v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: OK
This message is generated daily by a cron job that builds v4l-dvb for the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date: Sun Jan 3 19:00:03 CET 2010 path: http://www.linuxtv.org/hg/v4l-dvb changeset: 13879:b6b82258cf5e gcc version: gcc (GCC) 4.3.1 hardware: x86_64 host os: 2.6.26
linux-2.6.30-armv5: OK
linux-2.6.31-armv5: OK
linux-2.6.32-armv5: OK
linux-2.6.33-rc2-armv5: ERRORS
linux-2.6.32-armv5-davinci: OK
linux-2.6.33-rc2-armv5-davinci: ERRORS
linux-2.6.30-armv5-ixp: OK
linux-2.6.31-armv5-ixp: OK
linux-2.6.32-armv5-ixp: OK
linux-2.6.33-rc2-armv5-ixp: ERRORS
linux-2.6.30-armv5-omap2: OK
linux-2.6.31-armv5-omap2: OK
linux-2.6.32-armv5-omap2: OK
linux-2.6.33-rc2-armv5-omap2: ERRORS
linux-2.6.22.19-i686: OK
linux-2.6.23.12-i686: OK
linux-2.6.24.7-i686: OK
linux-2.6.25.11-i686: OK
linux-2.6.26-i686: OK
linux-2.6.27-i686: OK
linux-2.6.28-i686: OK
linux-2.6.29.1-i686: WARNINGS
linux-2.6.30-i686: OK
linux-2.6.31-i686: WARNINGS
linux-2.6.32-i686: WARNINGS
linux-2.6.33-rc2-i686: ERRORS
linux-2.6.30-m32r: OK
linux-2.6.31-m32r: OK
linux-2.6.32-m32r: OK
linux-2.6.33-rc2-m32r: ERRORS
linux-2.6.30-mips: WARNINGS
linux-2.6.31-mips: OK
linux-2.6.32-mips: OK
linux-2.6.33-rc2-mips: ERRORS
linux-2.6.30-powerpc64: WARNINGS
linux-2.6.31-powerpc64: OK
linux-2.6.32-powerpc64: WARNINGS
linux-2.6.33-rc2-powerpc64: ERRORS
linux-2.6.22.19-x86_64: OK
linux-2.6.23.12-x86_64: OK
linux-2.6.24.7-x86_64: OK
linux-2.6.25.11-x86_64: OK
linux-2.6.26-x86_64: OK
linux-2.6.27-x86_64: OK
linux-2.6.28-x86_64: OK
linux-2.6.29.1-x86_64: WARNINGS
linux-2.6.30-x86_64: OK
linux-2.6.31-x86_64: WARNINGS
linux-2.6.32-x86_64: WARNINGS
linux-2.6.33-rc2-x86_64: ERRORS
spec: OK
sparse (linux-2.6.32): ERRORS
sparse (linux-2.6.33-rc2): ERRORS
linux-2.6.16.61-i686: OK
linux-2.6.17.14-i686: OK
linux-2.6.18.8-i686: OK
linux-2.6.19.5-i686: OK
linux-2.6.20.21-i686: OK
linux-2.6.21.7-i686: OK
linux-2.6.16.61-x86_64: OK
linux-2.6.17.14-x86_64: OK
linux-2.6.18.8-x86_64: OK
linux-2.6.19.5-x86_64: OK
linux-2.6.20.21-x86_64: OK
linux-2.6.21.7-x86_64: OK
Detailed results are available here:
http://www.xs4all.nl/~hverkuil/logs/Sunday.log
Full logs are available here:
http://www.xs4all.nl/~hverkuil/logs/Sunday.tar.bz2
The V4L-DVB specification from this daily build is here:
PATCH 1/1 rj54n1cb0c: remove compiler warning
From: Márton Németh <[email protected]>
Remove the following compiler warning: 'dummy' is used uninitialized in this function. Although the result in the dummy variable is not used the program flow in soc_camera_limit_side() depends on the value in dummy. The program flow is better to be deterministic.
---
linux/drivers/media/video/rj54n1cb0c.c +1 -1
@@ -563,7 +563,7 @@struct i2c_client *client = sd->priv;struct rj54n1 *rj54n1 =to_rj54n1 (client);struct v4l2_rect *rect = &a->c; -unsigned int dummy, output_w, output_h, +unsigned int dummy =0 , output_w, output_h, input_w = rect->width, input_h = rect->height;int ret;
Re: [PATCH] rj54n1cb0c: remove compiler warning
Hi Márton
Quoted 8 lines · Németh Márton
From: Márton Németh <[email protected]>
Remove the following compiler warning: 'dummy' is used uninitialized in this function. Although the result in the dummy variable is not used the program flow in
soc_camera_limit_side()depends on the value in dummy. The program flow is better to be deterministic.Signed-off-by Márton Németh <[email protected]>
The patch is good, the only slight problem - you have non-ASCII characters in your name and you didn't use UTF-8 to send this mail, which, I think, is the accepted encoding in the Linux kernel. I converted your patch to utf8 and attached to this mail. Please verify that the result is correct.
linux/drivers/media/video/rj54n1cb0c.c line 569
Quoted 13 lines
---
diff -r62ee2b0f6556linux/drivers/media/video/rj54n1cb0c.clinux/drivers/media/video/rj54n1cb0c.c +1
-1@@ -563,7 +563,7 @@struct i2c_client *client = sd->priv;struct rj54n1 *rj54n1 =to_rj54n1 (client);struct v4l2_rect *rect = &a->c; -unsigned int dummy, output_w, output_h, +unsigned int dummy =0 , output_w, output_h, input_w = rect->width, input_h = rect->height;int ret;
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
From [email protected] Sun Jan 3 21:38:51 2010
Date: Sun, 03 Jan 2010 21:34:59 +0100
From: Németh Márton <[email protected]>
To: Guennadi Liakhovetski <[email protected]>
Cc: Hans Verkuil <[email protected]>, V4L Mailing List <[email protected]>
Subject: [PATCH] rj54n1cb0c: remove compiler warning
From: Márton Németh <[email protected]>
Remove the following compiler warning: 'dummy' is used uninitialized in this function. Although the result in the dummy variable is not used the program flow in soc_camera_limit_side() depends on the value in dummy. The program flow is better to be deterministic.
---
linux/drivers/media/video/rj54n1cb0c.c +1 -1
@@ -563,7 +563,7 @@struct i2c_client *client = sd->priv;struct rj54n1 *rj54n1 =to_rj54n1 (client);struct v4l2_rect *rect = &a->c; -unsigned int dummy, output_w, output_h, +unsigned int dummy =0 , output_w, output_h, input_w = rect->width, input_h = rect->height;int ret;
Re: [PATCH] rj54n1cb0c: remove compiler warning
Quoted 11 lines · Guennadi Liakhovetski
Hi Márton
Quoted 7 lines · Németh Márton
From: Márton Németh <[email protected]>
Remove the following compiler warning: 'dummy' is used uninitialized in this function. Although the result in the dummy variable is not used the program flow in
soc_camera_limit_side()depends on the value in dummy. The program flow is better to be deterministic.
Quoted 6 lines
Quoted 1 line
Signed-off-by Márton Németh <[email protected]>The patch is good, the only slight problem - you have non-ASCII characters in your name and you didn't use UTF-8 to send this mail, which, I think, is the accepted encoding in the Linux kernel. I converted your patch to utf8 and attached to this mail. Please verify that the result is correct.
Your conversion is OK. Sorry about this issue.
Regards,
Márton Németh