OMAP3:DDR timing cleanup series
A message that is not in the archive (sent off-list or not yet received): OMAP3 DDR Fix patches (was Re: [U-Boot] [PATCH 1/5 v2] OMAP3: Fix
SDRC init)
A message that is not in the archive (sent off-list or not yet received): OMAP3 DDR Fix patches (was Re: [U-Boot] [PATCH 1/5 v2] OMAP3:
Fix SDRC init)
cover OMAP3:DDR timing cleanup series
Hi,
in continuation of the discussion on:
http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page=y
the following patch set should introduce DDR timing changes for MICRON and INFINEON DDRs and allow both classes of boards to live happily together
Tested ON:
SDP3430 - type INFENINION
BeagleBoard - type MICRON
tested with mtest 0x82000000 0x83000000 1 from u-boot prompt
Nishanth Menon (2):
OMAP3:SDRC: Cleanup references to SDP OMAP3:SDRC: introduce DDR types
cpu/arm_cortexa8/omap3/mem.c | 2 +- cpu/arm_cortexa8/omap3/sys_info.c | 2 +- include/asm-arm/arch-omap3/mem.h | 97 +++++++++++++++++++++++++++---------- include/configs/devkit8000.h | 3 + include/configs/omap3_beagle.h | 3 + include/configs/omap3_evm.h | 3 + include/configs/omap3_overo.h | 3 + include/configs/omap3_pandora.h | 3 + include/configs/omap3_sdp3430.h | 3 + include/configs/omap3_zoom1.h | 3 + include/configs/omap3_zoom2.h | 3 + 11 files changed, 97 insertions(+), 28 deletions(-)
PATCH 1/2 OMAP3:SDRC: Cleanup references to SDP
Remove SDP referenced unused defines
--- cpu/arm_cortexa8/omap3/mem.c | 2 +- cpu/arm_cortexa8/omap3/sys_info.c | 2 +- include/asm-arm/arch-omap3/mem.h | 11 ++--------- 3 files changed, 4 insertions(+), 11 deletions(-)
cpu/arm_cortexa8/omap3/mem.c +1 -1
@@ -161,7 +161,7 @@ void do_sdrc_init(u32 cs, u32 early)writel (0 , &sdrc_base->sysconfig);/* setup sdrc to ball mux */ -writel (SDP_SDRC_SHARING , &sdrc_base->sharing); +writel (SDRC_SHARING , &sdrc_base->sharing);/* Disable Power Down of CKE cuz of 1 CKE on combo part */ writel(WAKEUPPROC | PWDNEN | SRFRONRESET | PAGEPOLICY_HIGH,
cpu/arm_cortexa8/omap3/sys_info.c +1 -1
@@ -109,7 +109,7 @@ u32 get_cpu_rev(void)****************************************************/ u32 is_mem_sdr (void ) { -if (readl (&sdrc_base->cs[CS0 ].mr) ==SDP_SDRC_MR_0_SDR ) +if (readl (&sdrc_base->cs[CS0 ].mr) ==SDRC_MR_0_SDR )return 1 ;return 0 ; }
include/asm-arm/arch-omap3/mem.h +2 -9
@@ -40,11 +40,8 @@ enum {#define EARLY_INIT 1/* Slower full frequency range default timings for x32 operation*/ -#define SDP_SDRC_SHARING 0x00000100 -#define SDP_SDRC_MR_0_SDR 0x00000031 - -/* optimized timings good for current shipping parts */ -#define SDP_3430_SDRC_RFR_CTRL_165MHz 0x0004e201/* 7.8us/6ns - 50=0x4e2 */ +#define SDRC_SHARING 0x00000100 +#define SDRC_MR_0_SDR 0x00000031#define DLL_OFFSET 0#define DLL_WRITEDDRCLKX2DIS 1
@@ -91,10 +88,6 @@ enum {#define V_ACTIMB_165 (((TCKE_165 << 12) | (XSR_165 << 0)) | \ (TXP_165 << 8) | (TWTR_165 << 16)) -#define SDP_SDRC_ACTIM_CTRLA_0 V_ACTIMA_165 -#define SDP_SDRC_ACTIM_CTRLB_0 V_ACTIMB_165 -#define SDP_SDRC_RFR_CTRL SDP_3430_SDRC_RFR_CTRL_165MHz -/* * GPMC settings - * Definitions is as per the following format
Signature · 1 line
1.6.3.3
PATCH 2/2 OMAP3:SDRC: introduce DDR types
Micron DDR timings based on:
http://www.sakoman.net/cgi-bin/gitweb.cgi?p=x-load-omap3.git;a=blob;f=include/asm/arch-omap3/mem.h;h=e6fbfe3947f5d0d85fea776e30821d4017316d86;hb=HEAD
Introduce Micron DDR timings and provide CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config options to allow for platform files to setup their timings as per the type of DDR selected
--- include/asm-arm/arch-omap3/mem.h | 88 ++++++++++++++++++++++++++++++-------- include/configs/devkit8000.h | 3 + include/configs/omap3_beagle.h | 3 + include/configs/omap3_evm.h | 3 + include/configs/omap3_overo.h | 3 + include/configs/omap3_pandora.h | 3 + include/configs/omap3_sdp3430.h | 3 + include/configs/omap3_zoom1.h | 3 + include/configs/omap3_zoom2.h | 3 + 9 files changed, 94 insertions(+), 18 deletions(-)
include/asm-arm/arch-omap3/mem.h +71 -19
@@ -68,26 +68,78 @@ enum {* TCKE = 2 * XSR = 120/6 = 20 */ -#define TDAL_165 6 -#define TDPL_165 3 -#define TRRD_165 2 -#define TRCD_165 3 -#define TRP_165 3 -#define TRAS_165 7 -#define TRC_165 10 -#define TRFC_165 12 -#define V_ACTIMA_165 ((TRFC_165 << 27) | (TRC_165 << 22) | \ - (TRAS_165 << 18) | (TRP_165 << 15) | \ - (TRCD_165 << 12) | (TRRD_165 << 9) | \ - (TDPL_165 << 6) | (TDAL_165)) - -#define TWTR_165 1 -#define TCKE_165 2 -#define TXP_165 2 -#define XSR_165 20 -#define V_ACTIMB_165 (((TCKE_165 << 12) | (XSR_165 << 0)) | \ - (TXP_165 << 8) | (TWTR_165 << 16)) +#define INFINEON_TDAL_165 6 +#define INFINEON_TDPL_165 3 +#define INFINEON_TRRD_165 2 +#define INFINEON_TRCD_165 3 +#define INFINEON_TRP_165 3 +#define INFINEON_TRAS_165 7 +#define INFINEON_TRC_165 10 +#define INFINEON_TRFC_165 12 +#define INFINEON_V_ACTIMA_165 ((INFINEON_TRFC_165 << 27) | \ + (INFINEON_TRC_165 << 22) | (INFINEON_TRAS_165 << 18) | \ + (INFINEON_TRP_165 << 15) | (INFINEON_TRCD_165 << 12) | \ + (INFINEON_TRRD_165 << 9) | (INFINEON_TDPL_165 << 6) | \ + (INFINEON_TDAL_165)) +#define INFINEON_TWTR_165 1 +#define INFINEON_TCKE_165 2 +#define INFINEON_TXP_165 2 +#define INFINEON_XSR_165 20 +#define INFINEON_V_ACTIMB_165 ((INFINEON_TCKE_165 << 12) | \ + (INFINEON_XSR_165 << 0) | (INFINEON_TXP_165 << 8) | \ + (INFINEON_TWTR_165 << 16)) + +/* Micron part of 3430 EVM (165MHz optimized) 6.06ns +* ACTIMA +* TDAL = Twr/Tck + Trp/tck= 15/6 + 18 /6 = 2.5 + 3 = 5.5 -> 6 +* TDPL (Twr) = 15/6 = 2.5 -> 3 +* TRRD = 12/6 = 2 +* TRCD = 18/6 = 3 +* TRP = 18/6 = 3 +* TRAS = 42/6 = 7 +* TRC = 60/6 = 10 +* TRFC = 125/6 = 21 +* ACTIMB +* TWTR = 1 +* TCKE = 1 +* TXSR = 138/6 = 23 +* TXP = 25/6 = 4.1 ~5 +*/ +#define MICRON_TDAL_165 6 +#define MICRON_TDPL_165 3 +#define MICRON_TRRD_165 2 +#define MICRON_TRCD_165 3 +#define MICRON_TRP_165 3 +#define MICRON_TRAS_165 7 +#define MICRON_TRC_165 10 +#define MICRON_TRFC_165 21 +#define MICRON_V_ACTIMA_165 ((MICRON_TRFC_165 << 27) | \ + (MICRON_TRC_165 << 22) | (MICRON_TRAS_165 << 18) | \ + (MICRON_TRP_165 << 15) | (MICRON_TRCD_165 << 12) | \ + (MICRON_TRRD_165 << 9) | (MICRON_TDPL_165 << 6) | \ + (MICRON_TDAL_165)) + +#define MICRON_TWTR_165 1 +#define MICRON_TCKE_165 1 +#define MICRON_XSR_165 23 +#define MICRON_TXP_165 5 +#define MICRON_V_ACTIMB_165 ((MICRON_TCKE_165 << 12) | \ + (MICRON_XSR_165 << 0) | (MICRON_TXP_165 << 8) | \ + (MICRON_TWTR_165 << 16)) + +#ifdef CONFIG_OMAP3_INFINEON_DDR +#define V_ACTIMA_165 INFINEON_V_ACTIMA_165 +#define V_ACTIMB_165 INFINEON_V_ACTIMB_165 +#endif +#ifdef CONFIG_OMAP3_MICRON_DDR +#define V_ACTIMA_165 MICRON_V_ACTIMA_165 +#define V_ACTIMB_165 MICRON_V_ACTIMB_165 +#endif + +#if !defined(V_ACTIMA_165 ) || !defined(V_ACTIMB_165 ) +#error "Please choose the right DDR type in config header" +#endif /* * GPMC settings - * Definitions is as per the following format
include/configs/devkit8000.h +3 -0
@@ -66,6 +66,9 @@/* Hardware drivers */ +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 +/* DM9000 */ #define CONFIG_NET_MULTI 1#define CONFIG_NET_RETRY_COUNT 20
include/configs/omap3_beagle.h +3 -0
@@ -97,6 +97,9 @@#define CONFIG_OMAP3_MMC 1#define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 +/* commands to include */ #include <config_cmd_default.h>
include/configs/omap3_evm.h +3 -0
@@ -101,6 +101,9 @@#define CONFIG_OMAP3_MMC 1#define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 +/* commands to include */ #include <config_cmd_default.h>
include/configs/omap3_overo.h +3 -0
@@ -89,6 +89,9 @@#define CONFIG_OMAP3_MMC 1#define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 +/* commands to include */ #include <config_cmd_default.h>
include/configs/omap3_pandora.h +3 -0
@@ -92,6 +92,9 @@#define CONFIG_OMAP3_MMC 1#define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 +/* commands to include */ #include <config_cmd_default.h>
include/configs/omap3_sdp3430.h +3 -0
@@ -137,6 +137,9 @@#define CONFIG_SYS_I2C_BUS_SELECT 1#define CONFIG_DRIVER_OMAP34XX_I2C 1 +/* DDR - I use Infineon DDR */ +#define CONFIG_OMAP3_INFINEON_DDR 1 +/* OMITTED: single 1 Gbit MT29F1G NAND flash */ /*
include/configs/omap3_zoom1.h +3 -0
@@ -98,6 +98,9 @@#define CONFIG_OMAP3_MMC 1#define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 +/* commands to include */ #include <config_cmd_default.h>
include/configs/omap3_zoom2.h +3 -0
@@ -98,6 +98,9 @@#define CONFIG_OMAP3_MMC 1#define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 +/* Status LED */ #define CONFIG_STATUS_LED 1/* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED 1
Signature · 1 line
1.6.3.3
Paulraj
PATCH 2/2 OMAP3:SDRC: introduce DDR types
Quoted 16 lines
Micron DDR timings based on:
http://www.sakoman.net/cgi-bin/gitweb.cgi?p=x-load-
omap3.git;a=blob;f=include/asm/arch- omap3/mem.h;h=e6fbfe3947f5d0d85fea776e30821d4017316d86;hb=HEADIntroduce Micron DDR timings and provide
CONFIG_OMAP3_INFINEON_DDRandCONFIG_OMAP3_MICRON_DDRconfig options to allow for platform files to setup their timings as per the type of DDR selectedReported-by: Steve Sakoman in
http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page
=ySigned-off-by Nishanth Menon <[email protected]>
Quoted 13 lines
--- include/asm-arm/arch-omap3/mem.h | 88 ++++++++++++++++++++++++++++++--- ----- include/configs/devkit8000.h | 3 + include/configs/omap3_beagle.h | 3 + include/configs/omap3_evm.h | 3 + include/configs/omap3_overo.h | 3 + include/configs/omap3_pandora.h | 3 + include/configs/omap3_sdp3430.h | 3 + include/configs/omap3_zoom1.h | 3 + include/configs/omap3_zoom2.h | 3 + 9 files changed, 94 insertions(+), 18 deletions(-)
Pushed to u-boot-ti/next
I think this series from Nishanth needs some runtime tests.
I believe Steve had some issues with his EVM not booting everytime due to issues with DDR init.
Thanks,
Sandeep
PATCH 2/2 OMAP3:SDRC: introduce DDR types
Quoted 29 lines · Sandeep
Quoted 15 lines
Micron DDR timings based on:
http://www.sakoman.net/cgi-bin/gitweb.cgi?p=x-load-
omap3.git;a=blob;f=include/asm/arch- omap3/mem.h;h=e6fbfe3947f5d0d85fea776e30821d4017316d86;hb=HEADIntroduce Micron DDR timings and provide
CONFIG_OMAP3_INFINEON_DDRandCONFIG_OMAP3_MICRON_DDRconfig options to allow for platform files to setup their timings as per the type of DDR selectedReported-by: Steve Sakoman in
http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page
=ySigned-off-by Nishanth Menon <[email protected]>Quoted 13 lines
--- include/asm-arm/arch-omap3/mem.h | 88 ++++++++++++++++++++++++++++++--- ----- include/configs/devkit8000.h | 3 + include/configs/omap3_beagle.h | 3 + include/configs/omap3_evm.h | 3 + include/configs/omap3_overo.h | 3 + include/configs/omap3_pandora.h | 3 + include/configs/omap3_sdp3430.h | 3 + include/configs/omap3_zoom1.h | 3 + include/configs/omap3_zoom2.h | 3 + 9 files changed, 94 insertions(+), 18 deletions(-)
Quoted 7 lines
Pushed to u-boot-ti/next
I think this series from Nishanth needs some runtime tests.
I believe Steve had some issues with his EVM not booting everytime due to issues with DDR init.Thanks,
Sandeep
Maybe it should go on the testing branch?
I will give zoom2 a try..
Tom
Paulraj
PATCH 2/2 OMAP3:SDRC: introduce DDR types
Quoted 34 lines
Quoted 9 lines
Quoted 9 lines
Introduce Micron DDR timings and provide
CONFIG_OMAP3_INFINEON_DDRandCONFIG_OMAP3_MICRON_DDRconfig options to allow for platform files to setup their timings as per the type of DDR selectedReported-by Steve Sakoman inhttp://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page
Quoted 5 lines
Quoted 5 lines
=y
Signed-off-by Nishanth Menon <[email protected]>--- include/asm-arm/arch-omap3/mem.h | 88++++++++++++++++++++++++++++++---
Quoted 12 lines
Quoted 11 lines
-----
include/configs/devkit8000.h | 3 + include/configs/omap3_beagle.h | 3 + include/configs/omap3_evm.h | 3 + include/configs/omap3_overo.h | 3 + include/configs/omap3_pandora.h | 3 + include/configs/omap3_sdp3430.h | 3 + include/configs/omap3_zoom1.h | 3 + include/configs/omap3_zoom2.h | 3 + 9 files changed, 94 insertions(+), 18 deletions(-)Quoted 4 lines
Pushed to u-boot-ti/next
I think this series from Nishanth needs some runtime tests. I believe Steve had some issues with his EVM not booting everytime due
to issues with DDR init.
Quoted 1 line
Quoted 9 lines
Quoted 2 lines
Thanks,
SandeepMaybe it should go on the testing branch?
I will give zoom2 a try..
Tom
Nishanth has already tried on SDP 3430.
I think the board that needs to be tried is overo.
Sandeep
PATCH 2/2 OMAP3:SDRC: introduce DDR types
Quoted 37 lines · Sandeep
Quoted 37 lines
Quoted 9 lines
Quoted 9 lines
Introduce Micron DDR timings and provide
CONFIG_OMAP3_INFINEON_DDRandCONFIG_OMAP3_MICRON_DDRconfig options to allow for platform files to setup their timings as per the type of DDR selectedReported-by Steve Sakoman inhttp://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page
Quoted 5 lines
Quoted 5 lines
=y
Signed-off-by Nishanth Menon <[email protected]>---
?include/asm-arm/arch-omap3/mem.h | ? 88++++++++++++++++++++++++++++++---
Quoted 12 lines
Quoted 11 lines
-----
?include/configs/devkit8000.h ? ? | ? ?3 + ?include/configs/omap3_beagle.h ? | ? ?3 + ?include/configs/omap3_evm.h ? ? ?| ? ?3 + ?include/configs/omap3_overo.h ? ?| ? ?3 + ?include/configs/omap3_pandora.h ?| ? ?3 + ?include/configs/omap3_sdp3430.h ?| ? ?3 + ?include/configs/omap3_zoom1.h ? ?| ? ?3 + ?include/configs/omap3_zoom2.h ? ?| ? ?3 +?9 files changed, 94 insertions(+), 18 deletions(-)
Quoted 4 lines
Pushed to u-boot-ti/next
I think this series from Nishanth needs some runtime tests. I believe Steve had some issues with his EVM not booting everytime due
to issues with DDR init.
Quoted 3 lines
Thanks,
Sandeep
Quoted 8 lines
Quoted 6 lines
Maybe it should go on the testing branch?
I will give zoom2 a try..
Tom
Nishanth has already tried on SDP 3430.
I think the board that needs to be tried is overo.
Correct, it was Overo, though I suspect Beagle might have the same issue since they use the same Micron POP memory. I'll try to test this weekend.
Steve
PATCH 2/2 OMAP3:SDRC: introduce DDR types
Quoted 39 lines · Steve Sakoman
Quoted 38 lines · Sandeep
Quoted 38 lines
Quoted 7 lines
Quoted 7 lines
Introduce Micron DDR timings and provide
CONFIG_OMAP3_INFINEON_DDRandCONFIG_OMAP3_MICRON_DDRconfig options to allow for platform files to setup their timings as per the type of DDR selectedReported-by Steve Sakoman inhttp://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page
Quoted 5 lines
Quoted 5 lines
=y
Signed-off-by Nishanth Menon <[email protected]>--- include/asm-arm/arch-omap3/mem.h | 88++++++++++++++++++++++++++++++---
Quoted 11 lines
Quoted 11 lines
-----
include/configs/devkit8000.h | 3 + include/configs/omap3_beagle.h | 3 + include/configs/omap3_evm.h | 3 + include/configs/omap3_overo.h | 3 + include/configs/omap3_pandora.h | 3 + include/configs/omap3_sdp3430.h | 3 + include/configs/omap3_zoom1.h | 3 + include/configs/omap3_zoom2.h | 3 + 9 files changed, 94 insertions(+), 18 deletions(-)Quoted 4 lines
Pushed to u-boot-ti/next
I think this series from Nishanth needs some runtime tests. I believe Steve had some issues with his EVM not booting everytime due
to issues with DDR init.
Quoted 2 lines
Thanks,
SandeepMaybe it should go on the testing branch?
I will give zoom2 a try..
Tom
Quoted 8 lines
Quoted 2 lines
Nishanth has already tried on SDP 3430.
I think the board that needs to be tried is overo.Correct, it was Overo, though I suspect Beagle might have the same issue since they use the same Micron POP memory. I'll try to test this weekend.
Steve
I can try that too.
Did you see the problem on warm or cold booting?
Tom
PATCH 2/2 OMAP3:SDRC: introduce DDR types
Quoted 57 lines · Tom
Quoted 56 lines · Steve Sakoman
Quoted 40 lines · Sandeep
Quoted 40 lines
Quoted 8 lines
Quoted 8 lines
Introduce Micron DDR timings and provide
CONFIG_OMAP3_INFINEON_DDRandCONFIG_OMAP3_MICRON_DDRconfig options to allow for platform files to setup their timings as per the type of DDR selectedReported-by Steve Sakoman inhttp://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page
Quoted 6 lines
Quoted 6 lines
=y
Signed-off-by Nishanth Menon <[email protected]>---
?include/asm-arm/arch-omap3/mem.h | ? 88++++++++++++++++++++++++++++++---
Quoted 12 lines
Quoted 10 lines
-----
?include/configs/devkit8000.h ? ? | ? ?3 + ?include/configs/omap3_beagle.h ? | ? ?3 + ?include/configs/omap3_evm.h ? ? ?| ? ?3 + ?include/configs/omap3_overo.h ? ?| ? ?3 + ?include/configs/omap3_pandora.h ?| ? ?3 + ?include/configs/omap3_sdp3430.h ?| ? ?3 + ?include/configs/omap3_zoom1.h ? ?| ? ?3 + ?include/configs/omap3_zoom2.h ? ?| ? ?3 +Quoted 2 lines
?9 files changed, 94 insertions(+), 18 deletions(-)
Quoted 4 lines
Pushed to u-boot-ti/next
I think this series from Nishanth needs some runtime tests. I believe Steve had some issues with his EVM not booting everytime due
to issues with DDR init.
Quoted 3 lines
Thanks,
SandeepQuoted 8 lines
Quoted 6 lines
Maybe it should go on the testing branch?
I will give zoom2 a try..
Tom
Nishanth has already tried on SDP 3430.
I think the board that needs to be tried is overo.Correct, it was Overo, though I suspect Beagle might have the same issue since they use the same Micron POP memory. ?I'll try to test this weekend.
Quoted 5 lines
Quoted 1 line
Steve
I can try that too.
Did you see the problem on warm or cold booting?
IIRC, it was an issue with both warm and cold boots.
Steve
Paulraj
PATCH 2/2 OMAP3:SDRC: introduce DDR types
In reply to TomQuoted 33 lines
Quoted 8 lines
Quoted 8 lines
Introduce Micron DDR timings and provide
CONFIG_OMAP3_INFINEON_DDRandCONFIG_OMAP3_MICRON_DDRconfig options to allow for platform files to setup their timings as per the type of DDR selectedReported-by Steve Sakoman inhttp://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page
Quoted 5 lines
Quoted 5 lines
=y
Signed-off-by Nishanth Menon <[email protected]>--- include/asm-arm/arch-omap3/mem.h | 88++++++++++++++++++++++++++++++---
Quoted 12 lines
Quoted 11 lines
-----
include/configs/devkit8000.h | 3 + include/configs/omap3_beagle.h | 3 + include/configs/omap3_evm.h | 3 + include/configs/omap3_overo.h | 3 + include/configs/omap3_pandora.h | 3 + include/configs/omap3_sdp3430.h | 3 + include/configs/omap3_zoom1.h | 3 + include/configs/omap3_zoom2.h | 3 + 9 files changed, 94 insertions(+), 18 deletions(-)Quoted 4 lines
Pushed to u-boot-ti/next
I think this series from Nishanth needs some runtime tests. I believe Steve had some issues with his EVM not booting everytime due
to issues with DDR init.
Quoted 1 line
Quoted 9 lines
Quoted 2 lines
Thanks,
SandeepMaybe it should go on the testing branch?
I will give zoom2 a try..
Tom
Tom, Dirk, Steve,
Did u get a chance to try?
I am seeing a lot of OMAP3 patches which seem to be touching the above mentioned headers files.
Thanks,
Sandeep
PATCH 2/2 OMAP3:SDRC: introduce DDR types
Quoted 39 lines · Sandeep
Quoted 29 lines
Quoted 7 lines
Quoted 7 lines
Introduce Micron DDR timings and provide
CONFIG_OMAP3_INFINEON_DDRandCONFIG_OMAP3_MICRON_DDRconfig options to allow for platform files to setup their timings as per the type of DDR selectedReported-by Steve Sakoman inhttp://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page
Quoted 5 lines
Quoted 5 lines
=y
Signed-off-by Nishanth Menon <[email protected]>--- include/asm-arm/arch-omap3/mem.h | 88++++++++++++++++++++++++++++++---
Quoted 11 lines
Quoted 11 lines
-----
include/configs/devkit8000.h | 3 + include/configs/omap3_beagle.h | 3 + include/configs/omap3_evm.h | 3 + include/configs/omap3_overo.h | 3 + include/configs/omap3_pandora.h | 3 + include/configs/omap3_sdp3430.h | 3 + include/configs/omap3_zoom1.h | 3 + include/configs/omap3_zoom2.h | 3 + 9 files changed, 94 insertions(+), 18 deletions(-)Quoted 4 lines
Pushed to u-boot-ti/next
I think this series from Nishanth needs some runtime tests. I believe Steve had some issues with his EVM not booting everytime due
Quoted 9 lines
to issues with DDR init.
Quoted 2 lines
Thanks,
SandeepMaybe it should go on the testing branch?
I will give zoom2 a try..
Tom
Quoted 11 lines
Tom, Dirk, Steve,
Did u get a chance to try?
I am seeing a lot of OMAP3 patches which seem to be touching the above mentioned headers files.
Thanks,
Sandeep
For zoom2.
I warm booted the kernel with ti/next.
So it looks ok for zoom2
Tom
Menon
PATCH 2/2 OMAP3:SDRC: introduce DDR types
Quoted 46 lines
From: Tom [mailto:Tom.Rix at windriver.com]
Sent: Thursday, November 12, 2009 11:30 AMQuoted 8 lines · Sandeep
Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
Introduce Micron DDR timings and provide
CONFIG_OMAP3_INFINEON_DDRandCONFIG_OMAP3_MICRON_DDRconfig options to allow for platform files to setup their timings as per the type of DDR selectedReported-by Steve Sakoman inhttp://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page
Quoted 33 lines
Quoted 21 lines
Quoted 5 lines
Quoted 5 lines
=y
Signed-off-by Nishanth Menon <[email protected]>--- include/asm-arm/arch-omap3/mem.h | 88++++++++++++++++++++++++++++++---
Quoted 11 lines
Quoted 11 lines
-----
include/configs/devkit8000.h | 3 + include/configs/omap3_beagle.h | 3 + include/configs/omap3_evm.h | 3 + include/configs/omap3_overo.h | 3 + include/configs/omap3_pandora.h | 3 + include/configs/omap3_sdp3430.h | 3 + include/configs/omap3_zoom1.h | 3 + include/configs/omap3_zoom2.h | 3 + 9 files changed, 94 insertions(+), 18 deletions(-)Quoted 4 lines
Pushed to u-boot-ti/next
I think this series from Nishanth needs some runtime tests. I believe Steve had some issues with his EVM not booting everytime due
Quoted 9 lines
to issues with DDR init.
Quoted 2 lines
Thanks,
SandeepMaybe it should go on the testing branch?
I will give zoom2 a try..
Tom
Tom, Dirk, Steve,
Quoted 8 lines
Quoted 3 lines
Did u get a chance to try?
I am seeing a lot of OMAP3 patches which seem to be touching the above
mentioned headers files.
Quoted 1 line
For zoom2.
I warm booted the kernel with ti/next.
So it looks ok for zoom2
u-boot-ti Ok for SDP3430.
Regards,
Nishanth Menon
Paulraj
PATCH 1/2 OMAP3:SDRC: Cleanup references to SDP
In reply to Nishanth MenonQuoted 10 lines
Remove SDP referenced unused defines
Signed-off-by Nishanth Menon <[email protected]>--- cpu/arm_cortexa8/omap3/mem.c | 2 +- cpu/arm_cortexa8/omap3/sys_info.c | 2 +- include/asm-arm/arch-omap3/mem.h | 11 ++--------- 3 files changed, 4 insertions(+), 11 deletions(-)
Pushed to u-boot-ti/next
Thanks,
Sandeep