Skip to contentSkip to conversation

ARM: OMAP3: Add support for the IGEP v2 board (rev B)

PATCH Frédéric BEGOU 2 participants 2 messages Nov 14, 2009

lore
Share & tools
lore
#0 lore raw

Hello,

For what I've seen on the Internet concerning your card, there is only one MMC card reader. Besides, there is the following piece of code :

Quoted 5 lines
(quoted diff) +5 -0
+static struct twl4030_hsmmc_info mmc[] = {
+       {
+               .mmc            = 1,
+               .wires          = 4,
+               .gpio_cd        = -EINVAL,

Review

Quoted 10 lines
(quoted diff) +10 -0
+               .gpio_wp        = -EINVAL,
+       },
+       {
+               .mmc            = 2,
+               .wires          = 4,
+               .gpio_cd        = -EINVAL,
+               .gpio_wp        = -EINVAL,
+       },
+       {}      /* Terminator */
+};

Maybe I am mistaken, but doesn't that mean there are two MMC cards ?

I am interested in the subject, as I am trying to write my own board file for our custom, beagleboard-based card, with no success so far concerning the second MMC reader...

Best regards,

Fred

#1 lore raw
Quoted 23 lines · Frédéric BEGOU

Hello,

For what I've seen on the Internet concerning your card, there is only one MMC card reader. Besides, there is the following piece of code :

Quoted 5 lines
(quoted diff) +5 -0
+static struct twl4030_hsmmc_info mmc[] = {
+       {
+               .mmc            = 1,
+               .wires          = 4,
+               .gpio_cd        = -EINVAL,

Review

Quoted 10 lines
(quoted diff) +10 -0
+               .gpio_wp        = -EINVAL,
+       },
+       {
+               .mmc            = 2,
+               .wires          = 4,
+               .gpio_cd        = -EINVAL,
+               .gpio_wp        = -EINVAL,
+       },
+       {}      /* Terminator */
+};

Maybe I am mistaken, but doesn't that mean there are two MMC cards ?

Quoted 1 line

I am interested in the subject, as I am trying to write my own board file for our custom, beagleboard-based card, with no success so far concerning the second MMC reader...

Well, it seems that the board is question has a WIFI module connected to the second mmc. What is your problem right now ? Remember that all three MMC slots are different in what kind of voltage they can drive.

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html