Skip to contentSkip to conversation

OMAP3: add CM-T35 board

PATCH New Mike Rapoport 3 participants 4 messages Nov 23, 2010 – Nov 28, 2010

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 OMAP3: add CM-T35 board

This patch adds support for CM-T35 board

---
 MAINTAINERS              |    4 +
 MAKEALL                  |    1 +
 board/cm_t35/Makefile    |   47 ++++++
 board/cm_t35/cm_t35.c    |  222 ++++++++++++++++++++++++++++
 board/cm_t35/cm_t35.h    |  184 +++++++++++++++++++++++
 board/cm_t35/config.mk   |   30 ++++
 boards.cfg               |    1 +
 doc/README.omap3         |   16 ++-
 include/configs/cm_t35.h |  364 ++++++++++++++++++++++++++++++++++++++++++++++
 9 files changed, 867 insertions(+), 2 deletions(-)
 create mode 100644 board/cm_t35/Makefile
 create mode 100644 board/cm_t35/cm_t35.c
 create mode 100644 board/cm_t35/cm_t35.h
 create mode 100644 board/cm_t35/config.mk
 create mode 100644 include/configs/cm_t35.h
MAINTAINERS +4 -0
index 9258cb1..b44b843 100644
@@ -750,6 +750,10 @@ Stelian Pop <[email protected]>
 	at91sam9263ek	ARM926EJS (AT91SAM9263 SoC)
 	at91sam9rlek	ARM926EJS (AT91SAM9RL SoC)
 
+Mike Rapoport <[email protected]>
+
+	cm_t35		ARM ARMV7 (OMAP3xx SoC)
+
 Tom Rix <[email protected]>
 
 	omap3_zoom2	ARM ARMV7 (OMAP3xx SoC)
MAKEALL +1 -0
index c54c6e8..e0fe12f 100755
@@ -412,6 +412,7 @@ LIST_ARM11="			\
 LIST_ARMV7="		\
 	am3517_evm		\
 	ca9x4_ct_vxp		\
+	cm_t35			\
 	devkit8000		\
 	igep0020		\
 	igep0030		\
board/cm_t35/Makefile new file +47 -0

47 lines not on this page · raw message

board/cm_t35/cm_t35.c new file +222 -0

222 lines not on this page · raw message

board/cm_t35/cm_t35.h new file +184 -0

184 lines not on this page · raw message

board/cm_t35/config.mk new file +30 -0
new file mode 100644
index 0000000..e81e283
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2009
+# CompuLab, Ltd., <www.compulab.co.il>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+CONFIG_SYS_TEXT_BASE = 0x80008000
boards.cfg +1 -0
index 6c2a667..e79b2d7 100644
@@ -392,6 +392,7 @@ igep0020	arm	armv7		igep0020	isee		omap3
 igep0030	arm	armv7		igep0030	isee		omap3
 am3517_evm	arm	armv7		am3517evm	logicpd		omap3
 devkit8000	arm	armv7		devkit8000	timll		omap3
+cm_t35		arm	armv7		cm_t35		-		omap3
 omap4_panda	arm	armv7		panda		ti		omap4
 omap4_sdp4430	arm	armv7		sdp4430		ti		omap4
 s5p_goni	arm	armv7		goni		samsung		s5pc1xx
doc/README.omap3 +14 -2
index 6227151..460950d 100644
@@ -21,6 +21,8 @@ Currently the following boards are supported:
 
 * TI/Logic PD Zoom 2 [7]
 
+* CompuLab Ltd. CM-T35 [8]
+
 Toolchain
 =========
 
@@ -61,6 +63,11 @@ make
 make omap3_zoom2_config
 make
 
+* CM-T35:
+
+make cm_t35_config
+make
+
 Custom commands
 ===============
 
@@ -119,7 +126,7 @@ To read a bit :
 Acknowledgements
 ================
 
-OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by
+OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by
 several TI employees.
 
 Links
@@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
 [7] TI/Logic PD Zoom 2
 
 http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
-[8] TI OMAP3 U-Boot:
+
+[8] CompuLab Ltd. CM-T35:
+
+http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm
+
+[9] TI OMAP3 U-Boot:
 
 http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
include/configs/cm_t35.h new file +364 -0

364 lines not on this page · raw message

Signature · 1 line
1.7.3.1
#1 lore raw

PATCH 1/1 OMAP3: add CM-T35 board

Mike Rapoport wrote, on 11/23/2010 01:29 AM:
minor comments follow:
[...]

Quoted 5 lines
board/cm_t35/cm_t35.h new file +0 -0
new file mode 100644
index 0000000..514017d

[..]

Quoted 19 lines
board/cm_t35/cm_t35.h new file +19 -0
+	/*DSS*/\
+	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
+	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
+	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
+	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
+	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
+	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
+	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
+	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
+	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
+	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
+	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
+	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
+	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
+	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
+	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
+	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\

board/cm_t35/cm_t35.h line 151

Quoted 10 lines
board/cm_t35/cm_t35.h new file +10 -0
+	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
+	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\

Are you using bootlogo in CM-t35 u-boot?

board/cm_t35/cm_t35.h line 176

Quoted 2 lines
board/cm_t35/cm_t35.h new file +2 -0
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) /*CLKOUT1*/\
+	MUX_VAL(CP(SYS_CLKOUT2),	(IDIS | PTD | DIS | M4)) /*green LED*/\

might be better to state which GPIO than green led :)

board/cm_t35/cm_t35.h line 182

Quoted 7 lines
board/cm_t35/cm_t35.h new file +6 -0
+	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) /*JTAG_nTRST*/\
+	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) /*JTAG_TCK*/\
+	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) /*JTAG_TMS*/\
+	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) /*JTAG_TDI*/\
 
+	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
+	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTD | DIS | M7)) /*sdrc_cke1*/\

this tiny set probably should go along with sdrc to reflect proper functional set I guess.

Quoted 103 lines
board/cm_t35/cm_t35.h new file +2 -0
+
+#endif
board/cm_t35/config.mk new file +30 -0
new file mode 100644
index 0000000..e81e283
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2009
+# CompuLab, Ltd.,<www.compulab.co.il>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+CONFIG_SYS_TEXT_BASE = 0x80008000
boards.cfg +1 -0
index 6c2a667..e79b2d7 100644
@@ -392,6 +392,7 @@ igep0020	arm	armv7		igep0020	isee		omap3
  igep0030	arm	armv7		igep0030	isee		omap3
  am3517_evm	arm	armv7		am3517evm	logicpd		omap3
  devkit8000	arm	armv7		devkit8000	timll		omap3
+cm_t35		arm	armv7		cm_t35		-		omap3
  omap4_panda	arm	armv7		panda		ti		omap4
  omap4_sdp4430	arm	armv7		sdp4430		ti		omap4
  s5p_goni	arm	armv7		goni		samsung		s5pc1xx
doc/README.omap3 +14 -2
index 6227151..460950d 100644
@@ -21,6 +21,8 @@ Currently the following boards are supported:
 
  * TI/Logic PD Zoom 2 [7]
 
+* CompuLab Ltd. CM-T35 [8]
+
  Toolchain
  =========
 
@@ -61,6 +63,11 @@ make
  make omap3_zoom2_config
  make
 
+* CM-T35:
+
+make cm_t35_config
+make
+
  Custom commands
  ===============
 
@@ -119,7 +126,7 @@ To read a bit :
  Acknowledgements
  ================
 
-OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by
+OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by
  several TI employees.
 
  Links
@@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
  [7] TI/Logic PD Zoom 2
 
  http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
-[8] TI OMAP3 U-Boot:
+
+[8] CompuLab Ltd. CM-T35:
+
+http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm
+
+[9] TI OMAP3 U-Boot:
 
  http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
include/configs/cm_t35.h new file +0 -0
new file mode 100644
index 0000000..63a4938

include/configs/cm_t35.h line 6

Quoted 6 lines
include/configs/cm_t35.h new file +6 -0
@@ -0,0 +1,364 @@
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments.
+ * Richard Woodruff<[email protected]>
+ * Syed Mohammed Khasim<[email protected]>
+ *

2010 copyright?

include/configs/cm_t35.h line 7

Quoted 1 line
include/configs/cm_t35.h new file +1 -0
+ * Configuration settings for the TI OMAP3530 Beagle board.

^^^^ need fixes..

Quoted 25 lines
include/configs/cm_t35.h new file +25 -0
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options

[...]

Signature · 2 lines
Regards,
Nishanth Menon
#2 lore raw

PATCH 1/1 OMAP3: add CM-T35 board

Quoted 27 lines

Mike Rapoport wrote, on 11/23/2010 01:29 AM:
minor comments follow:
[...]

board/cm_t35/cm_t35.h

Quoted 5 lines
board/cm_t35/cm_t35.h new file +0 -0
new file mode 100644
index 0000000..514017d

[..]
/*DSS_DATA22*/\

board/cm_t35/cm_t35.h

Quoted 1 line
board/cm_t35/cm_t35.h new file +1 -0
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0))

/*DSS_DATA23*/\
Are you using bootlogo in CM-t35 u-boot?

board/cm_t35/cm_t35.h

Quoted 2 lines
board/cm_t35/cm_t35.h new file +2 -0
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) /*CLKOUT1*/\
+	MUX_VAL(CP(SYS_CLKOUT2),	(IDIS | PTD | DIS | M4)) /*green

LED*/\
might be better to state which GPIO than green led :)

board/cm_t35/cm_t35.h

Quoted 1 line
board/cm_t35/cm_t35.h new file +1 -0
+	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0))

/*JTAG_nTRST*/\

Quoted 3 lines
board/cm_t35/cm_t35.h new file +3 -0
+	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) /*JTAG_TCK*/\
+	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) /*JTAG_TMS*/\
+	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) /*JTAG_TDI*/\
Quoted 7 lines

board/cm_t35/cm_t35.h

Quoted 1 line
board/cm_t35/cm_t35.h new file +1 -0
+	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0))

/*sdrc_cke0*/\

board/cm_t35/cm_t35.h

Quoted 1 line
board/cm_t35/cm_t35.h new file +1 -0
+	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTD | DIS | M7))

/*sdrc_cke1*/\
this tiny set probably should go along with sdrc to reflect proper functional set I guess.

Mike can you respond to these comments from Nishanth?

I'd really like to add this 1 year old patch u-boot.

--Sandeep

#3 lore raw

PATCH 1/1 OMAP3: add CM-T35 board

In reply to Nishanth Menon

Hi Nishanth,
Sorry for the delay, some deadly virus has caught me and I was not really functional last week.

Quoted 10 lines · Nishanth Menon

Mike Rapoport wrote, on 11/23/2010 01:29 AM:
minor comments follow:
[...]

Quoted 5 lines
board/cm_t35/cm_t35.h new file +0 -0
new file mode 100644
index 0000000..514017d

[..]

Quoted 1 line
board/cm_t35/cm_t35.h new file +1 -0
+	/*DSS*/\

[ snip ]

Quoted 6 lines

board/cm_t35/cm_t35.h line 151

Quoted 5 lines
board/cm_t35/cm_t35.h new file +5 -0
+	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\

Are you using bootlogo in CM-t35 u-boot?

Not at the moment, but we'd really like to add bootlogo support. AFAIK, some of CM-T35 users already have the bootlogo support and therefore I'd prefer to have the DSS pins configured.

Quoted 4 lines

board/cm_t35/cm_t35.h line 176

Quoted 3 lines
board/cm_t35/cm_t35.h new file +2 -0
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) /*CLKOUT1*/\
+	MUX_VAL(CP(SYS_CLKOUT2),	(IDIS | PTD | DIS | M4)) /*green LED*/\

might be better to state which GPIO than green led :)

The GPIO controlling the led is not available for other functionality, so I'd prefer to keep the comment.

Quoted 9 lines

board/cm_t35/cm_t35.h line 182

Quoted 7 lines
board/cm_t35/cm_t35.h new file +6 -0
+	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) /*JTAG_nTRST*/\
+	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) /*JTAG_TCK*/\
+	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) /*JTAG_TMS*/\
+	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) /*JTAG_TDI*/\
 
+	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
+	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTD | DIS | M7)) /*sdrc_cke1*/\

this tiny set probably should go along with sdrc to reflect proper functional set I guess.

Agree

Quoted 96 lines
Quoted 96 lines
board/cm_t35/cm_t35.h new file +2 -0
+
+#endif
board/cm_t35/config.mk new file +30 -0
new file mode 100644
index 0000000..e81e283
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2009
+# CompuLab, Ltd.,<www.compulab.co.il>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+CONFIG_SYS_TEXT_BASE = 0x80008000
boards.cfg +1 -0
index 6c2a667..e79b2d7 100644
@@ -392,6 +392,7 @@ igep0020	arm	armv7		igep0020	isee		omap3
  igep0030	arm	armv7		igep0030	isee		omap3
  am3517_evm	arm	armv7		am3517evm	logicpd		omap3
  devkit8000	arm	armv7		devkit8000	timll		omap3
+cm_t35		arm	armv7		cm_t35		-		omap3
  omap4_panda	arm	armv7		panda		ti		omap4
  omap4_sdp4430	arm	armv7		sdp4430		ti		omap4
  s5p_goni	arm	armv7		goni		samsung		s5pc1xx
doc/README.omap3 +14 -2
index 6227151..460950d 100644
@@ -21,6 +21,8 @@ Currently the following boards are supported:
 
  * TI/Logic PD Zoom 2 [7]
 
+* CompuLab Ltd. CM-T35 [8]
+
  Toolchain
  =========
 
@@ -61,6 +63,11 @@ make
  make omap3_zoom2_config
  make
 
+* CM-T35:
+
+make cm_t35_config
+make
+
  Custom commands
  ===============
 
@@ -119,7 +126,7 @@ To read a bit :
  Acknowledgements
  ================
 
-OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by
+OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by
  several TI employees.
 
  Links
@@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
  [7] TI/Logic PD Zoom 2
 
  http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
-[8] TI OMAP3 U-Boot:
+
+[8] CompuLab Ltd. CM-T35:
+
+http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm
+
+[9] TI OMAP3 U-Boot:
 
Quoted 14 lines

include/configs/cm_t35.h line 6

Quoted 13 lines
doc/README.omap3 +0 -0
  http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
include/configs/cm_t35.h new file +6 -0
new file mode 100644
index 0000000..63a4938
@@ -0,0 +1,364 @@
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments.
+ * Richard Woodruff<[email protected]>
+ * Syed Mohammed Khasim<[email protected]>
+ *

2010 copyright?

Yes, of course.

Quoted 3 lines

include/configs/cm_t35.h line 7

Quoted 1 line
include/configs/cm_t35.h new file +1 -0
+ * Configuration settings for the TI OMAP3530 Beagle board.

^^^^ need fixes..

Will fix.

Quoted 26 lines
Quoted 25 lines
include/configs/cm_t35.h new file +25 -0
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options

[...]

Signature · 2 lines
Sincerely yours,
Mike.