Skip to contentSkip to conversation

volume developing problems even though should be static...

linux-lvm Linda A. Walsh 4 participants 4 messages Apr 21, 2010 – Apr 22, 2010

lore
Share & tools
lore
#0 lore raw

I needed extra space on my home partition, and speed, so I disabled my
snapshoting cron job and deleted any logical jobs for now.

But during this transition time, I've started getting some were symptoms. Now when I do a "pvs", I see:

# pvs
  /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error
  PV         VG   Fmt  Attr PSize   PFree  
  /dev/sdb1  Home lvm2 a-   888.48G      0 
  /dev/sdb2  Home lvm2 a-   888.48G 640.96G
  /dev/sdb3  Home lvm2 a-   584.87G 584.87G
# vgs
  /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error
  VG   #PV #LV #SN Attr   VSize VFree
  Home   3   7   6 wz--n- 2.31T 1.20T
# lvs
  /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error                      
  lvol0               Home -wi-ao  1.00T                                      

-----------------------------------------------
So, the "output of the commands looks mostly 'right', as near as I can tell: 3 physical volumes, -> 1 volume group with the 3 volumes, and
1 logical volume taking up space in that pv (only using part of the space).

What I don't get and what worries me a fair amount are the I/O errors -- any idea what's going on and how I shoudl fix this?

Thanks much!
linda

#1 lore raw
Quoted 2 lines

so I disabled my snapshoting cron job and deleted any logical jobs for now

dm-1 may be a volume (snapshot?) you deleted. Check with:
cat /sys/block/dm-1/dm/name

Why it's trying to read something that has been deleted
I don't know, but I know I get the same problem. --
Ray Morris
[email protected]

Strongbox - The next generation in site security:
http://www.bettercgi.com/strongbox/

Throttlebox - Intelligent Bandwidth Control
http://www.bettercgi.com/throttlebox/

Strongbox / Throttlebox affiliate program:
http://www.bettercgi.com/affiliates/user/register.php

Quoted 39 lines · Linda A. Walsh

I needed extra space on my home partition, and speed, so I disabled my
snapshoting cron job and deleted any logical jobs for now.

But during this transition time, I've started getting some were symptoms. Now when I do a "pvs", I see:

# pvs
  /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error
  PV         VG   Fmt  Attr PSize   PFree
  /dev/sdb1  Home lvm2 a-   888.48G      0
  /dev/sdb2  Home lvm2 a-   888.48G 640.96G
  /dev/sdb3  Home lvm2 a-   584.87G 584.87G
# vgs
  /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error
  VG   #PV #LV #SN Attr   VSize VFree
  Home   3   7   6 wz--n- 2.31T 1.20T
# lvs
  /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error
  lvol0               Home -wi-ao  1.00T

-----------------------------------------------
So, the "output of the commands looks mostly 'right', as near as I can tell: 3 physical volumes, -> 1 volume group with the 3 volumes, and
1 logical volume taking up space in that pv (only using part of the space).

What I don't get and what worries me a fair amount are the I/O errors --
any idea what's going on and how I shoudl fix this?

Thanks much!
linda

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

#2 lore raw
In reply to Linda A. Walsh
Quoted 2 lines · Linda A. Walsh

What I don't get and what worries me a fair amount are the I/O errors -- any idea what's going on and how I shoudl fix this?

Looks dm-1 is a snapshot that is full. Did you edit lvs output? Perhaps the snapshot was removed, but something still has it open.

Signature · 4 lines
	      Stuart D. Gathman <[email protected]>
    Business Management Systems Inc.  Phone: 703 591-0911 Fax: 703 591-6154
"Confutatis maledictis, flammis acribus addictis" - background song for
a Microsoft sponsored "Where do you want to go from here?" commercial.
#3 lore raw
In reply to Linda A. Walsh
Quoted 8 lines · Linda A. Walsh

I needed extra space on my home partition, and speed, so I disabled my snapshoting cron job and deleted any logical jobs for now.

But during this transition time, I've started getting some were symptoms. Now when I do a "pvs", I see:

# pvs
 /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error

please provide "dmsetup ls" and "dmsetup status" so we might know what /dev/dm-1 is.

L.

Signature · 6 lines
Luca Berra -- [email protected]
        Communication Media & Services S.r.l.
 /"\
 \ /     ASCII RIBBON CAMPAIGN
  X        AGAINST HTML MAIL
 / \