id ==DAVINCI_PLLC_CLKID ) + goto out; + + pll_out /= (readl (sysdiv[id -1 ]) &0xff ) +1 ; + +out: +return pll_out; +} +#endif /* CONFIG_SOC_DA8XX */ #ifdef CONFIG_DISPLAY_CPUINFO
cpu/arm926ejs/davinci/psc.c +32 -11
75 lines not on this page · raw message