davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs
Subsystems (3)
PATCH v2 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs
From: Sudhakar Rajashekhara <[email protected]>
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
This patch is orignally from a patch on the arago project, here:
http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7
Further information related to the need for this patch can be located at
http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx
http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.html
This patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card.
---
This is against davinci-linux tree.
Changes since v1:
- Changed "from" author to Sudhakar Rajashekhara
- Added Nicolas Luna as reporter.
- Added Test information.
- Added reference links in description
arch/arm/mach-davinci/da850.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)
arch/arm/mach-davinci/da850.c +7 -0
@@ -764,6 +764,13 @@ static struct davinci_id da850_ids[] = { .cpu_id = DAVINCI_CPU_ID_DA850, .name = "da850/omap-l138", }, + { + .variant = 0x1, + .part_no = 0xb7d1, + .manufacturer = 0x017, /* 0x02f >> 1 */ + .cpu_id = DAVINCI_CPU_ID_DA850, + .name = "da850/omap-l138/am18xx", + }, };static struct davinci_timer_instance da850_timer_instance[4 ] = {
Signature · 1 line
1.7.0.4
PATCH v2 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs
Hello.
Quoted 14 lines · Michael Williamson
From: Sudhakar Rajashekhara<[email protected]>
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
This patch is orignally from a patch on the arago project, here:
http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7Further information related to the need for this patch can be located at
http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx
http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.html
Quoted 6 lines
This patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card.
Signed-off-by Michael Williamson <[email protected]>Tested-by Michael Williamson <[email protected]>Reported-by Nicolas Luna <[email protected]>
I saw that the original patch was signed off by Sudhakar -- why you
omitted that?
WBR, Sergei
PATCH v2 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs
Hello Sergei,
Quoted 18 lines · Sergei Shtylyov
Hello.
Quoted 13 lines · Michael Williamson
From: Sudhakar Rajashekhara<[email protected]>
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
This patch is orignally from a patch on the arago project, here:
http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7Further information related to the need for this patch can be located at
http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx
http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.html
Quoted 9 lines
Quoted 6 lines
This patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card.
Signed-off-by Michael Williamson <[email protected]>Tested-by Michael Williamson <[email protected]>Reported-by Nicolas Luna <[email protected]>I saw that the original patch was signed off by Sudhakar -- why you omitted that?
Ignorance, mostly...
That patch was for the Arago project, and not the mainline, and I wasn't sure if I could add a sign-off with express instruction from Sudhakar. Wasn't trying to slight anyone...
I will add Sudhakar's sign-off, assuming that is OK with Sudhakar.
Should I remove my sign-off?
Thanks for the help.
-Mike
PATCH v2 1/1 davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs
Hello.
Quoted 24 lines · Michael Williamson
Quoted 13 lines
Quoted 12 lines
From: Sudhakar Rajashekhara<[email protected]>
The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. In addition, the variant code for the AM-1808 SoC appears to match the Rev-2.0 code for the OMAP-L138. Add an additional entry to support these chips.
This patch is orignally from a patch on the arago project, here:
http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7
Further information related to the need for this patch can be located at
http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx
http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.htmlQuoted 8 lines
Quoted 6 lines
This patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card.
Signed-off-by Michael Williamson <[email protected]>Tested-by Michael Williamson <[email protected]>Reported-by Nicolas Luna <[email protected]>I saw that the original patch was signed off by Sudhakar -- why you omitted that?
Ignorance, mostly...
Quoted 7 lines
That patch was for the Arago project, and not the mainline, and I wasn't sure if I could add a sign-off with express instruction from Sudhakar. Wasn't trying to slight anyone...
I will add Sudhakar's sign-off, assuming that is OK with Sudhakar.
Should I remove my sign-off?
No.
Quoted 3 lines
Thanks for the help.
-Mike
WBR, Sergei