add TI DA8xx support: Add new directory for da830evm board
PATCH v4 3/4 add TI DA8xx support: Add new directory for da830evm board
From: Sekhar Nori <[email protected]>
Add new directory for da830evm board
Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/
Provides:
Initial boot and configuration.
Support for i2c.
UART support (console).
---
Applies to u-boot-ti
board/davinci/da830evm/Makefile | 51 +++++++++++++++ board/davinci/da830evm/config.mk | 43 +++++++++++++ board/davinci/da830evm/da830evm.c | 127 +++++++++++++++++++++++++++++++++++++ 3 files changed, 221 insertions(+), 0 deletions(-)
board/davinci/da830evm/Makefile new file +51 -0
@@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := da830evm.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak *~ .depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
board/davinci/da830evm/config.mk new file +43 -0
43 lines not on this page · raw message
board/davinci/da830evm/da830evm.c new file +127 -0
127 lines not on this page · raw message
PATCH v4 3/4 add TI DA8xx support: Add new directory for da830evm board
Quoted 167 lines · Nick Thompson
From: Sekhar Nori <[email protected]>
Add new directory for da830evm board
Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/
Provides:
Initial boot and configuration.
Support for i2c.
UART support (console).Signed-off-by Nick Thompson <[email protected]>---
Applies to u-boot-tiboard/davinci/da830evm/Makefile | 51 +++++++++++++++ board/davinci/da830evm/config.mk | 43 +++++++++++++ board/davinci/da830evm/da830evm.c | 127 +++++++++++++++++++++++++++++++++++++ 3 files changed, 221 insertions(+), 0 deletions(-)board/davinci/da830evm/Makefile new file +51
-0@@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := da830evm.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak *~ .depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################board/davinci/da830evm/config.mk new file +43
-0@@ -0,0 +1,43 @@ +# +# (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/ +# +# Copyright (C) 2007 Sergey Kubushyn <[email protected]> +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <[email protected]> +# David Mueller, ELSOFT AG, <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Texas Instruments DA8xx EVM board (ARM925EJS) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# DA8xx EVM has 1 bank of 64 MB SDRAM (2 16Meg x16 chips). +# Physical Address: +# C000'0000 to C400'0000 +# +# Linux-Kernel is expected to be at C000'8000, entry C000'8000 +# (mem base + reserved) +# +# we load ourself to C108 '0000 + + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0xC1080000board/davinci/da830evm/da830evm.c new file +34
-0@@ -0,0 +1,127 @@ +/* +* Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <[email protected]> +* +* Base on code from TI. Original Notices follow: +* +* (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/ +* +* Modified for DA8xx EVM. +* +* Copyright (C) 2007 Sergey Kubushyn <[email protected]> +* +* Parts are shamelessly stolen from various TI sources, original copyright +* follows: +* ----------------------------------------------------------------- +* +* Copyright (C) 2004 Texas Instruments. +* +* ---------------------------------------------------------------------------- +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +* ---------------------------------------------------------------------------- +*/ +
board/davinci/da830evm/da830evm.c line 44
Quoted 10 lines
board/davinci/da830evm/da830evm.c new file +10
-0+#include <common.h> +#include <i2c.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> +#include "../common/misc.h" + +DECLARE_GLOBAL_DATA_PTR ; + +#define PINMUX &DAVINCI_SYSCFG_REGS->pinmux +
Lowercase variables
Apply globally.
Else looks fine.
Tom
Quoted 87 lines
board/davinci/da830evm/da830evm.c new file +83
-0+#ifdef CONFIG_SPI_FLASH +/* SPI0 pin muxer settings */ +const struct pinmux_config spi0_pins[] = { + {PINMUX [7 ],1 ,3 }, + {PINMUX [7 ],1 ,4 }, + {PINMUX [7 ],1 ,5 }, + {PINMUX [7 ],1 ,6 }, + {PINMUX [7 ],1 ,7 } +}; +#endif + +/* UART pin muxer settings */ +const struct pinmux_config uart_pins[] = { + {PINMUX [8 ],2 ,7 }, + {PINMUX [9 ],2 ,0 } +}; + +/* I2C pin muxer settings */ +const struct pinmux_config i2c_pins[] = { + {PINMUX [9 ],2 ,3 }, + {PINMUX [9 ],2 ,4 } +}; + +int board_init (void ) +{ +#ifndef CONFIG_USE_IRQ +/* +* Mask all IRQs by clearing the global enable and setting +* the enable clear for all the 90 interrupts. +*/ + +writel (0 , &DAVINCI_AINTC_REGS ->ger); + +writel (0 , &DAVINCI_AINTC_REGS ->hier); + +writel (0xffffffff , &DAVINCI_AINTC_REGS ->ecr1); +writel (0xffffffff , &DAVINCI_AINTC_REGS ->ecr2); +writel (0xffffffff , &DAVINCI_AINTC_REGS ->ecr3); +#endif + +/* arch number of the board */ + gd->bd->bi_arch_number =MACH_TYPE_DAVINCI_DA830_EVM ; + +/* address of boot parameters */ + gd->bd->bi_boot_params =LINUX_BOOT_PARAM_ADDR ; + +/* +* Power on required peripherals +* ARM does not have access by default to PSC0 and PSC1 +* assuming here that the DSP bootloader has set the IOPU +* such that PSC access is available to ARM +*/ +lpsc_on (DAVINCI_LPSC_AEMIF );/* NAND, NOR */ +lpsc_on (DAVINCI_LPSC_SPI0 );/* Serial Flash */ +lpsc_on (DAVINCI_LPSC_EMAC );/* image download */ +lpsc_on (DAVINCI_LPSC_UART2 );/* console */ +lpsc_on (DAVINCI_LPSC_GPIO ); + +/* setup the SUSPSRC for ARM to control emulation suspend */ +writel (readl (&DAVINCI_SYSCFG_REGS ->suspsrc) & + ~(DAVINCI_SYSCFG_SUSPSRC_EMAC |DAVINCI_SYSCFG_SUSPSRC_I2C | +DAVINCI_SYSCFG_SUSPSRC_SPI0 |DAVINCI_SYSCFG_SUSPSRC_TIMER0 | +DAVINCI_SYSCFG_SUSPSRC_UART2 ), + &DAVINCI_SYSCFG_REGS ->suspsrc); + +#ifdef CONFIG_SPI_FLASH +if (davinci_configure_pin_mux (spi0_pins,ARRAY_SIZE (spi0_pins)) !=0 ) +return 1 ; +#endif + +if (davinci_configure_pin_mux (uart_pins,ARRAY_SIZE (uart_pins)) !=0 ) +return 1 ; + +if (davinci_configure_pin_mux (i2c_pins,ARRAY_SIZE (i2c_pins)) !=0 ) +return 1 ; + +/* enable the console UART */ +writel ((DAVINCI_UART_PWREMU_MGMT_FREE |DAVINCI_UART_PWREMU_MGMT_URRST | +DAVINCI_UART_PWREMU_MGMT_UTRST ), + &DAVINCI_UART2_CTRL_REGS ->pwremu_mgmt); + +return (0 ); +}_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot