Skip to contentSkip to conversation

PROBLEM: e100 driver not working when bridge and vlan configured.

DISCUSSION krunal 1 participant 1 message May 17, 2010

lore
Share & tools
lore

krunal

author
#0 lore raw

I have seen this bug in many threads also checked "http://www.mailinglistarchive.com/[email protected]/msg19768.html", but nothing works for me.

I am having 4 nics, driver for 2 nics is e1000 and 2 nics is e100.

Setup
( 192.168.1.1)br0-----------eth0

                        |-------------eth1

traffic flows through my bridge machine and i can ping 192.168.1.1, vlan traffic also pass through it.

I am not able to ping 192.168.1.1 using vlan interface

so i created and added vlan interfaces to bridge
( 192.168.1.1)br0-----------eth0

                        |-------------eth1
                        |-------------eth0.3
                        |-------------eth1.3

Still i am not able to ping 192.168.1.1.

I then removed eth0, and eth1 from br0
( 192.168.1.1)br0-----------eth0.3

                        |-------------eth1.3

Now I am able to ping 192.168.1.1

My kernel is linux-2.6.27.45 and e100 driver is "3.5.23-k4-NAPI" which comes with kernel.

Same scenario works fine with e1000 driver.

This bug is already reported and i am not able to find any patch for it.

Regards,
Krunal