64 bit PCI BAR
Hi,
The following section, from PCI spec, explain the mechanism for getting 64 bit region size.
"64-bit (memory) Base Address registers can be handled the same, except that the second 32-bit register is considered an extension of the first; i.e., bits 32-63. Software writes 0FFFFFFFFh to both registers, reads them back, and combines the result into a 64-bit value. Size calculation is done on the 64-bit value."
In pci/proce.c the implementation is:
read low bar
write ~0 to low bar
read low bar
write low bar
read high bar
write ~0 to high bar
read high bar
write high bar
Can someone explain the conflict between the spec and the implementation?
Please add me to CC.
Thanks,
Ron