PROBLEM: e100 driver not working when bridge and vlan configured.
I have seen this bug in many threads also checked "http://www.mailinglistarchive.com/[email protected]/msg19768.html", but nothing works for me.
I am having 4 nics, driver for 2 nics is e1000 and 2 nics is e100.
Setup
( 192.168.1.1)br0-----------eth0
|-------------eth1
traffic flows through my bridge machine and i can ping 192.168.1.1, vlan traffic also pass through it.
I am not able to ping 192.168.1.1 using vlan interface
so i created and added vlan interfaces to bridge
( 192.168.1.1)br0-----------eth0
|-------------eth1
|-------------eth0.3
|-------------eth1.3Still i am not able to ping 192.168.1.1.
I then removed eth0, and eth1 from br0
( 192.168.1.1)br0-----------eth0.3
|-------------eth1.3
Now I am able to ping 192.168.1.1
My kernel is linux-2.6.27.45 and e100 driver is "3.5.23-k4-NAPI" which comes with kernel.
Same scenario works fine with e1000 driver.
This bug is already reported and i am not able to find any patch for it.
Regards,
Krunal