Skip to contentSkip to conversation

ARM STM/i.MX: Add possibility to choose the bit per pixel for STM video driver

PATCH In review Gregory CLEMENT 1 participant 1 message Jan 4, 2011

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 2/4 ARM STM/i.MX: Add possibility to choose the bit per pixel for STM video driver

When describing an new video interface, it is now possible to select the bit per pixel. If nothing is chosen 16bpp is selected by default.

---
 arch/arm/mach-stm/include/mach/fb.h |    1 +
 drivers/video/stm.c                 |    5 ++++-
 2 files changed, 5 insertions(+), 1 deletions(-)
arch/arm/mach-stm/include/mach/fb.h +1 -0
index 65e3be2..da71f10 100644
@@ -37,6 +37,7 @@ struct imx_fb_videomode {
 
 	unsigned dotclk_delay;	/**< refer manual HW_LCDIF_VDCTRL4 register */
 	unsigned ld_intf_width;	/**< refer STMLCDIF_* macros */
+	u32 bits_per_pixel;
 };
 
 #endif /* __MACH_FB_H */
drivers/video/stm.c +4 -1
index 8a9acff..5035cd0 100644
@@ -496,7 +496,10 @@ static int stmfb_probe(struct device_d *hw_dev)
 	fbi.info.mode = &fbi.info.mode_list[0];
 	fbi.info.xres = fbi.info.mode->xres;
 	fbi.info.yres = fbi.info.mode->yres;
-	fbi.info.bits_per_pixel = 16;
+	if (pdata->bits_per_pixel)
+		fbi.info.bits_per_pixel = pdata->bits_per_pixel;
+	else
+		fbi.info.bits_per_pixel = 16;
 
 	size = calc_line_length(fbi.info.mode->xres, fbi.info.bits_per_pixel) *
 		fbi.info.mode->yres;
Signature · 9 lines
1.7.0.4




_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox