Skip to contentSkip to conversation

b43: N-PHY: enable support for PHYs rev 3 and higher

PATCH New Rafał Miłecki 3 participants 5 messages Dec 21, 2010 – Jan 4, 2011 Networking drivers (wireless)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 b43: N-PHY: enable support for PHYs rev 3 and higher

---
John: can we still make it for 2.6.38 merge? It was tested with 14e4:432b, support seems to be on the same level as for PHYs 1 and 2.

---
 drivers/net/wireless/b43/main.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/wireless/b43/main.c +1 -1
index 5fb0bc6..22bc9f1 100644
@@ -4056,7 +4056,7 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 		break;
 #ifdef CONFIG_B43_PHY_N
 	case B43_PHYTYPE_N:
-		if (phy_rev > 2)
+		if (phy_rev > 9)
 			unsupported = 1;
 		break;
 #endif
Signature · 1 line
1.6.3.3
#1 lore raw

PATCH 1/1 b43: N-PHY: enable support for PHYs rev 3 and higher

W dniu 21 grudnia 2010 21:29 u?ytkownik Rafa? Mi?ecki <[email protected]> napisa?:

Quoted 4 lines

---
John: can we still make it for 2.6.38 merge? It was tested with 14e4:432b, support seems to be on the same level as for PHYs 1 and 2.

John, I dont see patches for rev3+ in wireless-testing. Any problems with them?

It means:
[PATCH 1/4] b43: use correct firmware for newer cores [PATCH 2/4 v2] b43: N-PHY: implement radio 2056 init steps [PATCH 3/4] b43: N-PHY: add init tables for 2056 radio [PATCH 4/4] b43: N-PHY: avoid PHY hangs for rev 3 and 4

[PATCH 1/2] b43: N-PHY: use correct channel tables for rev4+ [PATCH 2/2 v2] b43: N-PHY: update 2056 radio on channel switch on rev3+ and this one.

Signature · 1 line
Rafa?
#2 lore raw

PATCH 1/1 b43: N-PHY: enable support for PHYs rev 3 and higher

Quoted 15 lines · Rafał Miłecki

W dniu 21 grudnia 2010 21:29 użytkownik Rafał Miłecki

Quoted 4 lines · <[email protected]> napisał:

---
John: can we still make it for 2.6.38 merge? It was tested with 14e4:432b, support seems to be on the same level as for PHYs 1 and 2.

John, I dont see patches for rev3+ in wireless-testing. Any problems with them?

It means:
[PATCH 1/4] b43: use correct firmware for newer cores [PATCH 2/4 v2] b43: N-PHY: implement radio 2056 init steps [PATCH 3/4] b43: N-PHY: add init tables for 2056 radio [PATCH 4/4] b43: N-PHY: avoid PHY hangs for rev 3 and 4

Quoted 3 lines

[PATCH 1/2] b43: N-PHY: use correct channel tables for rev4+ [PATCH 2/2 v2] b43: N-PHY: update 2056 radio on channel switch on rev3+ and this one.

John,

I have been testing these patches with a 14e4:432b device for at least two weeks. With them, the driver still does not handle WPA/WPA2 encryption and falls over with OFDM rates, but it is rock solid with WEP encryption and at 11 Mb/s. Rafał and I have some ideas why the limitations, but the holidays have interfered with debugging.

Larry

#3 lore raw

PATCH 1/1 b43: N-PHY: enable support for PHYs rev 3 and higher

Quoted 22 lines · Larry Finger
Quoted 15 lines · Rafa? Mi?ecki

W dniu 21 grudnia 2010 21:29 u?ytkownik Rafa? Mi?ecki <[email protected]> napisa?:

Quoted 4 lines

---
John: can we still make it for 2.6.38 merge? It was tested with 14e4:432b, support seems to be on the same level as for PHYs 1 and 2.

John, I dont see patches for rev3+ in wireless-testing. Any problems with them?

It means:
[PATCH 1/4] b43: use correct firmware for newer cores [PATCH 2/4 v2] b43: N-PHY: implement radio 2056 init steps [PATCH 3/4] b43: N-PHY: add init tables for 2056 radio [PATCH 4/4] b43: N-PHY: avoid PHY hangs for rev 3 and 4

Quoted 3 lines

[PATCH 1/2] b43: N-PHY: use correct channel tables for rev4+ [PATCH 2/2 v2] b43: N-PHY: update 2056 radio on channel switch on rev3+ and this one.

John,

Quoted 7 lines

I have been testing these patches with a 14e4:432b device for at least two weeks. With them, the driver still does not handle WPA/WPA2 encryption and falls over with OFDM rates, but it is rock solid with WEP encryption and at 11 Mb/s. Rafa? and I have some ideas why the limitations, but the holidays have interfered with debugging.

Larry

And with merging...

I hope to get caught-up soon.

John

Signature · 2 lines
John W. Linville		Someday the world will need a hero, and you
linville at tuxdriver.com			might be all we have.  Be ready.
#4 lore raw

PATCH 1/1 b43: N-PHY: enable support for PHYs rev 3 and higher

Quoted 29 lines · John W. Linville
Quoted 28 lines · Larry Finger
Quoted 15 lines · Rafał Miłecki

W dniu 21 grudnia 2010 21:29 użytkownik Rafał Miłecki

Quoted 4 lines · <[email protected]> napisał:

---
John: can we still make it for 2.6.38 merge? It was tested with 14e4:432b, support seems to be on the same level as for PHYs 1 and 2.

John, I dont see patches for rev3+ in wireless-testing. Any problems with them?

It means:
[PATCH 1/4] b43: use correct firmware for newer cores [PATCH 2/4 v2] b43: N-PHY: implement radio 2056 init steps [PATCH 3/4] b43: N-PHY: add init tables for 2056 radio [PATCH 4/4] b43: N-PHY: avoid PHY hangs for rev 3 and 4

Quoted 3 lines

[PATCH 1/2] b43: N-PHY: use correct channel tables for rev4+ [PATCH 2/2 v2] b43: N-PHY: update 2056 radio on channel switch on rev3+ and this one.

John,

I have been testing these patches with a 14e4:432b device for at least two weeks. With them, the driver still does not handle WPA/WPA2 encryption and falls over with OFDM rates, but it is rock solid with WEP encryption and at 11 Mb/s. Rafał and I have some ideas why the limitations, but the holidays have interfered with debugging.

Quoted 5 lines
Quoted 1 line

Larry

And with merging...

I hope to get caught-up soon.

I hope there are some rtlwifi/rtl8192ce updates there as well. I'll wait for some new merges before I bug you about the specific patches.

Larry