Skip to contentSkip to conversation

ep93xx: use pr_fmt in dma-m2p.c

PATCH New H Hartley Sweeten 2 participants 2 messages Dec 30, 2009 – Jan 11, 2010

Subsystems (3)
Arm (32-bit) Arm sub-architectures Arm/Cirrus logic EP93XX Arm architecture
lore
Share & tools
lore

H Hartley Sweeten

author
#0 lore raw

PATCH 1/1 ep93xx: use pr_fmt in dma-m2p.c

Use pr_fmt to prefix kernel output with the module name.

Signed-off-by H Hartley Sweeten <[email protected]>
Cc Ryan Mallon <[email protected]>

---

arch/arm/mach-ep93xx/dma-m2p.c +4 -2
index dbcac9c..8904ca4 100644
@@ -28,6 +28,8 @@
  * with this implementation.
  */
 
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>

@@ -173,7 +175,7 @@ static irqreturn_t m2p_irq(int irq, void *dev_id)
 
 	switch (m2p_channel_state(ch)) {
 	case STATE_IDLE:
-		pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
+		pr_crit("dma interrupt without a dma buffer\n");
 		BUG();
 		break;
 

@@ -197,7 +199,7 @@ static irqreturn_t m2p_irq(int irq, void *dev_id)
 		break;
 
 	case STATE_NEXT:
-		pr_crit("m2p_irq: dma interrupt while next\n");
+		pr_crit("dma interrupt while next\n");
 		BUG();
 		break;
 	}
#1 lore raw

PATCH 1/1 ep93xx: use pr_fmt in dma-m2p.c

Quoted 30 lines · H Hartley Sweeten

Use pr_fmt to prefix kernel output with the module name.

Signed-off-by H Hartley Sweeten <[email protected]>
Cc Ryan Mallon <[email protected]>

---

arch/arm/mach-ep93xx/dma-m2p.c +3 -1
index dbcac9c..8904ca4 100644
@@ -28,6 +28,8 @@
  * with this implementation.
  */
 
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>

@@ -173,7 +175,7 @@ static irqreturn_t m2p_irq(int irq, void *dev_id)
 
 	switch (m2p_channel_state(ch)) {
 	case STATE_IDLE:
-		pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
+		pr_crit("dma interrupt without a dma buffer\n");
 		BUG();
 		break;

arch/arm/mach-ep93xx/dma-m2p.c static irqreturn_t m2p_irq(int irq, void *dev_id) · line 205

Quoted 8 lines
arch/arm/mach-ep93xx/dma-m2p.c +1 -1
@@ -197,7 +199,7 @@ static irqreturn_t m2p_irq(int irq, void *dev_id)
 		break;
 
 	case STATE_NEXT:
-		pr_crit("m2p_irq: dma interrupt while next\n");
+		pr_crit("dma interrupt while next\n");
 		BUG();
 		break;
 	}
Acked-by Ryan Mallon <[email protected]>
Signature · 7 lines
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon         		5 Amuri Park, 404 Barbadoes St
ryan at bluewatersys.com         	PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com	New Zealand
Phone: +64 3 3779127		Freecall: Australia 1800 148 751
Fax:   +64 3 3779135			  USA 1800 261 2934