OMAP3: add CM-T35 board
PATCH 1/1 OMAP3: add CM-T35 board
This patch adds support for CM-T35 board
--- MAINTAINERS | 4 + MAKEALL | 1 + board/cm_t35/Makefile | 47 ++++++ board/cm_t35/cm_t35.c | 222 ++++++++++++++++++++++++++++ board/cm_t35/cm_t35.h | 184 +++++++++++++++++++++++ board/cm_t35/config.mk | 30 ++++ boards.cfg | 1 + doc/README.omap3 | 16 ++- include/configs/cm_t35.h | 364 ++++++++++++++++++++++++++++++++++++++++++++++ 9 files changed, 867 insertions(+), 2 deletions(-) create mode 100644 board/cm_t35/Makefile create mode 100644 board/cm_t35/cm_t35.c create mode 100644 board/cm_t35/cm_t35.h create mode 100644 board/cm_t35/config.mk create mode 100644 include/configs/cm_t35.h
MAINTAINERS +4 -0
@@ -750,6 +750,10 @@ Stelian Pop <[email protected]> at91sam9263ek ARM926EJS (AT91SAM9263 SoC) at91sam9rlek ARM926EJS (AT91SAM9RL SoC) +Mike Rapoport <[email protected]> + + cm_t35 ARM ARMV7 (OMAP3xx SoC) + Tom Rix <[email protected]> omap3_zoom2 ARM ARMV7 (OMAP3xx SoC)
MAKEALL +1 -0
@@ -412,6 +412,7 @@ LIST_ARM11=" \ LIST_ARMV7=" \ am3517_evm \ ca9x4_ct_vxp \ + cm_t35 \ devkit8000 \ igep0020 \ igep0030 \
board/cm_t35/Makefile new file +47 -0
47 lines not on this page · raw message
board/cm_t35/cm_t35.c new file +222 -0
222 lines not on this page · raw message
board/cm_t35/cm_t35.h new file +184 -0
184 lines not on this page · raw message
board/cm_t35/config.mk new file +30 -0
@@ -0,0 +1,30 @@ +# +# (C) Copyright 2009 +# CompuLab, Ltd., <www.compulab.co.il> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +CONFIG_SYS_TEXT_BASE = 0x80008000
boards.cfg +1 -0
@@ -392,6 +392,7 @@ igep0020 arm armv7 igep0020 isee omap3 igep0030 arm armv7 igep0030 isee omap3 am3517_evm arm armv7 am3517evm logicpd omap3 devkit8000 arm armv7 devkit8000 timll omap3 +cm_t35 arm armv7 cm_t35 - omap3 omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 s5p_goni arm armv7 goni samsung s5pc1xx
doc/README.omap3 +14 -2
@@ -21,6 +21,8 @@ Currently the following boards are supported: * TI/Logic PD Zoom 2 [7] +* CompuLab Ltd. CM-T35 [8] + Toolchain =========
@@ -61,6 +63,11 @@ make make omap3_zoom2_config make +* CM-T35: + +make cm_t35_config +make + Custom commands ===============
@@ -119,7 +126,7 @@ To read a bit : Acknowledgements ================ -OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by +OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by several TI employees. Links
@@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit [7] TI/Logic PD Zoom 2 http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf -[8] TI OMAP3 U-Boot: + +[8] CompuLab Ltd. CM-T35: + +http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm + +[9] TI OMAP3 U-Boot: http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
include/configs/cm_t35.h new file +364 -0
364 lines not on this page · raw message
Signature · 1 line
1.7.3.1
PATCH 1/1 OMAP3: add CM-T35 board
Mike Rapoport wrote, on 11/23/2010 01:29 AM:
minor comments follow:
[...]
Quoted 5 lines
board/cm_t35/cm_t35.h new file +0
-0
[..]
Quoted 19 lines
board/cm_t35/cm_t35.h new file +19
-0+/*DSS*/ \ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ +MUX_VAL (CP (DSS_DATA13 ), (IDIS |PTD |DIS |M0 ))/*DSS_DATA13*/ \
board/cm_t35/cm_t35.h line 151
Quoted 10 lines
board/cm_t35/cm_t35.h new file +10
-0+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ +MUX_VAL (CP (DSS_DATA23 ), (IDIS |PTD |DIS |M0 ))/*DSS_DATA23*/ \
Are you using bootlogo in CM-t35 u-boot?
board/cm_t35/cm_t35.h line 176
Quoted 2 lines
board/cm_t35/cm_t35.h new file +2
-0+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*CLKOUT1*/\ +MUX_VAL (CP (SYS_CLKOUT2 ), (IDIS |PTD |DIS |M4 ))/*green LED*/ \
might be better to state which GPIO than green led :)
board/cm_t35/cm_t35.h line 182
Quoted 7 lines
board/cm_t35/cm_t35.h new file +6
-0+ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ +MUX_VAL (CP (SDRC_CKE1 ), (IDIS |PTD |DIS |M7 ))/*sdrc_cke1*/ \
this tiny set probably should go along with sdrc to reflect proper functional set I guess.
Quoted 103 lines
board/cm_t35/cm_t35.h new file +2
-0+ +#endif board/cm_t35/config.mk new file +30
-0@@ -0,0 +1,30 @@ +# +# (C) Copyright 2009 +# CompuLab, Ltd.,<www.compulab.co.il> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +CONFIG_SYS_TEXT_BASE = 0x80008000boards.cfg +1
-0@@ -392,6 +392,7 @@ igep0020 arm armv7 igep0020 isee omap3 igep0030 arm armv7 igep0030 isee omap3 am3517_evm arm armv7 am3517evm logicpd omap3 devkit8000 arm armv7 devkit8000 timll omap3 +cm_t35 arm armv7 cm_t35 - omap3 omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 s5p_goni arm armv7 goni samsung s5pc1xxdoc/README.omap3 +14
-2@@ -21,6 +21,8 @@ Currently the following boards are supported: * TI/Logic PD Zoom 2 [7] +* CompuLab Ltd. CM-T35 [8] + Toolchain =========@@ -61,6 +63,11 @@ make make omap3_zoom2_config make +* CM-T35: + +make cm_t35_config +make + Custom commands ===============@@ -119,7 +126,7 @@ To read a bit : Acknowledgements ================ -OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by +OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by several TI employees. Links@@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit [7] TI/Logic PD Zoom 2 http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf -[8] TI OMAP3 U-Boot: + +[8] CompuLab Ltd. CM-T35: + +http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm + +[9] TI OMAP3 U-Boot: http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gzinclude/configs/cm_t35.h new file +0
-0
include/configs/cm_t35.h line 6
Quoted 6 lines
include/configs/cm_t35.h new file +6
-0@@ -0,0 +1,364 @@ +/* +* (C) Copyright 2006-2008 +* Texas Instruments. +* Richard Woodruff<[email protected]> +* Syed Mohammed Khasim<[email protected]> +*
2010 copyright?
include/configs/cm_t35.h line 7
Quoted 1 line
include/configs/cm_t35.h new file +1
-0+* Configuration settings for the TI OMAP3530 Beagle board.
^^^^ need fixes..
Quoted 25 lines
include/configs/cm_t35.h new file +25
-0+* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* +* High Level Configuration Options
[...]
Signature · 2 lines
Regards, Nishanth Menon
Paulraj
PATCH 1/1 OMAP3: add CM-T35 board
Quoted 27 lines
Mike Rapoport wrote, on 11/23/2010 01:29 AM:
minor comments follow:
[...]board/cm_t35/cm_t35.h
Quoted 5 lines
board/cm_t35/cm_t35.h new file +0
-0[..]
/*DSS_DATA22*/\board/cm_t35/cm_t35.h
Quoted 1 line
board/cm_t35/cm_t35.h new file +1
-0+MUX_VAL (CP (DSS_DATA23 ), (IDIS |PTD |DIS |M0 ))/*DSS_DATA23*/\
Are you using bootlogo in CM-t35 u-boot?board/cm_t35/cm_t35.h
Quoted 2 lines
board/cm_t35/cm_t35.h new file +2
-0+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*CLKOUT1*/\ +MUX_VAL (CP (SYS_CLKOUT2 ), (IDIS |PTD |DIS |M4 ))/*green LED*/\
might be better to state which GPIO than green led :)board/cm_t35/cm_t35.h
Quoted 1 line
board/cm_t35/cm_t35.h new file +1
-0+MUX_VAL (CP (JTAG_nTRST), (IEN |PTD |DIS |M0 ))/*JTAG_nTRST*/\
Quoted 3 lines
board/cm_t35/cm_t35.h new file +3
-0+ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ +MUX_VAL (CP (JTAG_TDI ), (IEN |PTD |DIS |M0 ))/*JTAG_TDI*/ \
Quoted 7 lines
board/cm_t35/cm_t35.h
Quoted 1 line
board/cm_t35/cm_t35.h new file +1
-0+MUX_VAL (CP (SDRC_CKE0 ), (IDIS |PTU |EN |M0 ))/*sdrc_cke0*/\
board/cm_t35/cm_t35.h
Quoted 1 line
board/cm_t35/cm_t35.h new file +1
-0+MUX_VAL (CP (SDRC_CKE1 ), (IDIS |PTD |DIS |M7 ))/*sdrc_cke1*/\
this tiny set probably should go along with sdrc to reflect proper functional set I guess.
Mike can you respond to these comments from Nishanth?
I'd really like to add this 1 year old patch u-boot.
--Sandeep
PATCH 1/1 OMAP3: add CM-T35 board
In reply to Nishanth MenonHi Nishanth,
Sorry for the delay, some deadly virus has caught me and I was not really functional last week.
Quoted 10 lines · Nishanth Menon
Mike Rapoport wrote, on 11/23/2010 01:29 AM:
minor comments follow:
[...]Quoted 5 lines
board/cm_t35/cm_t35.h new file +0
-0[..]
Quoted 1 line
board/cm_t35/cm_t35.h new file +1
-0+/*DSS*/ \
[ snip ]
Quoted 6 lines
board/cm_t35/cm_t35.h line 151
Quoted 5 lines
board/cm_t35/cm_t35.h new file +5
-0+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ +MUX_VAL (CP (DSS_DATA23 ), (IDIS |PTD |DIS |M0 ))/*DSS_DATA23*/ \Are you using bootlogo in CM-t35 u-boot?
Not at the moment, but we'd really like to add bootlogo support. AFAIK, some of CM-T35 users already have the bootlogo support and therefore I'd prefer to have the DSS pins configured.
Quoted 4 lines
board/cm_t35/cm_t35.h line 176
Quoted 3 lines
board/cm_t35/cm_t35.h new file +2
-0+ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*CLKOUT1*/\ +MUX_VAL (CP (SYS_CLKOUT2 ), (IDIS |PTD |DIS |M4 ))/*green LED*/ \might be better to state which GPIO than green led :)
The GPIO controlling the led is not available for other functionality, so I'd prefer to keep the comment.
Quoted 9 lines
board/cm_t35/cm_t35.h line 182
Quoted 7 lines
board/cm_t35/cm_t35.h new file +6
-0+ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ +MUX_VAL (CP (SDRC_CKE1 ), (IDIS |PTD |DIS |M7 ))/*sdrc_cke1*/ \this tiny set probably should go along with sdrc to reflect proper functional set I guess.
Agree
Quoted 96 lines
Quoted 96 lines
board/cm_t35/cm_t35.h new file +2
-0+ +#endif board/cm_t35/config.mk new file +30
-0@@ -0,0 +1,30 @@ +# +# (C) Copyright 2009 +# CompuLab, Ltd.,<www.compulab.co.il> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +CONFIG_SYS_TEXT_BASE = 0x80008000boards.cfg +1
-0@@ -392,6 +392,7 @@ igep0020 arm armv7 igep0020 isee omap3 igep0030 arm armv7 igep0030 isee omap3 am3517_evm arm armv7 am3517evm logicpd omap3 devkit8000 arm armv7 devkit8000 timll omap3 +cm_t35 arm armv7 cm_t35 - omap3 omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 s5p_goni arm armv7 goni samsung s5pc1xxdoc/README.omap3 +14
-2@@ -21,6 +21,8 @@ Currently the following boards are supported: * TI/Logic PD Zoom 2 [7] +* CompuLab Ltd. CM-T35 [8] + Toolchain =========@@ -61,6 +63,11 @@ make make omap3_zoom2_config make +* CM-T35: + +make cm_t35_config +make + Custom commands ===============@@ -119,7 +126,7 @@ To read a bit : Acknowledgements ================ -OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by +OMAP3 U-Boot is based on U-Boot tar ball [9] for BeagleBoard and EVM done by several TI employees. Links@@ -153,6 +160,11 @@ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit [7] TI/Logic PD Zoom 2 http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf -[8] TI OMAP3 U-Boot: + +[8] CompuLab Ltd. CM-T35: + +http://www.compulab.co.il/t3530/html/t3530-cm-datasheet.htm + +[9] TI OMAP3 U-Boot:
Quoted 14 lines
include/configs/cm_t35.h line 6
Quoted 13 lines
doc/README.omap3 +0
-0http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gzinclude/configs/cm_t35.h new file +6
-0@@ -0,0 +1,364 @@ +/* +* (C) Copyright 2006-2008 +* Texas Instruments. +* Richard Woodruff<[email protected]> +* Syed Mohammed Khasim<[email protected]> +* 2010 copyright?
Yes, of course.
Quoted 3 lines
include/configs/cm_t35.h line 7
Quoted 1 line
include/configs/cm_t35.h new file +1
-0+* Configuration settings for the TI OMAP3530 Beagle board. ^^^^ need fixes..
Will fix.
Quoted 26 lines
Quoted 25 lines
include/configs/cm_t35.h new file +25
-0+* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* +* High Level Configuration Options [...]
Signature · 2 lines
Sincerely yours, Mike.