Skip to contentSkip to conversation

64 bit PCI BAR

DISCUSSION Ron Rondis 1 participant 1 message Nov 4, 2010

lore
Share & tools
lore

Ron Rondis

author
#0 lore raw

Hi,

The following section, from PCI spec, explain the mechanism for getting 64 bit region size.

"64-bit (memory) Base Address registers can be handled the same, except that the second 32-bit register is considered an extension of the first; i.e., bits 32-63. Software writes 0FFFFFFFFh to both registers, reads them back, and combines the result into a 64-bit value. Size calculation is done on the 64-bit value."

In pci/proce.c the implementation is:

read low bar
write ~0 to low bar
read low bar
write low bar

read high bar
write ~0 to high bar
read high bar
write high bar

Can someone explain the conflict between the spec and the implementation?

Please add me to CC.

Thanks,
Ron