volume developing problems even though should be static...
I needed extra space on my home partition, and speed, so I disabled my
snapshoting cron job and deleted any logical jobs for now.
But during this transition time, I've started getting some were symptoms. Now when I do a "pvs", I see:
# pvs /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error PV VG Fmt Attr PSize PFree /dev/sdb1 Home lvm2 a- 888.48G 0 /dev/sdb2 Home lvm2 a- 888.48G 640.96G /dev/sdb3 Home lvm2 a- 584.87G 584.87G # vgs /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error VG #PV #LV #SN Attr VSize VFree Home 3 7 6 wz--n- 2.31T 1.20T # lvs /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error lvol0 Home -wi-ao 1.00T
-----------------------------------------------
So, the "output of the commands looks mostly 'right', as near as I can tell: 3 physical volumes, -> 1 volume group with the 3 volumes, and
1 logical volume taking up space in that pv (only using part of the space).
What I don't get and what worries me a fair amount are the I/O errors -- any idea what's going on and how I shoudl fix this?
Thanks much!
linda
Quoted 2 lines
so I disabled my snapshoting cron job and deleted any logical jobs for now
dm-1 may be a volume (snapshot?) you deleted. Check with:
cat /sys/block/dm-1/dm/name
Why it's trying to read something that has been deleted
I don't know, but I know I get the same problem. --
Ray Morris
[email protected]
Strongbox - The next generation in site security:
http://www.bettercgi.com/strongbox/
Throttlebox - Intelligent Bandwidth Control
http://www.bettercgi.com/throttlebox/
Strongbox / Throttlebox affiliate program:
http://www.bettercgi.com/affiliates/user/register.php
Quoted 39 lines · Linda A. Walsh
I needed extra space on my home partition, and speed, so I disabled my
snapshoting cron job and deleted any logical jobs for now.But during this transition time, I've started getting some were symptoms. Now when I do a "pvs", I see:
# pvs /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error PV VG Fmt Attr PSize PFree /dev/sdb1 Home lvm2 a- 888.48G 0 /dev/sdb2 Home lvm2 a- 888.48G 640.96G /dev/sdb3 Home lvm2 a- 584.87G 584.87G # vgs /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error VG #PV #LV #SN Attr VSize VFree Home 3 7 6 wz--n- 2.31T 1.20T # lvs /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error lvol0 Home -wi-ao 1.00T-----------------------------------------------
So, the "output of the commands looks mostly 'right', as near as I can tell: 3 physical volumes, -> 1 volume group with the 3 volumes, and
1 logical volume taking up space in that pv (only using part of the space).What I don't get and what worries me a fair amount are the I/O errors --
any idea what's going on and how I shoudl fix this?Thanks much!
linda_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 2 lines · Linda A. Walsh
What I don't get and what worries me a fair amount are the I/O errors -- any idea what's going on and how I shoudl fix this?
Looks dm-1 is a snapshot that is full. Did you edit lvs output? Perhaps the snapshot was removed, but something still has it open.
Signature · 4 lines
Stuart D. Gathman <[email protected]> Business Management Systems Inc. Phone: 703 591-0911 Fax: 703 591-6154 "Confutatis maledictis, flammis acribus addictis" - background song for a Microsoft sponsored "Where do you want to go from here?" commercial.
Quoted 8 lines · Linda A. Walsh
I needed extra space on my home partition, and speed, so I disabled my snapshoting cron job and deleted any logical jobs for now.
But during this transition time, I've started getting some were symptoms. Now when I do a "pvs", I see:
# pvs /dev/dm-1: read failed after 0 of 4096 at 0: Input/output error
please provide "dmsetup ls" and "dmsetup status" so we might know what /dev/dm-1 is.
L.
Signature · 6 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \